Maintenance and Repairs to LH tower, Powerhouse, Allied buildings and compound wall etc., at Vengurla point lighthouse station.

Amount

Painting two coats with synthetic enemal paint of approved Ist quality (Asian/Berger/Shalimar-high glossy) on previously painted exterior surface of lighthouse tower after scraping, brooming, sand papering, cleaning all dirt & dust and preparation of surface smooth with necessary repairs at all heights and as directed including the cost of all materials,labours,tools & plants, necessary scaffolding/ basoom chair with safety belt and all other charges etc., complete.

Painting two coats with synthetic enemal paint of approved Ist quality (Asian/Berger/Shalimar-high glossy) on previously painted interior surface of lighthouse tower to give an even shade after scraping, brooming, sand papering, cleaning all dirt & dust and preparation of surface smooth with necessary repairs at all heights and as directed including the cost of all materials,labours,tools & plants, ladder and all other charges etc., complete.

Painting two coats with Acrylic Smooth exterior paint of required shade : of approved Ist quality (Asian/Berger/Shalimar-high glossy) on previously painted exterior wall surface of allied buildings to give an even shade after scraping, brooming, sand papering, cleaning all dirt & dust and preparation of surface smooth at all height and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Painting two coats with premium acrylic emulsion paint interior grade of Ist quality approved brand and manufacture(Asian/Berger/Shalimar-high glossy), including applying additional coats wherever required to achieve even shade and colour after removing old white wash by scrapping, sand papering, preparing the surface smooth including necessary repairs to scratches etc., applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Painting two coats with premium acrylic emulsion paint interior grade of Ist quality approved brand and manufacture(Asian/Berger/Shalimar-high glossy), on previously painted interior wall surface of navtex rooms including applying additional coats wherever required to achieve even shade and colour after preparing the surface smooth at all height including necessary repairs to scratches etc., and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Painting two coats with Acrylic Smooth exterior paint of Ist quality approved brand and manufacture(Asian/Berger/Shalimar-high glossy), on previously painted compound wall surfaces including applying additional coats wherever required to achieve even shade and colour after preparing the surface smooth including necessary repairs to scratches etc., and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Painting two coats with French spirit polishing of Ist quality approved brand and manufacture(Asian/Berger/Shalimar-high glossy), on previously polished wodden furnire including applying additional coats wherever required to achieve even shade and colour after preparing the surface smooth including necessary repairs to scratches etc., and as directed including the cost of all materials,labours,tools & plants r and all other charges etc., complete.

Cupboard

Chairs

Easy chairs

Met safe

Dinning table

Dinning chairs

Table

working table

towel stand

cot stand

Painting two coats with synthetic enemal paint of Ist quality approved brand and manufacture(Asian/Berger/Shalimar-high glossy), on previously painted metal surfaces over a coat of metal primer (zinc chromate) wherever necessary including applying additional coats wherever required to achieve even shade and colour after preparing the surface smooth and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

a) MS Ladder

b) Trap door

c) Top hand railing

d) MS main gate

e) Wicket gate

f) compound's rear gate

Painting two coats with synthetic enemal paint of approved Ist quality (Asian/Berger/Shalimar-high glossy) on previously painted doors & windows over a coat of wood base primer wherever necessary to give an even shade after scraping, brooming, sand papering, cleaning all dirt & dust and preparation of surface smooth with necessary repairs and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and laying in position specified grade of cement concrete,including the cost of centering, shuttering, removal and finishing up to plinth level : in 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) after preparation of bottom surface and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete. (Re-surfacing with 100 mm thick)

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.verticalstuds of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels.The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and laying in situ five course water proofing treatment with APP (Atactic Poly propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and laying vitrified floor tiles in 11.41.2 Size of Tile 600x600 mm sizes 10 mm thickness over existing IPS flooring with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., after chipping the surface and prepared for tiles laying and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more10 mm thickness, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades on existing IPS flooring after chipping the surface and prepar the surface good for laying tiles, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and fixing 8 mm thick glazed ceramic tiles of size 595 x595 mm on wall surface of 1st quality conforming to IS : 15622, of approved make, in all colours, shades on existing IPS flooring after chipping the surface and prepar the surface good for fixing tiles on wall sarface in Cement Mortar 1:3 (1 Cement : 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and fixing Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved ist quality and Pink plain in colour over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing and as directed including the cost of all materials,labours,tools & plants and all other charges etc.,

Providing and fixing Stainless Steel Sink of size 610x510 mm bowl depth 200 mm A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, fixed in position including painting of fittings and brackets, cutting and making good the walls wherever required and as directed including the cost of all materials,labours,tools & plants and all other charges etc.,

Cracks repair on wall surfaces, routed out/making V-shape groove size 25x25mm and then filled the area with 1:3 CM (1, cement, 3 fine sand) and while the surface is tacky filled the groove upto surface and finished with appying wall putty over repair area and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, With cement mortar 1:4 (1 cement : 4 fine sand) including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Replacement of fly proof wire gauze of approved Ist quality to windows, clerestory windows etc., with wooden frame after removing old detoriorated un serviceable fly proof, fixed in position and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Replacement glass panes in door &window and refixing existing wooden fillets in position of nominal thickness 5 mm (weight not less than 12.5kg/sqm) and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Taking out existing wooden door shutter and repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames,including replacement of hinges with screws, etc. as required, and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Replacement of doors & window fittings & fixtures, fixed in position after removing old fittins & fixtures in existing wooden door & windows, and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

a) Al. Aldrop 250 mm

b) Al. Aldrop 150 mm

c) Al. Tower bolt 250 mm

d) Al. Tower bolt 150 mm

e) Al. Hinges 100 mm

f) Al. Hinges 75 mm

g) Brass.Handles 125 mm

h) Brass.Handles 75 mm

Repairs wooden furnitures after removing danaged wooden parts and re-fixing in position of same size and shape as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

a) Cots

b) Dinning table

c) Chairs

d) Centre table

e) Meat safe

f) office table

g) Ply wood sheet 6'x3'

h) sun mica 4'x3'

a) Providing and Fixing factory made uPVC door frame,sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including fixing 3 nos of 125 mm long stainless steel hinges to the frame with jamb with required number & size of anchor dash fastners and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

b) 35 mm thick factory made Solid panel PVC Door shutter with non decorative finish (matt finish) made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

Providing and fixing cover to Genset consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on basement with shear studs fixed in position and as directed including the cost of all materials,labours,tools & plants and all other charges etc., complete.

LUCKY DECOR

Unitech Construction