PROVN OF ALTERNATE ENTRY EXIT GATE AND SECURITY SHED AT VIJAY BAUGH AND OTHER REVENUE MINOR WORKS AT NSRY SVP UNDER GE HADDO SRI VIJAYA PURAM

Excavating in trenches, n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in width and getting out in Hard Dense soil complete all as specified and directed

Excavating in trenches, beyond 1.5 m and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in width and getting out in Hard Dense soil complete all as specified and directed

Excavating over areas, n exc 1.5 m deep and getting out in Hard Dense Soil complete all as specified and directed

Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches complete all as specified and directed

Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m complete all as specified and directed

M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed..

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/ stainless steel screws, all complete as specified and as directed.

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed. Note- Supply only of ACP sheet/glass/alluminium alloy wire cloth for doors and windows to measured and paid separately. Fixing of glass, ACP sheet are included in this item.

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long in PVC doors complete all as specified and directed

S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and directed