LTG/05/APAS/WD-15/BR-II/ Z-I/25-26

S/F projected lamp bracket of G.I. pipe (I.T.C.) (Class-C of 40 mrn bore dia and 1.5 m) length with tie rod and "S" type ornamental scroll to be fitted at a point 600 mm from the top of the pole by means of clamps, bolts, nuts ete. as required.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts

S/F of special head type M S loop box (3 mm thick) with connecting bar and other accessories fixed on the top the pole as required and as per direction of Engineer-In-Charge. For 3 phase connection.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Above 9.0 mtr. long pole.(iii)2nd coat of synthetic enamel paint over the 1st coat

Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe, Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)h) 410 SP - 24 ; 8.5 Mtr., 158.00 Kg.

Erection of Galv. (HOT Dip) Cross arms/ `D... Iron Clamp7).Supplying & Erection of Galv. `D... iron complete with suitable pole clamp 75mmx88mm porcelain shackle insulator & 15 mm dia Galv. bolts & nuts. incl. painting

S/F fabricating, welding, fixing G.I. junction and 1.5 M long single arm projected bracket made of 50mm dia G.I. (ISI medium) with 2 nos. thro... bolts & nuts of 175 mm (7") long 15.6 mm (5/8") dia including M.S. pole cap at the top of junction with sets screw etc. complete as per direction of Dep...t

SUPPLY & DELIVERY OF SINTEX2 (BOTTOM SIDE) AND 2 (TOP SIDE) FRP WHITER WATERPROOF TYPE LOOPING CABLE BOX SIZE 300X300X125 MM DEEP, 4MM THICK HAVING INSULATION RESISTANCE GREATER THAN 200 M-OHM,IP66, COMPRISING OF ONE NUMBER SPMCB (6-32A),4 NOS TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE AS PER RATE OBTAING FROM GEM PORTAL

S&D OF 40 WATT LED OUTDOOR STREET LIGHT FITTINGS

S&D OF 200 WATT LED OUTDOOR STREET LIGHT FITTINGS

S&D OF 200 WATT LED OUTDOOR FLOOD LIGHT FITTINGS

Sub Total