REPAIR MAINT OF EXTERNAL ELECTRIFICATION INTERNAL ELECTRIFICATION COOLING APPLIANCES WATER SUPPLY PUMP WITH CONNECTED ITEM AT 41 WEU JANDWAL UNDER AFS PATHANKOT

Amount

Material & Labour Point wiring complete using FRLSH PVC insulated unsheathed, multistranded copper conductor cable, with proper colour coding, drawn through and including PVC conduit/ casing capping with all fitting of suitable size ISI marked, concealed / above surface and including sunken MS box and including new 3 mm thick bakelite sheet for mounting switches, sockets etc, making connections and making good the disturbed surface to match with the existing specifications complete all as specified and as directed by Engr-in-Charge. Note :- (i) Wiring shall be done by using colour code. (ii) Earth wire shall be of green colour.

All as per srl item No1above but with 2.5 sqmm copper conductor cable (multistranded) complete all as specified and directed by Engineer in charge.

Supply & fixing sheet metal enclosure (Factory made) for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way single door with 200 Amps rated busbar complete all as specified and directed by Engineer in charge.

All as per srl item No 03 here in before but 4 way SPN single door with 200 amps rated bus bar complete all as specified and directed by Engineer in charge.

All as per srl item No 03 here in beflore but 4 way TPN 415 volts complete all as specified and directed by Engineer in charge.

Supply only LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer in charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in charge.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in charge.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and directed by Engineer in charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as shown in electrical plate No. 3 of MES schedule 1991 (Part-1) connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engineer in charge.

Receiving/recording complaints lodged by the user/occupants of water Supply nature, rectification of the fault as per the compaint lodged by the user Overhead Water Tank excluding float valve complete repair to the extent by removing pipe connections, removing faults, including providing stores such as tee, unions, sockets, nuts, bolts required at the site to rectify the fault with regard to complaint lodged and re-fixing the fittings and fixtures to their original position as dismantled complete all as directed to the entire satisfaction of Engineer -in- charge .

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed by Engineer in charge.

Material & Labour Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil. complete all as specified and directed by Engineer in charge.

Removing excavated material and depositing where directed n exc 50m and level n exc 1.5m above the starting point complete all as specified and directed by Engineer in charge.

Supply and lay in replacement pipe galvanized, “Medium grade”, including fittings 80 mm (3”) dia complete all as specified and directed by Engineer in charge.

Supply and lay in replacement pipe galvanized, “Medium grade”, including fittings 50 mm (2”) dia complete all as specified and directed by Engineer in charge.

Supply and lay in replacement pipe galvanized, “Medium grade”, including fittings 40 mm (1.5”) dia complete all as specified and directed by Engineer in charge.

Supply and lay in replacement pipe galvanized, “Medium grade”, including fittings 25 mm (1.0”) dia complete all as specified and directed by Engineer in charge.

Supply and lay in replacement pipe galvanized,“Medium grade”, including fittings 20 mm (3/4”) dia complete all as specified and directed by Engineer in charge.

Supply and fix in replacement Sluice Valve Class PN 1.6 for 80 mm dia pipe complete all as specified and directed by Engineer in charge.

Supply and fix in replacement Valve, globe conforming to IS 9338, 50 mm (2”) dia pipe complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40 mm (1.5”) dia complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm (1”) dia complete all as specified and directed by Engineer in charge.

All as per srl item No 24 above here in before but for size 20 mm dia pipe complete all as specified and directed by Engineer in charge.

Material and labour for construction of valve pit including necessary excavation and earth work as required including necessary PCC work, brick work, plastering etc all as specified including fixing of MS sheet 6 mm thick cover and angle iron frame with locking arrangement including two coats of red oxide arrangement including two coats of red oxide primer internal size of pit 600X600X600mm complete all as specified and directed by Engineer in charge.

Supply and fix in replacement Non Return Sluice Valve for 80 mm dia pipe complete all as specified and directed by Engineer in charge.

Supply and fix in replacement Sluice Valve Class PN 1.6 for 100 mm dia pipe complete all as specified and directed by Engineer in charge.

