PROVN OF TOILETS FOR CHILDREN SCHOOL AT PATHANKOT UNDER GE(WEST)PATHANKOT

Amount

Sch 'A' Part-I B/R work:- Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft & loose soil complete all as specified and directed by Engr-in-Charge.

M&L for Treating the bottom and sides of excavation, top surface of filled earth and soil under plinth protection @5 litres of emulsion per square metre of surface area with ANTI-TERMITE TREATMENT complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete Type D-2 1:4:8 (using 40 mm graded graded crushed stone aggregate) in foundations, filling and mass-concrete and sub base of floor complete all as specified. and directed by Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in chajja complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix M-25, type B-1 (using 20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edges

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

M&L for Fly ash brick work, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work, straight or curved on plan to any radius in half brickthick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregate) to horizontal or vertical surfaces including mixing with integral water proofing compound (as per manufacturer instruction) including necessary formwork complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.

M&L for rendring 05mm thick in CM 1:3 on concrete surfaces/chajja/ceiling, etc finished even and smooth without using extra cement complete all as specified.

Supply only integral waterproofing compound.

S&F factory made Pressed steel frame of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete and including back filling of hollow portion of frame, fixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate. Pressed steel frames shall be painted with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as spd and directed

S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 sheet 1/2 complete all as specified and directed.

S&F factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified .

S&F 100mm long butt hinges, heavy weight, cold rolled mild steel

S&F 75mm long butt hinges, heavy weight, cold rolled mild steel

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

M&L for mild steel work (angle iron or flat iron) as in hold fasts, wall ties, clamps, ventilator pipe, rain water pipe,band, straps, hooks for hanging fans, manhole covers, MS rungs and similar small articles conforming to Fe-310-O or Fe-410-O all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint exterior paint with silicone additives of required [email protected] liter/10 Sqm area over and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm (weather proof/weather coat) complete all as specified and directed by Engr-in-Charge .

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for hardcore of Broken stone or boulders n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Surface excavation not exc 30 cm depth and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed

M&L for 100mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base Finishing surfaces of concrete to be even and rough complete all as specified and as directed.

M&L for 80mm thick M-40 Grade, coloured rubber moulded glossy finish Machine pressed precast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment including 25mm thick sand cushioning bed complete all as secified and directed. Note:-Shape, size and colour of interlocking paver block and laying pattern shall be approved by GE.

Providing and laying at or near ground level factory made kerb stone of M-25 grade of size 300mmx150mmx300mm, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as secified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base Finishing surfaces of concrete to be even and rough complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7-8mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4) complete all as specified and as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match including rubbing and polishing complete including 10 mm thick backing layer in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

M&L for preparation of newly concrete surfaces and surface shall be leveled with a layer of 15 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and applying roof treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 kg/sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer's instructions over one coat of approved cold applied bituminous oil based primer (IS-3384) @0.30 litre/sqm complete all as specified and directed

S&F modern finished vitreous china wash basin, table top or table fixed of approved size, flat back, with granite top finished of any colour, pattern or texture, including angle valve, pvc connection, brackets, CP brass waste fitting 32mm dia, PVC waste pipe 750mm long, cutting for pinning in ends of brackets or erecting stand complete all as specified and as directed by Engg-in-charge

S&F vitreous china water closet squatting pan ‘Orrissa pattern” size 580x440mm white with integral foot rests including provision of of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface jointing to PVC/CI bend and flush pipe complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China Urinal, full stall type, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and Union for discharge pipewhite complete all as specified and directed by Engr-in-charge.

S&F vitreous China urinal partition white of Size 310 x 770 mm incl finishing the joints with white cement & fixed complete all as specified and directed by Engr-in-Charge.

S&F brass chromium plated shower roses 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F Vitreous china wash down water closet pan "Pedestal Pattern" white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, complete all as spd & directed complete all as specified and directed by Engr-in charge.

S&F brass CP Health Faucet ABS body with wall hook and 1.25 mtr long CP PVC Flexible Tube Chrome Finish complete all as specified and directed. Make:- Cat part No. F8030103 of CERA or equivalent as mentioned in list of approved make

S&F toilet paper holder vitreous china, box type, as per sample approved and directed by Engr-in-Charge.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified.

