SPL REPAIR TO BOUNDARY WALL AT VARIOUS UNIT AT AKHNOOR MIL STN UNDER GE (N) AKHNOOR

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified.

Description all as per item No.02 above, but except bricks, all as specified and directed.

Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15mm thick in cement mortar (1:4) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground, complete all as specified. Notes : - This item shall also include the demolition of foundation concrete/hard core and taking out the posts and struts carefully and removing the same from site as directed.

Mild steel work as in posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. fixed and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Description all as per item Ser No 07 above but fixing only.

PCC 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in coping, benching, plinth band, bed block, PCC blocks for hold fast including rounded or chamfered angle as directed including necessary form work etc., complete all as specified and directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, (each line wire to be measured) fixed in repair complete all as specified

Restraining and resecuring of old loose Galvanised steel barbed wire any type and fixing to any type of standard rails straining bolts, including, securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, (each line wire to be measured), complete all as specified.

Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified.

Preparation of old plastered or un plastered wall surfaces including washing,scrubbing down and stopping of painted surfaces and applying one coat of cement base paint, complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.

Concertina coil 600mm dia / 56 loops / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg per RM (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 10-12 mtrs, Type of clip: Hardened Steelin Galvanised steel, complete all as specified & directed. Note: Measurement of concertina coil during payment shall be done as per "Weight ascertained by BOO convened by GE".

Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specfied.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed.

Form work to sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs etc and similar works rough finished complete all as specified.

RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in foundation, beam, plinth beam etc, complete all as specified.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified.

M/S SIKANDER KUMAR SHARMA

harish kumar and co

M/S KARAN SINGH CONTRACTOR

Ankush Gupta

M/s Rajesh Kumar Contractor

bushan kumar

NISHANT SHARMA