Supply and fix in replacement Sluice Valve Class PN 1.6 for 150 mm dia pipe complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement submersible copper cable 16 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

Material & Labour for taking down unserviceable motor from site transporting to workshop and back after repair including dismantling of motor & taking out burnt winding and re-winding with enamelled copper wire of same gauge including providing insulation as per existing including re-assembling motor after repair including greasing of bearings, including alignment and testing at site complete all as specified and directed by Engineer in charge.

Receiving/recording complaints lodged by the user/occupants of electrification nature, rectification of the fault as per the compaint lodged by the user onward KWH meter in respect of main distribution board, MCB distribution board in sheet metal enclosure, point wiring fixture for light/fan /bell /light or power sockets, metal clad plug socket complete repair to the extent by removing connections from the system, removing faults in (surface /concealed), circuits, sunken boxes, Junction boxes, main switches, MCBs / DBs any type of utility light fittings, lamp holders, AC, ceiling fan/ exhaust fan and other connected fixtures of internal electrification including providing stores such as wires of appropriate size and conductor matching to existing one upto the length of 2 mtr, insulation tape, screws, nuts required at the site to rectify the fault with regard to complaint lodged and re-fixing the fittings and fixtures to their original position as dismantled complete all as directed to the entire satisfaction of Engineer -in- charge . Note : (i) Any complaint left out / unattendent by the electrician will be communicated to the JE incharge /AGE E/M with reason. No charge will be paid for the complaint till the complaint is resolved. (ii) New material /stores provided for completing the job shall be measured and paid for separetely under relevant items of sch 'A'. (iv) Contractor shall provide the complaint register complaint slip serially numbered in triplicate.

Supply only switch piano type 5 Amps one way AC 230 Volts complete all as specified and directed by Engineer in charge.

Supply only switch piano type 5 Amps two way AC 230 Volts complete all as specified and directed by Engineer in charge.

Supply only switch piano type 15 Amps one way AC 230 Volts complete all as specified and directed by Engineer in charge.

Supply only switch/socket combination outlet 3 pin 5 Amps flush type (Multi purpose) piano type AC 230 Volts. complete all as specified and directed by Engineer in charge.

Supply only switch/socket combination outlet 5 pin 15 Amps flush type (Multi purpose) piano type AC 230 Volts.complete all as specified and directed by Engineer in charge.

Supply only ceiling rose 65x50mm two to three terminal AC 230 volts complete all as specified and directed by Engineer in charge.

Supply only Bell electric AC 230 Volts single pole.Complete all as specified and directed by Engineer in charge.

Supply only Bell push, flush type, 5 amp complete all as specified and directed by Engineer in charge.

Supply only lamp holder insulated body with back plate batten/angle type for batten fittings. complete all as specified and directed by Engineer in charge.

Supply & fix sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and directed by Engineer in charge.

Supply only LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in charge.

Supply only LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer in charge.

Supply only round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in charge.

Supply only cable flexible PVC insulated twin core with copper conductor of size 1.5 Sq mm complete all as specified and directed by Engr-in-Charge.

Supply only cable flexible PVC insulated twin core with copper conductor of size 2.5 Sq mm complete all as specified and directed by Engr-in-Charge.

Supply only plug top 3 pin 5 Amp AC 230 volts complete all as specified and directed by Engineer in charge.

Supply only plug top 3 pin 15 Amps AC 230 volts complete all as specified and directed by Engineer in charge.

Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed by Engr-in-Charge

All as per srl Item No 51 above but size 175 x 100 x 50 mm deep complete all as specified and directed by Engineer in charge.

All as per srl Item No 51 above but size 200 x 150 x 50 mm deep complete all as specified and directed by Engineer in charge.

All as per srl Item No 51 above but size 350 x 300 x 50 mm deep complete all as specified and directed by Engineer in charge.

Supply only capacitor AC 440 volts 2.5 mfd oil filled suitable for ceiling fan complete all as specified and directed by Engineer in charge.

Supply only capacitor AC 440 volts 3.15 mfd oil filled suitable for exhaust fan complete all as specified and directed by Engineer in charge.

