MDU Division: (a). Provision of FOB and raising of RLPF to HLPF at SMDM & SDNR stations. (b). Raising of platforms to High level at 18 stations (MES, VDP, EKN, BJM, APK, KZB, KZY, PCO, AYVN, KCHV, KTYR, AWT, CTPE, MC, MPA, AYV, TML & KTHY) stations.- Power supply arrangements, wiring and installations

SWA-Power Supply Arrangements

Supply and fixing of cable route indicator, cast iron plate type as per enclosed drawing and specifications

Excavation of trench in all kinds of soil including refilling as per specification

Excavation of Cable trench across the concrete flooring / road / track as per specification

Breaking of cement concrete flooring and disposal of material as directed by the Senior section Engineer in-charge

Providing and laying in position cement concrete of 1:3:6 proportion (1 cement :3 sand:6 graded stone aggregate 20mm nominal size)

Laying of HDPE pipes

Drawing of LTUG cables in the existing HDPE pipe laid in the excavated cable trench.

Supply and laying of 6 SWG GI wire

Supply,erection and testing of earthing arrangements

Laying of LTUG cable with required termination.

Clamping of LTUG Cable on the wall/structure with painted MS clamps of suitable size with fixing hardwares.( Only cable will be supplied by Railways)

Supply, erection, testing and commissioning of TPN, Re-wire able Switch fuse unit, 100A,415V Similar to STANDARD make Model No:ISFRTE4100

SWB-Wiring and installation for raising of PF

Supply and wiring including termination by 3 No's of 1.5 sq.mm PVC insulated flexible copper cables confirming IS No. 694,1100V grade through the existing PVC pipe already laid.

Supply, erection, testing and commissioning of Timer switch lighting control panel 2 500(L)X600(H)X 250(B )mm size made up of 2mm thick CRCA Sheet , powder coated, consists of Timer switch -2 No's , 63A FP MCB - 2Nos, 63A FP isolator - 2Nos, 32A 3P Contactor - 2 No's, A/M Toggle switch-1No Indication lamps- 2 No's including internal wiring and accessories

Fabrication, supply of Lamp standard post with single arm/Double arm for light fitting as per enclosed drawing and specifications

Erection, testing and commissioning of Lamp standard post with single arm/Double arm for light fitting as per enclosed drawing and specifications

Fixing of Street light fitting in exisiting LS Post / Wall / Structure ( Only Street light fittings will be supplied by Railways ).

Removal of existing Lamp standard post including cost of removal, loading, transport and stocking at Railway store madurai.

Painting of LS post of 5 meter height, two coat of Aluminium Paint .

SWC-Provisions for FOB at SMDM and SDNR Stations

Supply and fixing of cable route indicator, cast iron plate type

Excavation of trench in all kinds of soil including refilling as per specification

Laying of HDPE pipes

Drawing of LTUG cables in the existing HDPE pipe laid in the excavated cable trench.

Laying of LTUG cables in the excavated cable trench / on builiding wall/ sheds/ shelters etc including termination.

Clamping of LTUG Cable on the wall/structure with painted MS clamps of suitable size with fixing hardwares.( Only cable will be supplied by Railways)

Supply and laying of 6 SWG GI wire

Supply and fixing of PVC wiring conduit,rigid,25mm dia,Ivory Colour, confirming to IS:9537/P3/1983 or latest with wall thickness not less than 2.0mm with accessories on wall surface and clamped at regular interval not exceeding 500 mm as directed by senior Enigneer in charge at site.

Supply and wiring including termination by 3 No's of 2.5 sq.mm PVC insulated flexible 9 copper cables confirming IS No. 694,1100V grade through the existing PVC pipe already laid.(1 No of multistrand cable for Phase +1 No of multistrand cable for Neutal +1 No of single core cable for earth shall be taken as 1m for measurement purpose).

Supply, erection, testing and commissioning of SMC box of size 150X150X100mm with 1 No of 6A Strip connector 3 Way, 1 No of 16A Porcelain Fuse carrier and 1 no of 6A three plate Ceiling Rose, including locking arrangements and fixing for wiring to fittings in the shelters.

Fixing, testing and commissioning of LED fittings with lamp in the platform shelter / FOB etc with suitable clamp including wiring from ceiling rose to fittings.

Supply, erection, testing and commissioning of Timer switch lighting control panel 12 500(L)X600(H)X 250(B )mm size made up of 2mm thick CRCA Sheet , powder coated, consists of Timer switch -2 No's , 63A FP MCB - 2Nos, 63A FP isolator - 2Nos, 32A 3P Contactor - 2 No's, A/M Toggle switch-1No Indication lamps- 2 No's including internal wiring and accessories