Providing renovation works and water supply facilities to the Government Boys hostel, Jeeva Nagar at Kottucherry, Karaikal

Amount

Earthwork in excavation by mechanical means(Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50m- all kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - all work upto plinth level - 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering , finishing and reinforcement -All work upto plinth level 1:2:4 (1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc.upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams,suspended floors , roofs having slope up to15degree landings , balconies , shelves ,chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluding the cost of centering ,shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams ,girders , bressumers and catilevers

Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more

Brick work with common burnt clay F.P.S.(non modular ) bricks of class designation3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes andsizes in -cement mortar 1:6 ( 1 cement : 6coarse sand)

Providing and fixing of 65mm Godrej Navatal lock of 6 levers etc complete

Steel work welded in built up sections framed work , including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - ingratings, frames, guard bar, ladder,railings, brackets,gates and similar works

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc complete - 40mm thick with 20mm nominal size stone aggregate

Providing and fixing on wall face unplasticised rigid PVC rain water pipesconforming to IS: 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Coupler - 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVCrain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee without door -110x110x110mm

Providing and fixing on wall faceunplasticised - PVC moulded fittings /accessories for unplasticised rigid PVCrain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gapfor thermal expansion - bend 87.5 degree - 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gapfor thermal expansion - shoe (plain) -110mm shoe

Providing and fixing unplasticised - PVCpipe clips of approved design to unplasticised- PVC rain water pipes bymeans of 50x50x50mm hard wood plugs ,screwed with M.S. screws of required length, including cutting brickwork andfixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc.,complete - 110mm

12 mm cement plaster of mix 1:6 (1 cement :6 course sand)

White washing with lime to give an even shade - new work (three or more coats)

Raking out joints in lime or cement mortar and preparing the surface for repointing orreplastering , including disposal of rubbish to the dumping ground within 50 metres lead

Flush pointing with cement mortar 1:3 (cement : 3 fine sand) mixed with 2% ofintegral water proofing compound by weight of cement for flat tile bricks on top of mud phaska - with F.P.S. brick tiles

White washing with lime to give an even shade - Old work (two or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete

Painting with synthetic enamel paint ofapproved brand and manufacture of required colour to give an even shade - One or more coats on old work

Finishing walls with water proofing cement paint of required shade - old work (one or more coats applied @2.20 kg/10sqm) over priming coat of primer applied @0.8 litres/ 10 sqm complete including cost of priming coat.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal on unserviceable material within 50 metreslead - in cement mortar

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern overand including 50mm thick compacted bed of coarse sand , filling the joints with coarse sand etc. all complete

Supplying fixing and commisioning of Suguna / Texmo / Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete

Acid cleaning for the existing Mosaic floors , glazed tiles work and removing the stains and decays to give a glassy look etc compelte (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32mm C.P.brass waste of standard pattern ,including painting of fittings and brackets,cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank

Providing and fixing PTMT pillar cock of approved quality and colour - 15 mm nominal bore , 107 mm long, weighing not less than110 gms

Making soak pit 2.5 m diameter 3.0 metredeep with 45 x 45 cm dry brick honey combshaft with bricks and S.W. drain pipe 100mm diametre , 1.8 m long complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5

Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 25mm nominal bore.

Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore /Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site ,lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, UPVC specials such as bends, tees, threaded pieces, couplers,reducer,endcaps etc., complete all as per IS and CPWD specification. - 20mm dia.

Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore /Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site ,lowering to the trenches, laying to propergrade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, end caps etc., complete all as per IS and CPWD specification. - 25mm dia.