Supply only 240V, 10KA 'C' curve MCB SP and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning SP complete all as specified and directed by Engineer in charge.

Supply only 240V, 10KA 'C' curve MCB SPN and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer in charge.

Supply only 240V, 10KA 'C' curve MCB SPN and current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning SP complete all as specified and directed by Engineer in charge.

Supply and fixing aluminium thimble (lugs) bottle type suitable for MCBs with sub circuit wires complete all as specified and directed by Engineer in charge.

Supply only stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engineer in charge.

Supply only Rigid non-metallic PVC conduit of external dia 20 mm exclusive of boxes (junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as specified and directed by Engineer in charge.

All as per srl Item No 62 but of external dia 25 mm complete all as specified and directed by Engineer in charge.

All as per srl Item No 62 but of external dia 40 mm complete all as specified and directed by Engineer in charge.

Supply only twin sub main wire 4.00 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable including continuous earth wire 2.5 Sqmm copper conductor insulated unsheathed complete all as specified and directed by Engr- in -charge. Note : Two run of single core cable 4 sqmm and one run of 2.5 sqmm cable measured as a one unit.

All as per srl Item No 65 but of 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed by Engineer in charge.

All as per srl Item No 65 but of 2x6.0 sq. mm + 1x4.0 sq. mm earth wire complete all as specified and directed by Engineer in charge.

Periodical mainteneance of DG Set any capacity upto 125 KVA by replacing fuel filter , Lub oil filter , by pass filter , air cleaner inner and outer element , water sepuatar, engine oil, cleaning of diesel tank , cleaning of radiator as recommended by manufacturer complete all as specified and directed by Engr-in-charge .((Note :- Fuel filter , Lub oil filter , by pass filter , air filter shall be replaced if required under respective items of this Sch under).

Supply only following items of DG Set of any cap upto 125 KVA , Make- cm /Greaves installed including taking out unserviceable items. (a) Fan belt .

(b) V Belt,.

(c) Lub oil filter .

(d) Fuel filter element .

(e) By pass oil filter .

(f) Air cleaner, inner element and outer .

Supply and fixing in replacement of maintainance free battery 12 volt 180 AH tubuler type including battery lead and intial charging of battery complete all as specified and directed by engr in charge

Checking and repair wiring of control panel /AMF Panel incl replace of defective wire and testing complete all as specified and directred by Engineer-in-charge

Supply and fixing in replacement of Over/under voltage Relay 3 phase 415 volts AC as complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of Engine starting / stopping Relay 12 / 24 Volt DC as complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of AC Timer 230 Volts having adjustment 0-60 Seconde complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of DC Timer 12/24 Volts having adjustment 0-60 Seconde complete all as specified and directed by Engineer in charge. .

Supply and fixing in replacement of Cranking Relay 12/24 V complete all as specified and directed by Engineer in charge.

Material & Labour High pressure pipe as per sample complete all as specified and directed by Engineer in charge.

Material & Labour radiator hose pipe as per sample complete all as specified and directed by Engineer in charge.

Replacement of tripping coil 24 Volts as per sample complete all as specified and directed by Engineer in charge.

Material & Labour coolant

Material & Labour Distilled water for battery refilling

Taking out LT cable of any size and any no. of cores from trenches and removing for relaying or replacement all as specified and directed by Engr-in-Charge

Relaying of Underground cable all as recovered item as above in trenches complete all as specified and directed by Engr-in-Charge

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 meter long) all as specified and directed by Engr-in-Charge

Supply and fixing poly carbon junction boxes with two no. Busbar of 25 amp capacity alongwith MCB SP 'C' type 6 amp complete with lugs and fixing of cable. Complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120.0 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95.0 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete all as specified and directed by Engr-in-Charge

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed by Engr-in-Charge

Sand filling in trenches for cushioning of Underground cables as layers of 8cm before laying and 15 cm after laying of cables complete all as specified and directed by Engr-in-Charge.

Supply & lay Sub class 'B' old size well burnt brick laid flat in trenches as protection to cable complete all as specified and directed by Engr-in-Charge.

