Fabrication and Erection work

Amount

FABRICATION AND ERECTION

Dismantling of MS/GI/SS pipe line size--1/2" to 12" Erection of MS/GI/SS pipe line size--1/2" to 12"

Dismantling of MS/SS pipe line size--14" to 50" Fabrication of MS/SS pipe line size ---14" to 50" 3mm/6mm/8mm/10mm/12mm Erection of faricated MS/SS pipe line size--14" to 50"

Dismantling of C I pipe line upto 12" Erection of C I pipe line upto 12"

Dismentalling of MS/SS Nipple upto 12"dia and upto 1 meter long Fabrication of MS/SS Nipple upto 12"dia and upto 1 meter long Erection of MS/SS Nipple Nipple upto 12"dia and upto 1 meter long

Dismentalling of faricated MS/GI/SS Nipple size--14"to 50"and upto 1 meter long Fabrication of MS/GI/SS Nipple size ---14" to 50" and upto 1 meter long Erection of faricated MS/GI/SS Nipple size--14' to 50" and upto 1 meter long

Dismentalling of MS/SS Bend upto 12"dia Fabrication of MS/S Bend upto 12"dia Erection of MS/SS Bend upto 12"dia

Dismentalling of MS/GI/SS Bend size--14"to 50" Fabrication of MS/GI/SS Bend size ---14" to 50" Erection of faricated MS/GI/SS Bend size--14' to 50"

Dismentalling of MS/SS Cone size--upto 100" Fabrication of MS/SS Cone size--upto 100" Erection of MS/SS Cone size--upto 100"

Dismentalling of C I Bend upto 12" Erection of C I Bend upto 12"

Dismantling of C I Tee upto 12" Erection of C I Tee upto 12"

Dismantling of C I Cross upto 12" Erection of C I Cross upto 12"

Dismantling of MS/SS Tee size--upto 100" Fabrication of MS/SS Tee size--upto 100" Erection of MS/SS Tee size--upto 100"

Dismantling of MS/SS Cross size--upto 100" Fabrication of MS/SS Cross size--upto 100" Erection of MS/SS Cross size--upto 100"

Dismantling of railing of pipe. -Fabrication of railing pipe -Erection of railing pipe

Fixing of G.I wire weaved fencing around cold water reservoir

Dismantling and washing of old flange

Fabrication and Drilling of flange from MS plate

Replacement of Square bar/Rail 40mm/50mm

Replacement of Runner Flat of Cane Carrier/Secondary cane carrier/IRC/Bagasse Elevator/MBC/RBC 65mm/75mm

Replacement of Angle of Cane Carrier/Secondary cane carrier/IRC/Bagasse Elevator/MBC/RBC 65mm/75mm/90mm

Replacement of Side plate of Cane Carrier/Secondary cane carrier/IRC/Bagasse Elevator / MBC / RBC Chains 6mm/8mm

Dis.Fab. and Erection of hood of Cane Leveller/Cane Chopper with supporting angle 10mm/12mm

Dis.Fab. and Erection of both side plate of hood of Cane Leveller/Cane Chopper with supporting angle 10mm/12mm

Dis.Fab. and Erection of both side plate ( MS/SS 10mm/12mm) of Fibrizer with supporting angle

Dis.Fab. and Erection of front side plate ( MS/SS 10mm/12mm) of Fibrizer with supporting angle

Dis. Fab. and Erection of round Trough of Secondary cane Carrier/IRC/Bgasse Elevator/MBC/RBC 8mm/10mm/12mm plate

Dis. Fab. and Erection of base plate( MS/SS-- 8mm/10mm/12mm) of Secondary cane Carrier/IRC/Bagasse Elevator/MBC/RBC

Fabrication of Rakes of Secondary cane Carrier / IRC with attachment from MS pipe Size-- 4" and 1"

Fabrication of Rakes of Bagasse Elevator/MBC with attachment from MS pipe Size-- 3" and 1"

Dismentalling of MS/SS Round/Square tank Fabrication of MS/SS Round/Square tank Erection of MS/SS Round/Square tank

Dismentalling Bagacilo Screen frame Fabrication Bagacilo Screen frame Erectiontion Bagacilo Screen frame

Dismentalling Bagacilo Railing frame Fabrication Bagacilo Railing frame Erectiontion Bagacilo Railing frame

Dismentalling of CI/GM Sluice/Angle/Butterfly Valve Size upto---16" Erection of CI/GM Sluice/Angle/Butterfly Valve Size upto---16"

Dismentalling of Pan Discharge Butterfly valve Erection of Pan Discharge Butterfly valve

Dismentalling of SS/Brass tube of Evaporators (S.K,V.C,Quads) Fitting of SS/Brass tube of Evaporators (S.K,V.C,Quads)

Dismentalling of SS/Brass tube of Pans Fitting of SS/Brass tube of Pans

Dismentalling of SS/Brass tube of Juice Heaters Fitting of SS/Brass tube of Juice Heaters