S&F 110mm PVC(SWR) WC connector bent type complete all as specified and as directed.

S&F 15 mm dia PVC connection of 600mm long, PTMT nuts.

S&F 15 mm dia PVC connection of 300mm long, PTMT nuts.

S&F Bottle trap of PTMT having minimum water seal of 25mm Bore dia of discharge pipe 32 mm(Minimum weight 32mm-260gms)

S&F Waste coupling of PTMT (half or full threaded) . Bore dia of discharge pipe 32 mm (Minimum weight 32mm?45gms)

S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor including testing complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor including testing complete all as specified and directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm bore CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and with crutch or butterfly handle, screwed down , high pressure for iron pipe complete all as specified and directed by Engr-in-Charge.. Make:-Jaquar/Cera/Prayag

S&F 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' , screwed for iron pipe complete all as specified and directed.

S&F 15mm bore fancy type CP Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F 15mm bore fancy type CP Angle cock/Stop valves long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F brass CP Soap Dish or Soap Holder Dish round/oval shaped for Bathroom with fixing arrangement complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with all fittings all as specified in SSR Part I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of radius 110mm bore with access door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) branch pieces (Tee) with cement joint of radius 110mm bore complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) floor trap 75 mm with grating, setting and jointing with solvent cement complete all as specified and as directed

S&F PVC (SWR) vent cowl 100mm size complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

M&L for 150mm bore Reinforced concrete pipes(ISI marked), class NP3, laid and jointed in cement mortar complete with collars, laid in trenches and tested complete all as specified and directed by Engr-in-Charge.

M&L for concrete bed to drain pipe in PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 150 mm bore pipe, complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as require internal dia of pipe 150mm complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete Type C-2, 1:3:6 (using 40 mm graded graded crushed stone aggregate) in foundations, filling and mass-concrete, complete all as specified. and directed by Engr-in-Charge.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in coping, bed blocks, benching and like including necessary formwork complete all as specified and directed by Engr-in-Charge.

M&L for 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified & directed. (Inner girth only measured)

All as per srl item No. 93 here-in-before but for each 25 mm girth or part thereof over or under 30cm.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in landings, cover slabs (for manholes/drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Sch 'A' Part-II E/M work:- M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories having thickness not less than 1.8 mm including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl item No 96 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amps flush type 240 volts complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface bakelite 65 x 50mm three terminals complete all as specified and directed.

S&F wall mounted LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

S&F bldg security light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing Exhaust fan, havig steel body complete with louvers shutter,Single phase, 230 volts, 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as spd and directed by Engr-in-charge.

S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the disturbed wall surface with cement mortar to match with existing surface complete all as specified and as directed by Engg-in-charge.

S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the disturbed wall surface with cement mortar to match with existing surface complete all as specified and as directed by Engg-in-charge.

S&F MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'B' curve in distribution boards all as specified and directed.

S&F MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of 'B' curve in distribution boards all as specified and directed.

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq. mm 2 core complete all as specified

Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for laying of pipes/cable etc and not exceeding 10 sqm on plan for manholes etc and getting out in any type of soil, complete all as specified. and directed by Engr-in-Charge.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I complete all as specified and as directed by Engr-in-Charge. Note:-Punned thickness will be measured and paid

M&L for brick covering with width equal to length of brick as mechnical protection to cable with well burnt sub class 'B' bricks laid as directed.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for GI tubing light grade 50mm bore for cable protection laid in tranches or in road crossing or fixed to wall/pole including all fittings complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 05 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F 25mm dia bore GI tubes medium grade with all fitting and laid in trences complete including testing complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia bore GI tubes medium grade with all fitting and laid in trences complete including testing complete all as specified and directed by Engr-in-Charge.

M&L for cutting/drilling of 40/50mm GI pipe for connection of 20/25mm GI pipe including all required accessories and earth work if required complete all as specified and as directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm bore complete all as specified and as directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

M/S Raghuvanshi Builders

DABGOTRA BUILDERS

GANDOTRA CONSTRUCTION CO

kay gee construction co

M/S S KUMAR & CO

M/S PREMI CONSTRUCTION CO