Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.1 Craccepted-aoc | ₹2.1 Cr | accepted-aoc |
Tender Value
₹2.0 Cr
EMD Value
₹3.8 L
Closing Date
19 Jul 2025, 9:30 pmClosed
Bruhat Bengaluru Mahanagara Palike
S K HEMANTHKUMAR
Improvements of roads and drains at Mico Layout, JC Nagara and surrounding area in Mahalakshmi Layout ward no.48
BBMP/2025-26/RD/WORK_INDENT8089
BBMP/2025-26/RD/WORK_INDENT8089
Open
Roads
Two Tender Document System(Two Cover)
BBMP Mahalakshmipuram West
9 documents required · 9 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending tenderer should submit work done certificate for the following nature of work executed in one years (2020-21 to 2024-25), the following Prime quantities executed in any one year among last five years: (usually 80% of the peak annual rate of construction)
The intending tenderer should submit work done certificate for the following nature of work executed in one years (2020-21 to 2024-25), the following Prime quantities executed in any one year among last five years: (usually 80% of the peak annual rate of construction AS PER KW4 BID DOCUMENT
Mandating satisfactorily completed (at least 90% of the contract value) as a prime contractor in similar nature of single work value not less than 50% (Rs125.00 lakhs) of the tender value. Similar nature of work means the contractor should have completed (at least 90% of the contract value). The intending bidder should submit completion certificate / work done certificate along with the contract certificate copies related to the work certified by the Engineer not less than the rank of Executive Engineer. (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited) (Work Done Certificate Along with Indent Number
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) AS PER KW4 BID DOCUMENT
Liquid assets and /or availability of credit facilities of no less than Rs.75.00 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)
List of existing commitments and ongoing works
Achieved a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 500.00 Lakhs in at least two financial years. The tenderer should submit VAT/GST certificates to confirm the Annual turnover. The certificate should be duly certified by the Chartered Accountant in the turnover format. (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited)
₹5,000
₹3.8 L
19 Jul 2025
11 Jul 2025
21 Jul 2025
14 Jul 2025
14 Jul 2025
Improvements of roads and drains at Mico Layout, JC Nagara and surrounding area in Mahalakshmi Layout ward no.48
Removing and refixing cover slabs of drains and pointing in C.M (1:2).
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing BS Slabs of selected quality roughly dressed having a size of 10cm thick and fixed in cement mortar (1:6) including fixing curing etc.., complete as directed by the Engineer in charge of the...
Providing Machine cutting edges to B S slab 2.5cms wide as per specifications. (Only chamferred length shall be recorded) inclusive of all taxes complete as directed by the engineer in charge of work ...
Providing one line dressing to granite stone slab/ granite stone masonry as per specifications as directed by the Engineer in charge of the work.
Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165mm respectively, 400mm high and 450mm in length finished with C:M 1:3 plastering an...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces
Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum. (Tipper 5.5 m3 )
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...
Dense Graded Bituminous Macadam Grading - II for traffic 20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom.
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 percent of mix and filler, tr...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...
Removing and resetting of kerb stones.
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Dismantling chain link fencing including removing the posts, cement concrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direct...
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25...
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Thickness above 40 mm up to 75 m...
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to t...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Precast Slab Of 100mm Thick Including Cost of All Materials, Labour, Curing, Transporation, loading,Unloading,Etc., Complete As per The direction Of Engineer Incharge .
Supplying and fixing new Mangalore tiles on existing reepers.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Fabricating providing and erecting in position hot dip galvanised sq, hollow pipes of 132x132 Heavy gauge of length 3000mm with MS Hot dip galvanized grill work as per approved design and drawing of c...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...
Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including ed...
Fabricating, providing and erecting in position Hot dip galvanised Gate. Using 72 x 72 x 4.8 mm Sq. Gl Pipe frame with top pipe bending in heavy duty hydraulic press with sand packing and hot bending ...
Painting two Coats after filing the Surface with synthectic enamel paint in all shades on new plastered concrete surfaces
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all d...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufa...
Executive bench - made out of sadarohally grey stone with hand supporter with 3 line finishing with arch design wit 100mm slab height 90x150 width 45cm
Developing the area for shurbs by digging to a depth of 0.45m, filling 50% with sand (0.0375cun),Fym(0.075cum), Red earth )(0.112cum).(i.e, in the proprtion of 1:2:3). And planting with well establis...
Cost of the plants (8 Plants per Sq.m)including transportation and handling charges.
Scrapping and removing top soil(For lawn area only) :Cleaning the site by scrapping and removing top layer of soil , removing unwanted debries,grass along with excavted earth to a distance of 500m fr...
1st Digging:Earth work digging including removing weeds, debris if any and be clumps watering etc. to depth of 0.45m(1X 0.45m)
2nd Digging :Digging for second time and removing weeds, if any minor levelling etc. to a depth of 0.45M.
Soil Filling For Lawn : Supplying and stocking good quality,Red earth for filling the top layer to depth of 0.15m(1X1X0.15m).(BBMP Com AP18-19 Rates P3, I No:13d )
Laying, installation, testing & commissioning of 12/24/48 F Optical fibre approach cable in switch yards of 400 kV & 220 kV (Including hardware) along with HDPE Pipe
Led Titanium lettered name board
LED Tube Light Fitting with Tube
N2MP etwork IP Camera
4TB survelnave HD.