MS Straight/Right angle valve Size-300mm,350mm,400mm,450mm,600mm,700mm,900mm and 1000mm Dis. Erection

Hydaulic Testing of Evaporators (S.K,V.C,Quads) Hydaulic Testing of Pans Hydaulic Testing of Juice Heaters

MS Blind Size----1" to 50" Dis. Fab. Erection

Dismentalling of GI/Colored coated sheet Fitting of GI/Colored coated sheet

Dismentalling of ACC sheet Fitting of ACC sheet

Dismentalling of MS/SS Reducer size--upto 100" Fabrication of MS/SS Reducer size--upto 100" Erection of MS/SS Reducer size--upto 100"

Dismentalling of staircasing Fabrication of staircasing Erection of Staircasing

Dismentalling of Monkey Ladder Fabrication of Monkey Ladder Erection of Monkey Ladder

Dismentalling of fabricated frame of pump & motor Fabrication of frame of pump & motor Erection of frame of pump & motor

Dismentalling of juice/water/syrup/molasses pump Erection of juice/water/syrup/molasses pump

Dismentalling of Injection/Spray/Massicuite/Magma pump Erection of Injection/Spray/Massicuite/Magma pump

Dismentalling of motor upto 50HP Erection of motor up to 50HP

Dismentalling of motor 55 HP to 250 HP Erection of motor 55 HP to 250 HP

Dismentalling of bewel geared discharge valve and fitting of butterfly valve with modification of nipple & flange

Strengthening of building structure column binder

Replacement of VLJH Dismantling & erection of vapour line juice heater.All dismantled connections To be connected. Levelling &alignment to be made.

Replacement of Shell of Pan 60 Ton Dismantling Fabrication & erection of pan shell.All dismantled connections to be connected.

Replacement of Save All of pan Dismantling & erection of save all of pan . All dismantled connections to be connected.

Replacement of stirrer shaft of Air Cooled Crystalizer--A, B & C Dismantling & erection of stirrer shaft of Air Cooled Crystalizer--A, B & C . All dismantled connections to be connected. Dismantling & fitting of drive gear arrangement.

Replacement of Top Cone Of pan Dismantling & erection of top cone of pan . All dismantled connections to be connected.

Replacement of Bottom Cone Of pan Dismantling & erection of bottom cone of pan . All dismantled connections to be connected.

Replacement of cooling coils of vertical crystallizer as per drg. Dismantling & erection of cooling coils of vertical crystallizer . All dismantled connections to be connected.

Shifting of 50 Tons capacity pan from old mill to new mill Dismantling & erection of 50 Tons capacity pan . All dismantled connections to be connected

Shifting of vacuum crystallizer-A in place of vaccum crystallizer-C at the same floor Dismantling & erection of vacuum crystallizer-A in place of vaccum crystallizer-C . All dismantled connections to be connected.

Shifting of 50 ton air cooled crystallizer from old plant to new plant Dismantling & erection of 50 ton air cooled crystallizer . All dismantled connections to be connected and drive arrangement

Replacement of center shaft of juice clarifier Dismantling , erection and alignment of center shaft of juice clarifier . All dismantled connections to be connected.

Replacement of mud boot Dismantling,fabrication & erection of mud boot. All dismantled connections to be connected.

Replacement of compartment bottom plate of Juice clarifier Dismantling fabrication & Erection of compartment plate

Dismantling of Massecuite gutter Fabrication of Massecuite gutter Erection of Massecuite gutter

Dismantling , fabrication & erection of dorr compartment shell with MS plate channel angles.The erection work for this will also include all connections which are dismantled during dismantling.

Dismantling , fabrication & erection of dorr compartment/chamber roof with MS plate channel angles supports.The erection work for this job will also include all connections which are dismantled during dismantling.

Dismantling of top/ bottom cover of juice heater Erection of top & bottom cover

Dismantling & erection of square channel for rubber strip fitting of juice heaters

Dismantling , fabrication and erection of compartment box of juice heater

Dismantling of Horizontal sugar melter and to be shifted as per the directions of CE/CC

Shifting & Erection of vertical sugar melter for reprocessing of moist sugar Dismantling & erection of old vertical sugar melter for reprocessing of moist sugar. All dismantled connections to be connected with drive arrangement

Cantilever provided at the top of O.C.Filter to lift the drum at the height appx 10.0 meter from ground floor.

Dismantling of old mud mixer scroll Fabrication and Erection of new Mud Mixer Scroll

Modification of Mud mixer Trough To increase the length of mud mixer trough by approx. 1 mtr.

Replacement of Bagacilo Line Dismantling, Fabrication and Erection of Bagacilo line

Dismantling, Fabrication and Erection of Bagacilo Cyclone

MS New Sulphur Furnace (complete) Fabrication & erection of sulphur furnace as per drg./as per instructions of CE/CC

Fabrication & erection of MS shoot for DSM screen

Fabrication , erection of corrugated 6./8 inch wide plate for equal water distributing at ETP

Dismantle, fabrication and erection of sperger M.S. pipe having length 500mm app, dia 14.0 inch dia

Dismantling, Fabrication and Erection of worn out stirrer arm of vertical crystallizers drive.