Material & Labour for straight through joints for Underground cables 1100 Volts of size 50 to 95 Sq mm 3.5 core all as specified and as sirected by Engr-in-Charge

Material & Labour for straight through joints for Underground cables 1100 Volts of size 120 to 185 sqmm 3.5 core all as specified and as sirected by Engr-in-Charge

Earthing complete with copper earth plate electrode 600mm x600mm x 3.15mm thick burried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of the plate not less than 1.25 Mtr below normal ground level connected with 20mm x 3mm copper strip as earthing lead by means of bolts, nuts, check nuts & washers upto DB/Meter board including pit made by PCC 1:2:4 type B-1, RCC cover with suitable handle excavation and earth work in any type of soil, Medium grade GI watering pipe 20mm bore with funnel and wire mesh cmplete all as shown in electrical plate No. 3 of MES schedule 1991 (Part-1) connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engr-in-Charge.

Material & Labour for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed by Engr-in-Charge.

Material & Labour for Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed by Engr-in-Charge.

Repair of transformer of 100 KVA capacity copper wounded 1 No, step down 11 KV / 440 Volt to any authorised workshop with the following:- (a)Transportation of transformer copper wound 1 No., step down 11 KV / 440 Volt to any authorised workshop to facilitate the repair work. Transformer to be collected from Sub station at Jandwal at Pathankot and back to same site after carrying out the repair work, complete all as specified. (b) Opening the transformer, draining of oil and taking out core of tranformer by disconnecting the same from HT / LT bush rods, opening of core lamination and taking out all the HT coil of the transformer. (c) Rewinding of damaged HT coils with standard copper enamelled conductor including necessary insulating material such as paper insulating, cotton tape sleeves etc varnishing the complete HT coils including newly wound with 'F' class insulating varnish complete all as specified. (d) Assembling of laminations of core after inserting the newly wound coils with other coils and making connections of entire HT / LT limbs complete. (e) Heating the assembled core in oven to desired temperature and testing the same for required insulation result of transfomer.(f) Assembling of transformer after carrying out the repair work and making all HT / LT connections with respective bush rods. (g) Dehydration of transformer oil (drained from transformer) to get dielectric strength not less than 40 KV in 1st tripping with 5mm electrode gap and filling the same in transformer including any oil required to top up the transformer complete all as specified and directed by Engr-in-Charge.

All as per srl Item No 106 above but Transformer of capacity 200 KVA complete all as directed by Engr-in-Charge.

Repair to Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 150 KVA complete

Supply and fixing in replacement MCCB 125 Amp, 16 KA, 4 Pole complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 100 Amp, 16 KA, 4 Pole complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 63 Amp, 16 KA, 4 Pole complete all as specified and directed by Engr-in-Charge.

Material & Labour for repair of Ceiling Fan 1200 mm sweep including rewinding and replacement of bearing set, if required complete all as specified and directed by Engr-in-Charge.

Material & Labour for repair of Exhaust fan any sweep including rewinding and replacement of bearing set, if required complete all as specified and directed by Engr-in-Charge.

Painting of LT pole with recommended colour with paints two coat over a coat of red oxide complete all as specified and directed by Engr-in-Charge.

Servicing / Calibration to 11KV HT VCB/(SF-6 type) complete including the following (a) Taking out 11KV HT VCB/(SF6 type) of 400/800 Amps rating trolley from HT Panel after switching off electric supply.Checking of mechanical system for proper functioning of upward/downward movement of HT VCB/(SF6 type) trolley including opening the VCB/(SF6 type) & checking the mechanical system.Cleaning & servicing the fixed/ moving contact & blowing out dust and applying the proper lubrication/ greasing and reassembling the VCB/(SF6 type) including connection to HT panel complete insulating oil to be replaced where reqd all as directed by EIC. (b)Taking out relay set (2 Nos over current & 01 No earth fault relay) of any make from HT11KV VCB/(SF6 type) panel and cleaning the contact (NO+NC) by CTC solution and adjust the contact and calibrate the relay by relay testing kit & proper plug setting as per reqd load & time delay and fixing the relay set in HT panels complete all as specified and directed by Engr-in-Charge (Note for (a) & (b):- (1) Testing of above job to be carried out by engineers of authorised dealer/service centre of concerned OBC (iii) Replacing new items shall be measured and paid separately as supply only . (iv) Contractor shall submit the connected doCUMent/graph for relay calibration duly authenticated by authorised dealer / service centre).

