Item 3 Additional Electrical work for Construction and Development of Chaupati at RHB Kota

Amount

Providing and Installation of Exhaust hood of size 3600 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 5400 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and Installation of Exhaust hood of size 2700 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 4500 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and Installation of Exhaust hood of size 1200 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 4500 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and installation Water Chiller unit of make SKODA and equivalent with 500 ltr tank capacity and 400-500 LPH Cooling Capacity, complete in all respect as per standard specification.

Providing and installation R.O. Plant of make Innoteck/Lubi of 1 HP Power and capacity of discharge 2 cum per Hour including multi-grade media filter, activated carbon filter and micron filter as per standard specification including High pressure pump of 2 HP, R.O. Stream and interconnecting pipe etc. complete and required instruments like ROTA Meter, Pressure gauge , labour controller, UV Disinfection System, with electronic control panel, complete in all respect as per standard specification, running and maintenance up to 1 Year.

S.I.T.C. of Desert Type Tent Cooler Suitable to installed in open area around the shop with having the maximum cooling capacity area more than 2000 Sq ft with 90/120 ltr water capacity, complete as per standard spesification, as per Direction of Engineer in charge.

Providing and Fixing Panel Light for Celling 595x595 (48 Watt) complete as per standard spesification, as per Direction of Engineer in charge.

Surface Type Commercial Signage’s of Size 1.00 x 2.00, frame to be made of 65 mm Depth aluminium Section with Acp Sheet / GI Sheet on the back , With ACP Border as per design Led modules powered by samsung + Water proof power Supply + wiring etc….. All Electrical items. and to be fixed on Wall with all necessary Civil, fabrication and Installation process, as per drawing and design, complete in all respect as per directed by Engineer in Charge.

Supplying and installation Mosquito/insect Killer 2 tube 9” white) of height 28" width 12.5" and length 27.5" and approx weight 2 kg. of approved make, complete in all respect as directed by engineer in charge

Supplying and Fixing 26 Inches Big Spray Water Mist Fan of 6.5 Ft. Height with 45 Litter Tank Capacity 6-8 Hours Running Time of approved make, complete in all respect as directed by engineer in charge

Providing and Fixing Mic18 AWG cable roll of approved make,complete in all respect as directed by engineer in charge

Providing and Fixing Weather-proof Plastic 3 Modular switch board with 16 amp switch & socket ( Legrand, C&S, Honeywell, Hensel or Superior similar make ) of approved make, complete in all respect as directed by engineer in charge

Providing and Fixing Weather-proof Junction Box of approved make, complete in all respect as directed by engineer in charge

Providing and Fixing 16 Amp 5 PIN ip 67 weather proof pluge suitable for weather proof switch board ( Legrand, C&S, Honeywell, Hensel or Superior similar make ) of approved make, complete in all respect as directed by engineer in charge

Providing and Installation Rechargeable Emergency LED Flood Light 30/50 watt (Backup - 2 Hour) , LED Efficiency 100 lm/watt., input voltage Range 230 V AC , Color Temperature 6500K. Light should be in OFF condition when power suppy in ON & Light should be in ON Condition Automatically when Power goes OFF. Complete in all respect and as per Engineer in Charge

12 LED Flexible strip lighting systems to be Cut to the desired length12W/m IP67 120pcs 400lm/m 2700-6000K Dimension: 5m / Roll. Wattage 12W/m. Dimension 12mm 5m / Roll. 120 LEDs per metre. Integrated with SMD 2835 LEDs. Symmetrical Constant current LED driver (5Amp). CRI is >90. Protection class IP67 for LED strip. CE – Conformity mark. Low Voltage at 12V dc assures safety. Lamp flux: 830.694x1 lm . Beam angle: 120 deg.

12 Watt recess type LED WW,CW,NW

Euro Lighting Pole - 3.66 Meter Euro Lighting Pole Ht.3660

Foundation Bolt M16 X 300 MM Long

Ring Fort LED Post Top Fixture integrated with 24W LED WW, CW, NW Suitable for Euro Pole

Supply, Installation, Testing and Commissioning of Media player compatible with the existing LED Wall , testing on network and Software installation in Media player , connecting with video wall controller ( Detail specification enclosed with G-Schedule)

Providing and Fixing of LED Video wall structure as per drawing and specification enclosed with schedule.( Sheet 10F5 to 50F5)

2MP IP Bullet/Dome Camera 1/2.8" Progressive CMOS, lens 4 mm, ICR, Color: 0.028 Lux @(F2.0; AGC ON), 0lux with IR, 1920x1080: 25fps(P)/30fps(N), H.265+/H.265/H.264/MJPEG, DC12V & PoE, 3D DNR, BLC, HLC, IR range: up to 40m, Support on-board storage (SD card not included), HIK-Connect cloud service. 3-Axis Adjustment

Supply, installation and commissioning of 16-Channel Video, 1-Ch audio Embedded DVR, Each DVR with 400ips display and 400 ips recording, 1TB HDD built, CDRW, PAL, capable of 8 Internal HDD's.

Supply, Installation and commissioning of 32" Color Monitor

Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required.

Public address system

Full range surface mount loudspeaker with frequency response of 80Hz to 17kHz; power handling of 40W; Nominal dispersion of 125H X 125V; Sensitivity of 87 db SPL and Max SPL of 103 db SPL; Transformer tapping can be done. Brackets included. Bose Ds40SE

Power Amplifier Maximum Rated Power: 2 x 1000 W (THD+N < 0.04%, 1 kHz, 4-8 Ω , 70/100V) Bose Powershare 21000

Speaker Cable ( Krystal 1.5Sqmm )

Supply of Wireless Handheld Microphone set: having superior Dynamic Tansducer with cardioid or better polar pattern, Up to 24 MHz switching Bandwidth, Should haveSignal to noise ratio >102dBA or better, Total Harmonic Distortion should be <0.9%, Transmitter sync should be on 2.4GHz, Frequency Response: 80 to 16000Hz or better, Sensitivity: < 3 μV at 52 dB(A), Should have RF Power of 10mW or better, Should have mute/unmute button, Operating time: up to 10 hours or better.

Supply of wired Handheld Microphone having Dynamic cardioid microphone tranducer with cardioid polar pattern.Frequency response (Microphone) 40 - 16000 Hz or better, Sensitivity in free field, no load (1kHz) 2,7 mV/Pa or better. Nominal impedance 350 Ω, MIcrophone should have mute/unmute button.

Supply of a dual 10-inch IP55 rated (as per IEC 60529) high excursive surface mountable all weather subwoofer. The louspeaker shall meet the following performance criteria:Frequency Range (-10 dB) of 37Hz - 270Hz; Nomina Dispersion : omni-directional; Power handling of 2000W peak; Sensitivity : 96 dB; Max SPL : 129dB Peak; Nominal impedence of 8 ohms. The loudspeaker system shall be comprised of a Powder-coated finish stainless steel grille with Two-part spray polyurea coating Exterior-grade plywood enclosure; U bracket shall be included.

Supply of 12 channel Compact Mixing System (8 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel toChannel < -80 dB, THD at 1 kHz < 0.005%.

Supply of Weather Proof POP Boxes

Supply of MIC Stand

Supply of Ticket Window mic And Spekare

Supply of LED Processor for Live and PPT mode

Supply of XLR M/F mic cable for mic 10mtr.

Outdoor LED Display –Display Size (W x H) LED Display of 12.5 feet X 9.44 feet Pixel Pitch 6 mm±5% or better, LED Configuration RGB 3 in 1 SMD ,LED Lamp Gold wired LED lamp ,Pixel Density Minimum 14400 pixels per sqm or higher Half Gain Horizontal / Vertical Viewing Angle H 140 deg / V 90 deg or better ,Refresh Rate >1920 Hz or better Temp Range -20 to +50 Degrees C or better Grey Scale Processing 14 Bit or better Colours 4.4 Trillion colours Brightness 5000 cd/m² or better Maximum Power Consumption 900 w/sqm or lower Dimming Capability 255 levels Power Input 100 ~ 240 VAC Contrast Ratio 3000:1 or better Access For Maintenance Front IP Level Front : IP65 , Rear : IP 65 LED Tile/ Cabinet Calibration LED tiles/cabinets should be calibrated before being supplied. These screens should also be calibrated after the installation to ensure brightness uniformity. Calibration should also be performed as and when it is required during the warranty period. Offered product which does not support dot calibration shall be rejected Brightness measurement tool Emitted brightness measurement tool namely a luminance meter (which can provide direct brightness reading in cd/m²) for brightness measurement of offered LED screen. OEM of LED Display should provide details (Model No. & Date of Purchase) of the luminance meter available with them in India along with its latest calibration certificate. The same instrument shall be used to check the minimum brightness levels as offered in the bid. Please note- Illuminance meters are not acceptable as they are not for measuring emitted lightInternational Safety Certifications( Mandatory to submit along with the bid) BIS Registration (Bureau Of Indian Standards) As per Standard: IS 13252 ( PART 1) :2010. Offered model BIS certificate should be on OEM brand and their own manufacturing unit in India. Valid BIS certificate to be provided for the offered LED tiles/cabinets. BIS certificate for led module only shall not be considered as valid BIS certificate for the product. The offered model should be clearly mentioned in the BIS certificate. This certificate shall be submitted at the time of bid. Quality/Health & Safety/Environmental Certifications of OEM/OEM subsidiary in India ( Copy to be submitted along with the bid Quality Management System 9001:2015 , Occupation health & Safety Management System - OHSAS 18001:2007 Environmental Management System 14001: 2015 Approved Brand :Daktronics/Delta /Mitsubishi /NEC

Bidder Name

Amount

Raj Electricals(GSTN-08AGBPS1419A1ZV)