Replacement of distance piece of vapour pipe upto 1.5 mtr

Sulphur furnace (Extra work ) Scope of work a. Top baffle plate to be dismantle and erected 250 mm away from existing site. b. Dismantling of existing worn out baffle plate , fabricate and erect at existing site

Gate frame of magma mixture Scope of work a. Fabrication of frame along with MS channel. b. Drill to be made in both MS channel. c. Erection of frame at site

Fabrication and erection of sulphur furnace heating element coil of sulphur furnace melter. a- Fabrication of nipples and erection at sulphur melter systems b- Fabrication of nipples and erection of sulphur melter receiver

Shifting of sugar hopper from old plant to new plant Dismantling & erection of sugar hopper.

Erection & commissioning of Hopper Tray with decking plate, connection arrangement of connecting rod and angle klits for wooden strips fitting approx. length 10 mtr.

Dismantling, shifting and erection of sugar elevator from old plant to new plant complete with structure

Dismantling, shifting and erection of sugar Grader from old plant to new plant complete with structure

Planetary gear box Erection & commissioning of planetary gear box at vertical crystallizer Any additional job to complete the erection work of planetary gear box to be carried out by the contractor

Fabrication & erection of pneumatic shoot of Grader

Erection of pneumatic clamps of Grader

Repair of stirrer shaft of vacuum crystallizer Dismantling & erection of stirrer shaft of vacuum crystallizer after repair

Strengthening of stirrer shaft of air cooled crystallizer • Dismantling & erection of stirrer shaft of air cooled crystallizer after repair.

Dismantling of platform -Fabrication of platform -Erection of platform

Fabrication and Erection of cane unloader bridge platform

Dis,feb,& errection of umbrella of pan along with its supports.

Dismantling of J-pipe of pans -Fabrication of J-pipe of pans -Erection of J-pipe of pans

Dismantling of vapour/exhaust pipe size-700mm/900mm/1000mm/1100mm -Fabrication of vapour/exhaust pipe from 8mm/10mm thick plate -Erection of vapour/exhaust pipe

Dismantling of structure as per the instruction of CE -Fabrication of structure -Erection of structure

Patch work of different equipments

To straight the old damaged vapour pipe and round tank for platform.

Dismantling of Steam coil of molasses storage tank at pan station size 1” to 2”. -Fabrication of Steam coil of molasses storage tank at pan station size 1” to 2”. -Erection of Steam coil of molasses storage tank at pan station size 1” to 2”.

Dis, fab, & errection of juice coil of juice clarifier size 4”,5” & 6” alongwith its nipple

Dis. Fab & Erection of Wt. Juice pump strainer

Dismantling, Fabrication and Erection of pan SAVE-ALL top plate

Planetary gear box Erection of planetary gear box of horizontal crystallizer

Replacement of old gate valve with new gate valve of crystallizers

Dismantling of double beat valve and erection of same of juice heater at existing site.

Dismantling of old Transient heater and Erection of new Transient heater along with all connections and valve.

Fabrication & Erection of Factory structure Complete window (frame & grills)

Modification, & Erection of mill house Rotary screen inlet juice Tank &platform

Fabrication and erection of excess bagasse carrier to RBC as per the dirction of CE scope of work (A) Fabrication and erection of column and structure for Belt conveyor , Along with drive system and discharge chute to RBC Column and steel structure

Fabrication and erection of cooling tower structure and shed

Strengthening of pans/vacuum crystallizer shell with angle and channels in round shape with MS angle 75mmx75mm and dia 4mtr ( Two rounds )

Strengthening of evaporator shell with angle and channels in round shape with MS angle 75mmx75mm and dia 2.80mtr ( Two rounds )

Dismantling , fabrication & erection of juice feed boxes of juice heater double beat valve.The erection work for this job will also include all connections which are dismantled during dismantling.

Dismantling , fabrication & erection of melter of sulphur furnace as per existing design. This work include dismantling and erection of all connections, man hole, flanges etc.

Dismantling , fabrication & erection of scrubber of sulphur furnace as per existing design. This work include dismantling and erection of all connections, man hole, flanges etc.

Replacement of sealing ring of dorr mud boot

Dismantling , fabrication & erection of worn out heavy / light vacuum tank of RVF including all connections.

Dismantling , fabrication & erection of MS barometric condenser of RVF. This job will include all connections which are dismantled during dismantling.

Dismantling , fabrication & erection of bottom trough of RVF

Dismantling , fabrication & erection of down take of pan from 10/12 plate

Dismantling , fabrication & erection distributor of pans

Replacement of feed box of pans including all connections

Fitting of pad, ribbes on shaft of air cooled crystlizer / vaccum crystlizer and fitting of angle and ribben

Mohd Wahid Industries

TAB ENGINEERING WORKS