Supply & Fixing shunt trip coil assembly suitable for HT,(SF6 type)/ VCB, operating on 30/110 volt system and testing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing closing/tripping coil operated on 110 /30 volt system suitable for working of relay of HT (SF6 type) / VCB complete all as specified and directed by Engr-in-Charge.

Supply and fixing (in replacement) of faulty oil temperature indicator with trip and alarm contacts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs spring charging motor suitable for fixing with 11 KV indoor type VCB panels complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs moving contacts of VCB made of copper and suitable for 11 KV VCB Trolley complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Lever type tripping/closing switch suitable for 11 KV VCB Panels, complete all as specified and directed by Engr-in-Charge.

Supply and fixing Ammeter digital type 100A/5A or 60A/5A CTR of 150mm x 150mm including taking out of old unserviceable ammeter complete all as specified and directed by Engr-in-Charge.

Supply and fixing Voltmeter digital type 15 KV of 110 V PTR. Size 150mm x 150mm including taking out old unserviceable Voltmeter complete all as specified and directed by Engr-in-Charge.

Supply and fixing power factor meter digital type of 146mm x 146mm including taking out of old unserviceable PF meter complete all as specified and directed by Engr-in-Charge.

Material and labour for removal of old paint from the existing VCB panels with the help of wires brush and applying one coat of synthetic enamel paint of the existing tint/colour complete all as specified and directed by Engr-in-Charge.

Supply and install HT triple pole 11000 Volts outdoor type gang operated air -break switch suitable for horizontal or vertical mounting on steel frame fixed type with drop out fuse having 12 insulators of rating upto 200 Amp, mechanically operated complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Battery 2 Volt, 100 AH for battery bank installed at sub stations complete with termination clips complete all as specified and directed by Engr-in-Charge.

Comprehensive/preventive maintenance of the following Window / Split ACs/ Water cooler/ Refrigerator/ Deep Freezer of different capacities by carrying out periodical maintenance of equipment including cleaning, lubrication, filling refrigerant gas etc, including chemical, anti moisture injection required for cleaning condenser/ cooling coils complete and attending complaints all as specified and as directed by Engr-In-Charge for 1.5/2.0 Ton capacity Split AC

All as per srl Item No 128 but of 1.5 / 2.0 Ton capacity window type AC

All as per srl Item No 128 but of Water cooler of any capacity

All as per srl Item No 128 but of Refrigerator of any capacity

Material & Labour for removing the old unserviceable hermatically sealed compressor unit from Water cooler of any capacity and fixing new sealed unit reciprocating type hermatically sealed compressor unit as per sample including charging of gas and oil to at adequate level complete all as specified and directed by Engr-in-Charge.

All as per item No 133 above here in before but for 1.5 /2TR split/window type AC complete all as specified and directed by Engr-In-Charge

All as per item No 133 above here in before but for any capacity refrigerator complete all as specified and directed by Engr-In-Charge

All as per item No 133 above here in before but for any Deep freezer of capacity complete all as specified and directed by Engr-In-Charge.

Supply only Running capacitor of capacity 30 to 42 MFD as per existing sample and requirement complete all as specified and directed by Engr-In-Charge

Supply only Running capacitor of capacity 45 to 60 MFD as per existing sample and requirement complete all as specified and directed by Engr-In-Charge

Supply only Starting capacitor, 40/60 MFD to 80/100 MFD as per existing sample and requirement complete all as specified and directed by Engr-In-Charge

Supply only Starting capacitor, 100/120 MFD to 120/150 MFD as per existing sample and requirement complete all as specified and directed by Engr-In-Charge

Supply only thermostat switch for cooling appliances as per existing sample complete all as specified and directed by Engr-In-Charge

Supply only Overload relay for cooling appliances as per existing sample complete all as specified and directed by Engr-In-Charge

Supply only Starting relay for cooling appliances as per existing sample complete all as specified and directed by Engr-In-Charge

Supply and filling of Gas R-22 for charging to window/Split Air conditioner/Deep freezer and water cooler to maintain adequate gas pressure complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement single phase preventer (Phase failure relay) suitable for star delta starters, of capacity upto 40 HP with auto, mannual and bypass operation, with time delay setting including wiring and connection with existing star delta starter complete all as specified and directed by Engr-in-Charge.

