PROVN OF TILING AND REPAIR OF JOINERY OF GOVT MD ACCN (P 132, P 133, P 135 AND P 129) AT FCSR AND PROVN OF ONE ROOM ALONGWITH ATTACHED BATH AND TOILET AT HQ RTG ZONE INCL ADDITION/ ALTERATION AND SPL REP OF BLDG. P 108/1 PINE WALK UNDER GE SHILLONG.

Amount

Dismantling floor, hearth, wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed.

Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar as directed by Engr-in-charge.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing debris from site etc complete all as specified and as directed.

Demolition of brick or solid concrete block walling built in cement mortar etc complete all as specified and directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Removing of excavated surplus soil to a distance exc 500 m but n. exc 1.5 km and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for earth filling under floors, spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and as directed. Note:- Earth obtained from excavation after cleaning shall be reused in this item.

M&L for 18/19 mm thk WPC (wood Plastic composite) board of grade 1 quality exterior grade complete all as specified and as directed

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing, white lamination, fixed with screws to timber frame work, complete, all as specified and directed.

M&L for 12 mm thk for block board grade 1 quality exterior grade decorative face with veneers on one faces complete all as specified and as directed

M&L for decoratives PVC laminates, type I or surface finish colour and pattern as approved, of thickness 1.20 mm, complete, all as specified and as directed by Engr-in-charge.

M&L for stainless steel basket of size 480X510X200 mm for cutlery and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel basket of size 430X500X200 mm for cutlery and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel basket of size 480x510x100mm for cup and saucer and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel basket of size 430X500X100 mm for cutlery and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel organisor pull out of size 150x510x560 mm and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel plain basket of size 430X510X150 mm and other accessories complete all as specified and directed by Engr-in-charge.

M&L for stainless steel dustbin holder of dia 300 mm complete all as specified and directed by Engr-in-charge.

M&L for stainless steel side hanger of length 350 mm complete all as specified and directed by Engr-in-charge.

S&F for auto close concealed hinge of stainless steel of size 100 mm complete all as specified and as directed by Engr-in-charge.

S&F Brass handle of size 250mm with screws complete all as specified and as directed.

S&F Brass handle of size 150mm with screws complete all as specified and as directed.

S&F drawer channel (soft close) of length 500 mm complete all as specified and as directed by Engr-in-charge.

S&F edge beading of WPC board fixed with nails and adhesives complete all as specified and as directed by Engr-in-charge.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.

M&L for Precast cement concrete block masonry with solid block PCC, type C1 (1:3:6, using 20mm graded stone aggregate) exc 10 Cm in width and setting in cement sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Precast cement concrete block masonry with solid block PCC, type C1 (1:3:6, using 20mm graded stone aggregate) nexc. 10 Cm in width and setting in cement sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in subbase flooring, complete all as specified and directed.

M&L 100 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in subbase flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L 40 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement etc, complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for dark shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for dark shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

M&L Non-Skid ceramic white tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

M&L coloured glazed ceramic tiles 300 x 450 x 7 / 300 x 600 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic white tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic white tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

M&L for Non skid ceramic white tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as skirting/ dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to laid over and include a backing coat of 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L 18-20 mm thick granite (of any type) work (table rubbed and polished) in countertop basin including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using granite dust with admixture of pigment to match with shade of granite complete, including dismantling of existing slab, all as specified and directed.

M&L 18-20 mm thick granite (of any type) work (table rubbed and polished) in countertop basin including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using granite dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Labour only for chamfer, splays or arris in facework of granite not exc 15mm wide complete all as spefied & directed

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked, complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 5 mm dia and over and upto 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer in Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer and fitting of same manufacture of approved profile, shape and colour, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer and fitting of same manufacture of approved profile, shape and colour, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe -290 (Gde E - 165) Quality - A and complete all as specified and directed.

S&F mild steel Framed work as in grills/guard bars etc with ends of bar shouldered/inserted in to wooden frames complete all as specified and directed by Engineer-in-Charge.

S&F structural steel work in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.

S&F iron angle for areal mast, water tank staging and the like incl caps, bases splices etc., built up from two or more angles with plates including Gusset plates etc., of Gde Fe- 290(Gde E- 165), welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated, complete all as specified and directed. Note: The Bid Price should all include above.

