SPL REPAIR 01 X COOK HOUSE AND 02 X TOILETS INCL WATER PROOFING OF BLDG NO T-222 OF FD AMB UNDER GE (EAST) MATHURA

Amount

Dismantling brick / concrete tiles any size etc incl existing roof treatement of any thickness complete all as specified and directed.

Demolition of mud in roof of any thickness and any position and leaping over roof terrace, removing the demolished material to a distance exc 250m and n.exc 500m and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on roof / concrete surfaces reinforced with chicken wiremesh of galvanised steel wire of 1.2mm dia and mesh size 12mm mixed with WPC @ 3% by the weight of cement used and finished even and smooth w/o using extra cement with leak proof testing complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only water proofing compound powder complete all as specified and directed.

M&L for preparing CC / RCC roof surfaces and providing 10mm thick modified plaster in CM 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than or equal to 105 with consumption of 0.61 Kg/Sqm (each coat) 2nd coat should be applied once 1st coat became dry complete all as specified and directed. Make : Asian paints / Thermax or equivalent make as approved.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone agg as in floor finished without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal complete all as specified and as directed.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square / rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 600 x 300 x 7-8mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square / rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for 18mm thick granite stone slab topping table rubbed and polished (one piece) in cooking platforms laid over 10mm thick cement screed bed or bedding layer in CM (1:4) including pointing in white cement (1:2) using marble dust including rounded / half rounded edge and hole of gas pipe in pre-cast slab as well as stone slab in cooking platform including demolition of existing broken damaged stone slabs complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste chain and plug complete fixed complete all as specified and directed.

S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm waste fitting, brass, chromium plated for basins, etc with long screwed shanks and fly nuts, glange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F Low density poly ethylene (LDPE) pipe 32mm dia of pressure rating 6kgf/Sqcm complete all as specified and directed.

S&F in repair stop cock angle type cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) 15mm bore fixed complete all as specified and directed.

S&F PVC connection best quality of length 600mm, with PTMT nuts complete all as specified and directed.

S&F in repair brass chromium plated shower rose with or without swivel joint 75 mm size complete all as specified and directed.

S&F in repair 15mm bore stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair bib taps 15mm bore chromium plated cast copper alloy with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed.

S&F vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side pre-laminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, PVC sheet reinforced with MS square tubes, S&F in opening as per specification & drawing given in SSR Part-II 2010.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with moulded plain colour PVC ‘C’ channel having PVC sheet strip 20mm wide struck inside with solvent cement for stiles and PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top and bottom rail Paneling of plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specification and drawing of SSR Part-I complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S&F for 150mm long Extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and riveted, framed guard bars and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F powder coated aluminium frame (minimum thikness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with aluminium beading in each pane complete all as specified and directed.

S&F 75mm long powder coated Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutter, side hung type without seat bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets angle iron 50x50x6mm with suitable length and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking up or down steel water tubing and connection of 15mm bore complete all as specified and directed.

S&F GI tubing 15mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade complete all as specified and directed.

Taking up or down steel water tubing and connection of 20mm bore complete all as specified and directed.

S&F GI tubing 20mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade complete all as specified and directed.

Taking up or down steel water tubing and connection of 25mm bore complete all as specified and directed.

S&F GI tubing 25mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed, including fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm PVC (SWR) pipes single socketed, including fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed, including fittings in any length with rubber ring joints fixed to wall including necessary clamp etc complete all as specified and directed.

S&F in repair 75mm PVC (SWR) pipes single socketed, including fittings in any length with rubber ring joints fixed to wall including necessary clamp etc complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110mm bore SWR junction, single T equal or unequal with oval access door complete all as specified and directed.

S&F in repair 75mm bore SWR junction, single T equal or unequal with oval access door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm CI floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L PVC water tank ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 ltr including dismantling of tanks complete all as specified and directed.

S&F in repair Viterous China bowl urinal flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe complete all as specified and directed.

S&F aluminium anodised tubular towel rail 20mm dia 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repair vitreous china white soap dish approximate size 160 x 160 x 90mm complete all as specified and directed.

M&L Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for providing cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate as in benching / coping and the like incl weathering slightly round or chamfered angles and throating complete all as specified and directed.

S&F in repair gun metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipes and fixed for 20mm bore of pipes complete all as specified and directed.

M&L for preparation of old surface of wall and applying two coats of white wash complete all as specified and directed.

M&L Prepration of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Taking down cement or lime plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:6) on brick walls / concrete surfaces other than fair faces of brick complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling surfaces complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work of external surface mixing integral water proofing compound @ 3% by wt of cement or as per manufacturer's instructions complete all as specified and directed. Note : Integral WPC shall be measured and paid separately under relevant items of BOQ (Schedule 'A')

M&L for two coats of cement base paint including preparation of new wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over and including a coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and directed.

M&L brick work with Fly ash bricks straight or curved on plan to any radius half brick wall, built in CM (1:4) complete all as specified and directed.

M&L brick work with Fly ash bricks straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

- ditto - but except bricks (bricks retrieved from item No 70 shall be used)

M&L Preparation of old plastered surfaces of wall such as cleaning of all dirt, dust, mortar drops, efflorescence, chalking, grease and other foreign matter and applying one coat of white wash with flat lime (Class 'C') or magnesium / siliceous dolonitic lime (Class 'D' or 'F') complete all as specified and directed.