Material and labour for shifting of Split Air conditioner by safely removing it from existing location including making good to disturbed surfaces matching with existing and storing refrigerant gas securely and refixing the same at new location, providing proper insulation to copper tubing and extention of existing copper tubing, providing mounting brackets for indoor and outdoor units if required including testing after shifting complete all as specifed and directed by Engr-In-Charge.

Material and labour for servicing of AC plant any type and any capacity up to 12.5TR including, cleaning/descaling of cooling coil, insulation of suction and discharge line, oiling, greasing of blower motor, checking of electrical circuit supply and and replacement of defective filter, relay, capacitor, over load protector etc as required, rewiring and cleaning of condensor coils with Acid/ Scale removal compound for removal of scales deposited in condenser coils using suitable size iron rods/brush/water circulating pump etc.complete all as specified and directed by Engr-in-charge. Note: Acid/Scale removal compound and required T&P should be provided by contractor without any extra cost. Note: Items to be replaced needs to be checked only for serviceability and will be measured and paid seperately under respective item of schedule complete all as specified and directed by Engr-in-Charge.

Supply and fixing Filter drier with flared/soldered connection as per sample complete all as specified and directed by Engr-In-Charge.

Supply and fixing in replacement strip heaters 3.0 kilowatt suitable for mounting in AC Plant ducts or as required complete all as specified and directed

Material and labour for replacement of PVC honey comb fins suitable for cooling Tower of any capacity upto 3x12.5 TR complete as per sample all as specified and directed by Engr-in-Charge

Material and labour for replacement of water distribution flaps of cooling tower of AC Plant of any capacity upto 3x12.5 TR as per sample complete all as specified and directed by Engr-In-Charge.

Material and labour in replacement of air filter of AHU as per sample made of suiable filter with efficiency not less then 90% class 1 to 10 micron, matching with existing sample complete all as specified and directed by Engr-in-Charge.

Material and labour for cleaning of Cooling tower of any capacity by draining out water from inside, and including descaling of base tank and sprinkler including cleaning of complete assembly complete all as specified and directed by Engr-In-Charge.

Material and labour for cleaning of base tank of Air cooling plant having blower motor of 15 HP capacity by draining out water from inside and including descaling of tank and water sprinklers including cleaning of complete assembly complete all as specified and directed by Engr-In-Charge.

Supply and replace / top up of compressor oil N-68 to AC Plant compressor upto adequate level complete all as specified and directed by Engr-in-Charge.

Repair/servicing of air handling unit, cleaning of all duct from AHU to supply air grill and cleaning/descaling of cooling coil, water pressure meter, greasing to bearings and taking out the dust and mud complete all as specified and directed by Engr-In-Charge

Supply and fixing in replacement of LCD display cum operating unit for central AC plant of capacity upto 16.5 TR suitable for starting/stopping, adjustment of temperature, including display of temperature, and fault indications complete matching with existing complete all as specified and directed by Engr-in-Charge.

Material & Labour for repair of Geyser Tank of capacity 25 / 35 / 50 Ltr including replacement of Geyser element 1.5 KW as per sample, syphen assy including gasket and NRV complete all as specified and directed by Engr-in-Charge. (Note: Geyser Element, Syphen, NRV and Gasket will be measured and paid separately.

Supply and fixing Geyser element 1.5 KW including connections complete all as specified and directed by Engr-in-Charge.

Supply and fixing syphon assy including gasket & NRV complete all as specified and directed by Engr-in-Charge.

Vijay Kumar Contractor and Engineers (BID ID -3443497)

Ashoka Engineers (BID ID -3444613)

M/s bhuri and sons (BID ID -3444803)

INDERJIT SINGH (BID ID -3445012)

D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3445178)