SPL REPAIR TO JCO MESS COOK HOUSE OF 24 GUARDS (17 GRENADIERS) AT POKARAN MILITARY STATION

Amount

Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level)

Dismantling structural steel works including steel work in doors, gates, framed truss etc complete all as specified and as directed.

Dismantaling Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 100 mm thick as in sub base for floors, complete all as specified and directed.

M&L for coloured Glazed ceramic tiles invertical surface 350x 250x 7 mm/ 450X 350X 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match in white or coloured cement to match over 10 mm backing coat in CM1:3 including complete all as specified and directed.

M&L Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including screed bed 15 mm thick in CM (1:4)

All as per item No.05 here in before, but on vertical surface over a backing coat of 10 mm thick plaster in CM 1:3 complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 20mm cement mortar screed 1:3 including pointing in white cement using marble dust with admixture of pigment to match with shade of granite.and black

M&L for machine cut kota stone slab flooring 20 mm thick Kota stone slab mirror finished of minimum size 550mmx550mm laid over 20mm thick bedding (screed) layer in cement mortar (1:4) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over all as specified and directed by Engineer-in-charge.

M/L Machine cut kota stone slab flooring 20mm thick in riser of steps, skirting,dado,and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 20 mm thick backing coat of CM (1:4)

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460mm bowl size 410mm x 330mm x 160mm

S&F PVC waste pipe 50 mm dia for sink

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in plinth protection finished even and smooth all as specified.

Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed.

Dismantling Stone slabs in roofs, suspended floors , chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed by the Engineer-in-Charge.

M&L forJodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and set in cement mortar 1:3 complete all as specified and as directed by the Engineer-in-Charge

M&L forJodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and set in cement mortar 1:3 complete all as specified and as directed by the Engineer-in-Charge but Except stone slabs

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 40 mm as per the requirements all as directed by Engr-in-Charge.

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)

Supply only integral Waterproofing compound.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane all as speficied and directed.

Taking down cement plaster on walls and roof ceilings etc., including racking out joints, hacking for key, scrubbing down with water etc. to receive new plaster

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in two layers Ist layer shall be 10mm thick plaster in CM (1:6) , second and final layer shall be 5mm thick in CM (1:4) mixed with integral Water Proofing Liquid / Powder ISI Makeed finished fair and even complete all as specified and directed.

M&L rendering 10mm thick in 1:3 cement plaster on ceiling of stone surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 1.5 to 2 thick wall care putty on wall complete all as specified and directeded.

M&L preparation of new wall surface and applying three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete.

M&L for preparing old painted surfaces and applying a one coat of oil bond distemper on surfaces of walls complete all as specified & directed by Engineer-in-charge.

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area n exc. 1.50 Sqm each and removing to store

Taking down Chowkat or frames with shutters (with out taking off shutters from the frames) area exc 1.50 sqm and n exc 4.00 sqm

M/L for Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A

Second class HW rail and style plain frame factory made moulded panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veeneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated.

M&L for II nd class hard wood Glazed and skeleton shutters, 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane.

S&F mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F Aluminium alloy , anodised sliding door bolt 300 mm long with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and direction.

Preparation of new Steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and direction.

Dismantling water tanks and removing to store capacity of tank exc 500 and n exc 1000 ltr)

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc.

Ditto all as per item No- 49 here in before but 20mm dia pipe

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc.

Ditto all as per item No- 50 here in before but in 20mm bore pipe

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs

S&F in repairs bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

S&F in repairs Viterious china White Wash Hand Basin of fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long

Demolition of stone/ boulder masonry and built in cement mortar all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Taking down cup board and wiremesh or panelled shutter of any description, Shutters of any description n exc 1 sq. m eacheach complete all as specified and directed.

S & F fixing factory made 18mm acrylic HDHMR board in modular kitchen shutters with 1mm same edge bending on edges for kitchen cabinets/Cupboards etc. including fixed with nut, screws, washers, nails all as specified and directed by Engr-in-charge.

supply and fixing factory made 9mm both side laminated board, interior grade, prelaminated both sides with decorative choice laminations, including fixed with nut, screws, washers, nails all as specified and directed by Engr-in-charge.

supply and fixing factory made 18mm both side laminated HDHMR board in modular kitchen carcasse made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and directed by Engg-in-charge.

M&L for 18/19mm in repairs thick pre-laminated particle boards , interior grade , prelaminated both sides with decorative choice lamination fixed to timber frame-work with screws fixed in repairs complete all as specified and directed.

M&L for second class clean sawn hardwood in scantling fixed in timber framed work for cupboardframe complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 75 mm size.

S&F mild steel butt hinges minimum weight 50 mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F in repairs stainless steel plate rack of 1200X900X250mm fixed to wall complete all as specified and directed by Enginer in charge.

Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. all as directed by EIC

Taking down old unsv MCB DB / Main switch complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. for stone concrete block or slab walls and making good, cutting exceeding 20cm girth

M&L point wiring complete with 1.5 Sqmm single core PVC insulated FRLS cable 1100 Volts grade multistranded copper conductor drawn through in PVC Conduit concealed on underground stone / brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly for One light point / Fan point / Exhuast Fan / Bell point controlled by one 5 Amps One way switch and making good surfaces all as specified and directed by Engineer-in-Charge.

All as per Item No. 04 but for one 3 pin 5/6 Amps switch socket outlet on same board

All as per Item No. 04 but for one 3 pin 5/6 Amps switch socket outlet on independent board

All as per item No.04 above but wiring with 4.0 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

M&L switch piano flush type single pole one way 15 Amps complete all as specified and directed.

M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed.

M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and directed.

S&F Ceiling fan regulator Stepped type, 120 W-2 module AC 240 V all as specified and directed

M&L lamp holder insulated body with back plate suitable for battern fittings

supply and fix LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified

S&F Sheet Modular metal enclosure DB SPN 240 Volts 12 Way single door type with 200 Amps busbar for fixing of MCBs

S&F MCB Single pole and neutral, 40A, 240 Volts AC all as specified

S&F MCB Single pole, 5-32A, 240 Volts AC all as specified

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified

M/s Rashid Mohammed (BID ID -3366573)

M/s Shri Inder Construction Company (BID ID -3365653)

SHRI K P ENTERPRISES (BID ID -3370946)