M&L Preparation of old plastered surfaces of ceiling such as cleaning of all dirt, dust, mortar drops, efflorescence, chalking, grease and other foreign matter and applying one coat of white wash with flat lime (Class 'C') or magnesium / siliceous dolonitic lime (Class 'D' or 'F') complete all as specified and directed.

M&L for complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper over a coat of wall care putty not less than 1mm thick on wall complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old wooden surface of any description not otherwise described, exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old steel surfaces of any description not otherwise described, exc 10cm width or girth and applying two coats of synthetic enamel paints complete all as specified & directed.

Taking down carefully surface aluminium point wiring with wooden battens / PVC conduit (light, fan, socket, bell or power) including fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators etc and making good disturbed surfaces complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Taking down carefully aluminium submain wiring with wooden batten / PVC conduit and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories including cast iron/ Pressed steel terminal boxes 60mm deep for mounting switches, sockets, fan regulators etc with 3mm thick bakelite sheet top cover surface complete for the following :-

One light / fan / bell point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories, with earth continuty conductor with FRLS PVC insulated multistranded copper conductor cable 2.5 Sqmm complete for one 3 pin 15 Amps switch socket combination controlled by one switch on independent board and making the good disturbed surface complete.

S&F switch piano flush type 230/250 volts grade on top covers (catered in point wiring above) for :-

Single pole one way, flush type 5/6 Amp rating

Single pole one way, flush type 16 Amp rating

S&F socket outlet multipurpose type shutterd and interlocking flush type 230/250 volts grade for:-

Socket outlet 2 in 1, 6 Pin, 5 & 15 Amp Flush type

Socket outlet 2 in 1, 3 Pin 5 Amp and 2 pin 5 Amp

S&F lamp holder insulated body with back plate suitable for batten fitting including LED lamp 15 watt 3 star rating and connecting up complete all as specified and directed.

M&L renewal of UNSV submain wiring with 2 runs of single core 6sqmm PVC insulated unsheathed multistranded 1100 volts grade with FRLS copper conductor drawn through and including ISI marks PVC conduit concealed and conduit accessories of medium grade not less than 25mm dia including one run of single core 6 sqmm FRLS PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth conductor along with wiring and connected from DB to DB/main board complete all as specified and directed. Note :- Two run of 6 Sqmm cable and one run of 6 Sqmm earth cable and one run of 25mm PVC conduit shall be considered as a unit for measurements purpose.

S&F ceiling rose of 65x25mm PVC / polycarbonate three terminal surface bakelite complete all as specified and directed.

S&F powder coated CRCA steel sheet MCB distribution board (minimum thickness 1.2 & constructed as per IS 8623) degree of protection IP-43 - IK 09 with acrylic door recess mounted for having insulated 200 Amp rated tinned copper bus bar, earth bar, din bar detachable gland plate, interconnection, earthing connection blanking plates in unused spaces complete all as specified and directed for following ratings & ways :-

TPN DB, double door, 415 volts, 4 ways, 200 Amps capacity

SPN DB, double door, 240 volts, 8 ways, 200 Amps capacity

M&L for MCB SP 240 volts, 6-32 Amps, 10KA, C-Series complete all as specified and directed.

M&L for MCB SPN 240 volts, 20 to 40 Amps, 10KA, 'C'-Series complete all as specified and directed.

M&L for MCB TPN 415 volts, 40 to 63 Amps, 10KA, 'C'-Series complete all as specified and directed.

Note for MCBs & MCB DBs : MCBs & MCB DBs shall be of the same make. MCB DBs shall be fixed on wall in flush pattern by cutting the wall and making good disturbed surfaces.

S&F integrated type LED tube light fitting, indoor decorative aluminium extruded T-5, LED batten integrated type white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size complete all as specified and directed. Make - Cat Part No LTTB4F20WLED/W of C&S or equivalent make as specified in Appendix 'B'.

M&L for repair, rewinding and painting for ceiling fan electric driven, single phase, including refixing arrangement complete all as specified and directed.

S&F Building security light 25 watt LED, new generation, energy saving and environment friendly long life street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 fixed with 40mm dia 1.5m long bracket complete all as specified and directed. Make - Cat Part No. ENDURAPEARLSL25WLED757SASYTOPC of Havells or equivalent make as specified in Appendix 'B'.

S&F exhaust fans 300mm AC single phase 230/240V with louver and all connected assessories complete all as specified and directed.

Taking down service connection cable of any size and description complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire, armoured heavy duty electric power cable with aluminium conductor, 1100 volt grade, cross sectional area of size 25 sqmm 4 core laid in trenches wall / floor etc complete all as specified and as directed. Note : Cable may be laid in trenches, under road, across the nallah, along poles / walls and ducts etc. Excavation, earthwork, sand chshioning, cable cover, pipe for cable protection to be measured and paid saprately.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of cable and getting out complete all as specified and directed.

M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.

M&L for brick covering to underground electric cable using sub class "B" old size brick laid dry flat per pendicular to the direction of cable complete all as specified and directed.

Removing excavated soil/material to a distance not.exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

S&F in renewal of GI pipe light grade 40mm bore laid in trenches / alongwith pole / wall etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways, PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work, disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

S&F hum free electronic ceiling fan step regulator 120 to 180 volt, 100 watt capacity (socket type) including necessary connection complete all as specified and directed.

CHOPRA ENTERPRISES

Ms Kamal Kant Agarwal

M/S YATENDRA SINGH

M/s Hoti Lal Contractor

M/s Singh Engineering Corporation

M/S PREETI CONSTRUCTION