PROVN OF OPEN PAVED AREA WITH STAGE PLATFORM AT SSOI UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation etc or for shafts, wells n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement incl mixing with WPC as per manufacturers instruction complete all as specified and directed. Note : WPC shall be measured and paid seperately as supply only

Supply only Integral water proofing compound ISI marked complete all as specified and directed.

Removing excavated soil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L hardcore of Broken stone /Boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.

S & F steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes conforiming to IS 1161-1979 graded St-240 complete all as specified and as directed.

M&L 20mm thick Granite work (table rubbed & polished) (Rajasthan black) as in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over & incl 15 mm screed thick in cement mortar 1:6 incl dismantlling old stone any type complete all as specified and directed.

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed .

M&L prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strenght of 550 Mpa as in ridge / roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L preparation of new steel surface of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed.

M & L coloured joint free full body vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm as in vertical surface such as dado, skirting etc over & including chemical adhesive of exterior grade of approved thickness on plastered surfaces complete all as approved and directed.

M&L homogenous full body Vitrified Ceramic tiles 8-10mm thick (square/rectangular) Matt finish, area of each tiles exc 0.36 sqm and not exc 0.72 sqm in floors etc and jointed with chemical adhesive of exterior grade of approved thickness using spacers and space between tiles to be filled with epoxy of colour matching the shade of tile after cleaning spaces properly

M & L for 3mm thick Aluminium composite panel Sheet of approved colour and design for Wall cladding & Ceileing etc. in roofing and sides of framed poles cut to size, holes punched, including round headed screws, clout nails or rivets etc fixed with all necessary arrangment to frames complete all as specified and directed by EIC.

M&L RCC M-25 (Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.

M&L RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.

S&F Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified.

,---ditto--- all as per item No 21 but 6mm to 8mm dia complete all as specified and directed.

M & L for form work for flat fair finish surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc.and similar items complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings , railings, framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and as directed

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

S & F Mild steel bolts (purpose made) diameter of neck exc 20mm but n exc 25mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and complete all as specified and directed.

M&L for preparing of new surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint (of approved colour) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

Supply and laying factory made unreinforced pre-cast concrete cable protection cover LV class, type-I, flat of size 250mm X 150mm X 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection laid on the top of the sand cushioning complete all as specified and directed.

M & L Sand cushioning to under ground cable with screened and washed sand (non cohessive), 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness shall be considered for payment purpose.

S & F 50 mm bore GI tubing "light grade" with all fittings, fixed to wall/ pole with suitable size MS clamp, nut, bolt, washer etc or laid under road crossing etc as reqd for protection of cable incl painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Note : Cost of MS clamp, nut bolt, washer and GI fittings etc shall be inclusive in the quoted rates.

Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC sheathed, galvanised steel strips or wire armoured, heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade cross sectional area 70sqmm, 3.5core confirming to IS:7098 (part-I), laid in trenches, ducts, pipes or fixed on poles or walls including all necessary clamps, nut, bolt, washers, saddle etc complete all as specfied and directed. Note : The cost of AI thimbles / lugs and cable gland etc is included in quoted raes.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6.0mm buried directly in ground, vertically to depth not less than 2.25mtr below normal ground level with top edge of the earth plate at depth not less than 1.5 metre below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI lead wire 4.0mm dia by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe medium grade 20mm bore for watering, 40mm bore GI pipe medium grade for protection of GI wire upto test point including providing funnel and wire mesh GI frame and 10cm thick suitably reinforced RCC pit cover, PCC chamber pit with PCC (1:3:6) type C2 using 40mm graded stone aggregates complete including excavation and earth work in any type of strata, disposal of surplus soil to a distance not exceeding 50 mtr, all as specified ans shown in Electrical plate No. 3 of SSR Part-1, PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion complete. (Note - GI lead wire size 4.0mm upto 7.5 m included in the item).

M&L for point wiring with 1100 volts grade PVC insulated, unsheathed, FRLS multistranded copper conductor cable, single core, 1.5 sqmm (Phase - Red, Neutral - Black) alongwith earth continuity conductor 1.5 sqmm (Green) drawn through and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick mounting in the wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for One 3 pin, 5 Amp socket outlet on same board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated, unsheathed, FRLS multistranded copper conductor cable, single core, 4 sqmm (Phase - Red, Neutral - Black) alongwith earth continuity conductor 4 sqmm (Green) drawn through and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick mounting in the wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for One 3 pin, 16 Amp socket outlet on independent board complete all as specified and directed.

S&F modular switch 6 Amps, one way, 240 volts, 1 module complete all as specified and directed.

S&F modular switch 16 Amps, one way, 240 volts, 1 module complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined, 2 module AC 240 volts complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core, 1100 V, PVC insulated, unsheathed, FRLS multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 25mm dia ISI marked ivory colour & fitting / fixing accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.

S&F MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F MCBs of 'B' curve double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs Distribution board TPN, 4 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F MCBs of 'B' curve four pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F LED flood light 100 watt, 230 V AC highly efficient integral type mid power made of pressure die cast aluminium housing with 10KV SPD toughened glass w/o lens, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Rakesh Choudhary Contractor (BID ID -3356957)

M/s KAKSI ENTERPRISES (BID ID -3348294)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3343760)

M/S Anil Enterprises (BID ID -3348617)