6 OFC (Optical fiber cable) Single mode @
Camera mounting
1.2 sqm 2 core Power cable
Data cable for all cameras
4 port POE switch
Media converter
Chemical earthing
8 port LIU with fully loaded
Splicing Enclosers
OFC path cable SC- SC
32 amps MCB with 3 pin socket each box
24 Port LIU with fully loaded
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Digging pits of size 0.75mX0.75mX0.75m and filling upto50% of the pits with top excavated of soil and remaining50% with sand, Fym , Red Earth(0.021cum).(i.e,in the proportion of 1:2:3).And planting of...
Cycas Revoluta (a) 90cm dia ,100 cm ht
Cycas Revoluta (b) 60cm dia ,60 cm ht
DOUBLE HEALTH WALKER Top caps 4 nos.
DOUBLE HEALTH WALKER SKF 6207 bearings 12 nos
DOUBLE HEALTH WALKER SKF 6205 bearings 16 nos.
DOUBLE HEALTH WALKER 60mmx60mm housing4 nos
DOUBLE HEALTH WALKER Aluminium foot rests 4 nos.
DOUBLE HEALTH WALKER Removal of existing paint and Re-painting
AIR WALKER Change of solid housing (4 Nos)
AIR WALKER Top caps 4 nos
AIR WALKER SKF 6207 bearings 10 nos
AIR WALKER 60mmx60mm housing2 nos
AIR WALKER Aluminium foot rests2 nos.
AIR WALKER Removal of existing paint and Re-painting
ROWER Top caps 4 nos
ROWER SKF 6207 bearings 10 nos
ROWER 60mmx60mm housing2 nos
ROWER Aluminium foot rests2 nos.
ROWER Removal of existing paint and Re-painting
HIP SWIVEL Top caps 4 nos
HIP SWIVEL SKF 6207 bearings 10 nos
HIP SWIVEL 60mmx60mm housing2 nos
HIP SWIVEL Aluminium foot rests2 nos.
HIP SWIVEL Removal of existing paint and Re-painting
TAI CHI SPINNERS Top caps 4 nos
TAI CHI SPINNERS SKF 6207 bearings 10 nos
TAI CHI SPINNERS 60mmx60mm housing2 nos
TAI CHI SPINNERS Aluminium foot rests2 nos.
TAI CHI SPINNERS Removal of existing paint and Re-painting
LEG PRESS Change of solid housing (4 Nos)
LEG PRESS Top caps 4 nos
LEG PRESS SKF 6207 bearings 10 nos
LEG PRESS 60mmx60mm housing2 nos
LEG PRESS Aluminium foot rests2 nos.
LEG PRESS Removal of existing paint and Re-painting
CHEST PRESS Converting the existing system to flange system with foundation covers
CHEST PRESS Changing of seats
CHEST PRESS Top caps 4 nos
CHEST PRESS Removal of existing paint and Re-painting
EXERCISE CYCLE Changing of seats
EXERCISE CYCLE Changing of pedal housing and bearing
EXERCISE CYCLE Changing of pedals
EXERCISE CYCLE Removal of existing paint and Re-painting
SHOULDER PRESS Top caps 4 nos
SHOULDER PRESS SKF 6205 bearings 16 nos.
SHOULDER PRESS Changing of top handle
SHOULDER PRESS Removal of existing paint and Re-painting
SPINNER Change of round steerings
SPINNER Top caps 4 nos
SPINNER SKF 6205 bearings 16 nos.
SPINNER 60mmx60mm housing2 nos
SPINNER Changing of nylon handles
SPINNER Removal of existing paint and Re-painting
SITTING ROTATION Top caps 4 nos
SITTING ROTATION SKF 6205 bearings 16 nos.
SITTING ROTATION Removal of existing paint and Re-painting
STANDING ROTATION Top caps 4 nos
STANDING ROTATION SKF 6205 bearings 10 nos
STANDING ROTATION 60mmx60mm housing2 nos
STANDING ROTATION Removal of existing paint and Re-painting
ELLIPTICAL CROSS TRAINER Changing of nylon caps
ELLIPTICAL CROSS TRAINER SKF 6205 bearings 10 nos
ELLIPTICAL CROSS TRAINER SKF 62057bearings 10 nos
ELLIPTICAL CROSS TRAINER 60mmx60mm housing2 nos
ELLIPTICAL CROSS TRAINER Aluminium foot rests2 nos.
ELLIPTICAL CROSS TRAINER Removal of existing paint and Re-painting
Supplying Electrician
Supplying office supervisor
Supplying of Watchmen
Supplying of Gardner
Supplying of Cleaner
Air Freshener Cakes
Naphthalene Balls
Plastic Dust Bin Cover
Mop Stick With/Cloth
Harpick Liquid(500 Ml)
Liquid Hand Wash 250ml
Plastic Buckets
Plastic big dust pan
Hard Broom stick
Bleaching powder
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
tender notification 05.docx
Others - TENDER NOTIFICATION • 0.03 MB
KW4 Tender SLNO-3.doc
Others - KW4 BID DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .