Providing and fixing Welded Mesh panel fencing and raising of exist.Height RCC B/wall in yard under ADEN/Amalner section of Sr. DEN(E) MMCT between the Ukaisongadh - Jalgaon section of Western Railway.

Item Breakup - A-All CPWD DSR 2021 items

Item Breakup - B-All USSOR 2021 items

15.00 by Railways with verticals provided at every 1.5m interval, height of barricade being up to 1.5m above ground / termination level and one or more row of horizontal rail, duly cutting rails and drilling holes as required, assembling necessary accessories to required length, including earthwork excavation for foundation, fixing posts in cement concrete 1:3:6 base of size 0.45m x 0.45m x 0.60m and one coat of red oxide painting of steel work. Note: 1. Excavation and concrete work will be paid separately. 2. Rail shall be made available within 250 metres Total 27291.60 Item- 2 USSOR 2021 Chapter 21 S No. Item Description of Item Unit Qty Rate Amount No Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

50.00 with minimum 1.10 cum bucket capacity

50.00 crane of 12T capacity for misc. works of handling of material Total 148224.50

Item Breakup - C-ALL NS ITEMS

Extra for additional height of Galvanized Kg Channel Post (150 x 75 x 4 mm) and other Galvanized material 4650 Total 63616.00 Item- 2 Metal beam Crash Barrier - Double W Single side :- Providing and erecting W metal beam S No. Item Description of Item Unit Qty Rate Amount No MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Metal beam Crash Barrier - Double W Single RM side :- Providing and erecting W metal beam 02 nos barrier comprising of 2mm thick corrugated sheet metal beam rail on 1.50m high channel post (150x75x4mm) above ground level and 1.20m below ground level, spaced at 2m center to center, all steel parts, all fittings and fitments to be galvanized by hot dip process confirm to IS 4759, metal beam rail to be fixed on the vertical post complete. Work will be carried out as per Railway approved drawing and as per specification and special condition of contract attached herewith. The post should be place below G.L. by driven mechanidsmor auger mechanism as directed Engineer in charge as per site conditions. The concrete and shuttering as and when required will be paid under the relevant items. Note :- The item rate includes with materials , labours, lead, lift, loading, unloading, tools and plants, all taxes, site cleaning, bush cutting, preparation of approach path, manual carting of materials due to unavoidable site requirement, etc with contractors own materials and labours necessary for doing all the work involved in constructing the material beam railing barrier complete in place in all respect as per the specifications. Work will be carried out as per direction and instruction of Engineer in charge ofwork/ Engineer representative. (no any extra payment shall be paid by Railway) Total 1329380.00 Supply of Welded Mesh Panel fencing (powder coated material 80 micron)Raw material GI wire Item- 3 (4mm dia.) mesh size 50x200mm and panel size 1800mm x 2500mm must be manufactured from wire rods rolled S No. Item Description of Item Unit Qty Rate Amount No MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply of Welded Mesh Panel fencing Kilometre (powder coated material 80 micron) specification as per provided in the quotation enclosed herewith. (Rate including GST & Contractor profit). Raw material GI wire (4mm dia.) mesh size 50x200mm and panel size 1800mm x 2500mm must be manufactured from wire rods rolled only from secondary refined steel (at least LRF treated). Wire rods should strictly conform with the requirements of IS 7887 and IS 280.Only hot dip galvanized wire should be used in making the fencing product. Zinc used for galvanizing should be of at least 99.95% purity for better corrosion resistance. In the galvanizing process, the Zinc bath should be free from addition of lead.GI wire used should have a secondary coating of organic/inorganic nature with thickness not more than 5 microns Secondary coating should be completely non-hazardous to humans and animals. Should be free from Chromium and other heavy metals such as lead, mercury, Arsenic &Cadmium. When tested as per ASTM B117, secondary coated GI wire should display time to reach 5% red rust, at least 2 times that of normal GI wire of same Zn coating level. Powder coated fence post (RAL 6005) with 80micron thickness of dimension 60x40x2mm and length 2400mm (GI RHS- 120GSM ) with spider clamps, anchor rods and SS 304 mushroom carriage nut bolt with security nut to be supplied alongwith hot dip galvanized anchor rods. Powder coating must withstand 1000 hours of salt spray test. Erection of fencing including all fitting, fixing and excluding the foundation of Civil Works. (Rate including GST & Contractor profit). Total 272690.81 Supply of Welded Mesh Panel fencing (powder coated material 80 micron)Raw material GI wire Item- 4 (4mm dia.) mesh size 50x200mm and panel size 1500mm x 2500mm must be manufactured from wire rods rolled S No. Item Description of Item Unit Qty Rate Amount No MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply of Welded Mesh Panel fencing Kilometre (powder coated material 80 micron) specification as per provided in the quotation enclosed herewith. (Rate including GST & Contractor profit). Raw material GI wire (4mm dia.) mesh size 50x200mm and panel size 1500mm x 2500mm must be manufactured from wire rods rolled only from secondary refined steel (at least LRF treated). Wire rods should strictly conform with the requirements of IS 7887 and IS 280.Only hot dip galvanized wire should be used in making the fencing product. Zinc used for galvanizing should be of at least 99.95% purity for better corrosion resistance. In the galvanizing process, the Zinc bath should be free from addition of lead.GI wire used should have a secondary coating of organic/inorganic nature with thickness not more than 5 microns. Secondary coating should be completely non-hazardous to humans and animals. Should be free from Chromium and other heavy metals such as lead, mercury, Arsenic & Cadmium. When tested as per ASTM B117, secondary coated GI wire should display time to reach 5% red rust, at least 2 times that of normal GI wire of same Zn coating level. Powder coated fence post (RAL 6005) with 80 micron thickness of dimension 60x40x2mm and length 2100mm (GI RHS- 120GSM ) with spider clamps, anchor rods and SS 304 mushroom carriage nut bolt with security nut to be supplied along with hot dip galvanized anchor rods. Powder coating must withstand 1000 hours of salt spray test. Erection of fencing including all fitting, fixing and excluding the foundation of Civil Works. (Rate including GST & Contractor profit). Total 268267.56 Supply of Welded Mesh Panel fencing (powder coated material 80 micron)Raw material GI wire Item- 5 (4mm dia.) mesh size 50x200mm and panel size 1200mm x 2500mm must be manufactured from wire rods rolled S No. Item Description of Item Unit Qty Rate Amount No MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply of Welded Mesh Panel fencing Kilometre (powder coated material 80 micron) specification as per provided in the quotation enclosed herewith. (Rate including GST & Contractor profit). Raw material GI wire (4mm dia.) mesh size 50x200mm and panel size 1200mm x 2500mm must be manufactured from wire rods rolled only from secondary refined steel (at least LRF treated). Wire rods should strictly conform with the requirements of IS 7887 and IS 280.Only hot dip galvanized wire should be used in making the fencing product. Zinc used for galvanizing should be of at least 99.95% purity for better corrosion resistance. In the galvanizing process, the Zinc bath should be free from addition of lead.GI wire used should have a secondary coating of organic/inorganic nature with thickness not more than 5 microns. Secondary coating should be completely non-hazardous to humans and animals. Should be free from Chromium and other heavy metals such as lead, mercury, Arsenic & Cadmium. When tested as per ASTM B117, secondary coated GI wire should display time to reach 5% red rust, at least 2 times that of normal GI wire of same Zn coating level. Powder coated fence post (RAL 6005) with 80 micron thickness of dimension 60x40x2mm and length 1800mm (GI RHS120GSM ) with spider clamps, anchorrods and SS 304 mushroom carriage nut bolt with security nut to be supplied alongwith hot dip galvanized anchor rods. Powder coating must withstand 1000 hours of salt spray test. Erection of fencing including all fitting, fixing and excluding the foundation of Civil Works. (Rate including GST & Contractor profit) Total 264156.46 Supplying & Fixing of Murals. On Hand made ceramic tiles of 14-16mm thickness & hand painted of Item- 6 required design very similar to FLORA & FAUNA S No. Item Description of Item Unit Qty Rate Amount No

Supplying & Fixing of Murals. On Hand made Square ceramic tiles of 14-16mm thickness & hand Foot painted of required design very similar to FLORA & FAUNA of local heritage and kiln fired at 1030 c of size 6 X 6 tiles of approved color & design including border tiles all around. In the concourse hall of newly constructed station Buildings at location approved by Engineer in charge with 20mm thick cement mortar 1:3 Note:- Rate shall be inclusive cost of cement, sand, labour tools & plants transportation, loading & unloading and all taxes etc complete. Total 738200.00