M&L for Synthetic enamel paint two coats over a coat of red oxide primer on new or previously untreated steel surfaces exc.10 Cm width or girth including necessary preparation of steel surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for Synthetic enamel paint two coats over a coat of red oxide primer on new or previously untreated steel surfaces nexc.10 Cm width or girth including necessary preparation of steel surfaces etc complete all as specified and directed by Engineer-in-Charge.

S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

S&F powder coated (minimum powder coating 50micron) anodised aluminium frame for doors, windows, ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated (minimum powder coating 50micron) anodised aluminium door shutters, side hung/ sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. including aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 no), suitable handle(2 no) complete all as specified and upto the entire satisfaction of Engineer in charge. Note: Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted.

S&F powder coated (minimum powder coating 50micron) anodised aluminium window and ventilator shutters, side hung/ sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. including aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 no), suitable handle(1 no) complete all as specified and upto the entire satisfaction of Engineer in charge. Note: Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted.

M&L 12 mm thk toughened sheet clear glass incl edges bevelled /rounded incl grinding / cutting complete with all fittings/ washers/ handlesand bolts complete all as specified and directed by Engr-in-charge.

S&F 8.00mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed

S&F 6.30mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed

S&F 4.80mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed.

S&F 4.80mm thick frosted sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc., complete all as specified and directed.

S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Aluminium anodised, long barrel tower bolts with cast or sheet barrel and rooled or cast bolt, of extruded section, 150 mm length, complete all as specified and as directed.

S&F Aluminium anodised, long barrel tower bolts with cast or sheet barrel and rooled or cast bolt, of extruded section, 100 mm length, complete all as specified and as directed.

S&F 150 mm extruded aluminium anodised cast type handles, fabricated type, ISI mark etc., complete all as specified and as directed.

S&F 100 mm extruded aluminium anodised cast type handles, fabricated type, ISI mark etc., complete all as specified and as directed.

S&F 100mm size mild steel Butt hinges, medium weight, cold rolled, ISI Marked complete all as specified and directed.

S&F vitreous china EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS hinge device, PVC flush bend pipe incl flushing cistern 10 Litres capacity, low level valve less, symphonic action type, white with inlet, ball valve, float and handle including 32mm dia PVC flush pipe, a pair of cast iron brackets duly painted/ erecting stand, ISI mark, including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and directed.

S&F in repairs vitreous china EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS hinge device, PVC flush bend pipe incl flushing cistern 10 Litres capacity, low level valve less, symphonic action type, white with inlet, ball valve, float and handle including 32mm dia PVC flush pipe, a pair of cast iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern and connected items of any description, complete all as specified and directed.

S&F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and directed by Engr-in-charge. Make: Jaguar Cat Part No LYS-WHT-38851PSM or equivalent in make cera/ parryware/ Hindware/ Prayag.

S&F table top oval shape vitreous china wash hand basin, size 550x400 mm including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, ISI mark, complete, all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge. Make:- Prayag cat Part no. 4645 IRIS or equivalent make of Cera(First Quality)/ Hindware / Parryware

S&F in repairs vitreous china clay table top Wash Hand Basin of make Jaquar Cat Part ARS-WHT-39601 of size 635x430x190mm including waste coupling Cat Part ALD-727 or equivalent in Hindware/ Cera/ Parryware, complete all as specified and as directed by Engr-in-charge.

S&F CP overhead shower dia 100mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Jaquar Cat part No. OHS- 1989 with CP shower arm dia 20mm & 450mm long round shape without bend for wall mounted showers with flange Jaquar Cat Part No. SHA-49483 or equivalent in Prayag/ Hindware/ Parryware, complete all as specified and as directed by Engr-in-charge.

S&F CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag.

S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag.

S&F CP Hand shower 24x24 mm square shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5m long with nuts complete all as specified and as directed. Make- Jaquar Cat Part No HSH-.35537 for hand shower and Jaquar Cat Part No-SHA-571 for flexible tube or equivalent model from make Parryware /prayag/Cera

S&F shower panel made of black tempered glass body with 2 ABS body massage jet and over head shower with shower arm incl hand shower with flexible hose and brass spout and galss shelf installed as per manufacturer's instruction, complete, all as specified and directed. Make: Jaquar Cat Part No JPL-BLK-GO842JAX or equivalent in Parryware/Prayag/Cera

S&F in repair CP overhead shower dia square 150x150mm shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Jaquar cat part No:OHS-CHR-1619 with CP shower arm 25x25 mm square shape & 450mm long for wall mounted showers with flange Jaquar Cat Part No. SHA-455L400 or equivalent in Prayag/ Hindware/ Parryware, complete all as specified and as directed by Engr-in-charge.

S&F in repair fancy type single lever tall boy mixer chromoium plated 155mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and as directed by Engineer-in-Charge. Make Jaguar Cat Part No-KUP-35005BPM equivalent make of Prayag/ Cera/Parryware/ Hindware.

S&F in repairs lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges complete all as specified and as directed by Engr-in-charge. Make: Jaquar cat part No. LYR-38165 or equivalent in Parryware/ Cera/ Prayag

S&F fancy type CP single lever basin mixer without popup waste with 450mm long braided hoses, fixed in position, complete all as specified and as directed by Engr-in-charge. Make: Jaquar Cat Part KUP-35051BPM or equivalent in Prayag/ Hindware/ Parryware,

S&F in repair 15 mm bore brass CP center hole basin mixer for mixing hot and cold water, fancy type etc., screwed for iron pipe complete all as specified and directed. Make : Prayag cat part no. 7650 or equivalent modal of Marc/ Hindware / Jaquar.

S&F Brass CP 2-in-1 bibcock with flange of make Jaquar Cat Part ORP-10041PM or equivalent in Prayag/ Hindware/ Parryware, complete all as specified and as directed by Engr-in-charge.

S&F in repairs brass CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Jaguar/ Prayag/ Hindware.

S&F Soap dish holder of make Prayag Cat Part BA-05 equivalent in Prayag/ Hindware/ Parryware, complete all as specified and as directed by Engr-in-charge.

S&F in repairs Soap dish holder complete all as specified and as directed by Engr-in-charge. Make: Jaguar Cat Part No. AKP-35731P or equivalent in Marc/ Parryware/ Prayag

S&F stainless steel Towel ring square shape with round flange with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No AKP 35721P or equivalent model from make Hindware /Parryware/Prayag/Cera.

S&F in repairs Towel ring square shape stainless steel complete all as specified and directed by Engr-in-charge. Make: Jaguar Cat Part No. AKP-35721P or equivalent in Marc/ Parryware/ Prayag

S&F in repair Tubular towel rail, brass chromium plated, 20mm dia, 60cm long between flanges etc., complete all as specified and as directed. Make: Prayag / Hindware / Marc.

S&F in repairs Towel rack 600mm long with lower hangers, stainless steel complete all as specified and directed by Engr-in-charge. Make: Jaguar Cat Part No. AKP-35781PS or equivalent in Marc/ Parryware/Prayag

S&F Sheet glass corner shelf assembly with ABC bracket complete all as specified and as directed. Make- Jaquar Cat Part No CAN-CHR-1173 or equivalent model from make Parryware / Hindware

S&F in repair Sheet glass corner shelf assembly with ABC bracket complete all as specified and as directed. Make Jaguar Cat Part No:CAN-1173 or equivalent Cera/ Hindware/ Prayag

S&F in repairs 15 mm bore ABS Body Health Faucet with Rubbit cleaning system, 1.25 meter long easy flex tube in chrome finish & wall hook, fixed in position complete all as specified and as directed. Make: Hindware Cat No. F 160027 or Jaguar Cat Part No. ALD-565 or equivalent series in KOHLER/ Roca

S&F Toilet roll holder with stainless steel complete all as specified and directed. Make: Cera/Hindware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&F brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections, packing union and cap complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections, packing union and cap complete all as specified and as directed by Engineer-in-Charge.

S&F CP angular Stop cock, 15 mm bore, fancy type, capstan heads, brass chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayag/ Cera/ Parryware

S&F in repairs brass CP angular Stop cock, 15 mm bore, fancy type, capstan heads, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayag Cat part No.8010 or equivalent model from make Cera/Jaguar/Parryware

S&F CP Bib tap 15 mm bore, cast copper alloy, fancy type, with flange chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make: - Prayag/ Cera/ Parryware

S&F 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches/floors complete all as specified and directed. Make:- Prince / supreme.

S&F 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches/floors complete all as specified and directed. Make:- Prince / supreme.

S&F 110mm bore PVC (SWR) bends/ door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. Make:- Prince / supreme.

S&F 75mm bore PVC (SWR) bends/ door bend of any radius with cement solvent, cement joints, complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

S&F PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends to stays to wall or roof complete all as specified and as directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed. Make: Prayag/Anjali/Blue star

S&F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors as instructed complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors as instructed complete all as specified and directed.

M&L for cutting chases not exceeding 10 cm girth, pinning in concrete block work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, for concealed water tubing or concealed conduit wiring etc., complete all as specified and as directed.

S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks, three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position including PTMT high pressure ball valves 20mm dia with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe approx length 1.5 mtr, 25 mm dia wash out pipe with plug at one end, complete all as specified and directed.

S&F 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F curtain rail 20 mm dia, mild steel chromium plated with fixing brackets, stops, and rollers etc., complete all as specified and as directed.

S&F in repairs curtain rail 20 mm dia, mild steel chromium plated with fixing brackets, stops, and rollers etc., complete all as specified and as directed.

S&F double rod brackets, stops, and rollers etc., wooden finish for 20mm dia curtain rail, complete all as specified and as directed.

S&F in repairs double rod brackets, stops, and rollers etc., wooden finish for 20mm dia curtain rail, complete all as specified and as directed.

M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats over one coat of wall primer, over and including 1 mm thick wall care putty, complete all as specified and as directed by Engineer-in-Charge.

M&L for preperation of new or previously untreated surface, applying two or more coats of 100% premium acrylic emulsion paint having VOC (volatile organic compound) less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm on new or previously untreated surface over 1mm thick wall care putty, complete, all as specified and as directed by Engr-in-charge.

M&L for complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying two coats of oil bound distemper over one coat of wall primer over and including 1mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately. PVC Conduit confirming to IS 9537 part I & III. Note (All chases will be cut by chase cutter only)

Description all as per serial item No 157 here in before but for socket outlet point 5 Amp on same board.

Description all as per serial item No 157 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 157 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona , Plaza, Anchor, Vinay

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona, Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. Make: Cona , Plaza, Anchor .

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, poly carbonate, complete all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S&F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S&F Exhaust fan 230 volts, 300mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Phillips/ havells.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete, all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete, all as specified and directed. Make: Havells Cat part No - DHMCCDPF006-040 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB, single pole, C Series, 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one complete, all as specified and directed. Make: L&T/ Schneider/ Indoasian

Supply and fix and testing of storage type, electrically driven, ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating, AC, single phase including necessary fixing arrangements, electric and water connection complete all as specified and as directed. Make: Havells Cat part no. GHWAMGTWH025 or equivalent make in Racold / Bajaj/ LG.

S&F heat resistant PVC connection pipe for hot and cold water, 15mm size, 450 mm long with PTMT nuts, complete, all as specified and as directed. Make: Parayag/ Polytuf/ Havells

Supply and laying GI tubing medium grade, for geyser connection, 15mm bore with all GI fittings, fixed to walls and ceiling or laid in floor for cable crossing, complete, all as specified and as directed.

Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning for laying/ cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc., LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 2 core , confirming to IS specifications as specified and directed by Engr-in-charge.

M&L for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead incuding medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 6.0 sqmm cable, one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/ Finolex/ Kalinga.

M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 4.0 sqmm cable, one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete, all as specified and directed. .

Supply , laying and connection in trenches GI tubing , medium grade, 25 mm dia including fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as directed by Engr in Charge. Note - excavation will be measured and paid seperately under relevant item

S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 25 mm bore of pipe gate valve complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete including taking down old unserviceable one, all as shown in Electrical Plate No 3 of SSR part -I.

R K CONSTRUCTION