Construction of Mushroom Room and Fabrication of trolley and Jharna at RRC on Mushroom, at Murthal

Amount

Earth work in excavation in foundations, trenches, etc. in all kind of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR/6.6)

Cement concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth. (HSR/10.28)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness ( straight and curved) beams, girders, stairs, columns, ( square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position complete in all respects. (HSR/ 10.86+10.95a)

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. (HSR/10.114)

First class brick work laid in cement sand mortar 1:6 in foundation and plinth. (HSR/11.2)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (HSR/11.7)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HRS/14.1)

Kotah stone flooring 25mm thick in any pattern as specified over 12mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone. (HSR/14.62)

Kotah stone 20mm thick in skirting risers of steps, dados pillars and wall facing (lining) in any pattern as specified 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for mixing cramps, dowels and pins etc. (HSR/14.66)

12mm thick cement plaster 1:5 (HSR/15.6)

15mm thick cement plaster 1:5 on the rough side of single or half brick wall. (HSR/15.11)

Colour washing Two coats (HSR/16.50)

Finishing walls with exterior decorative cement based paints such as smowcem Robbiaceem etc. on new work, two coats to give an even shade. (HSR/16.61)

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in (HSR/18.1) a) R.S. Joists b) Flats c) Tees, angles and channels

Wrought iron and mild steel (using angles, flats, square bars, tee and channels) ladders grills, grating frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR/ 18.12)

Fe 500 EQR TMT steel bars for R.C.C. work, where not including in the complete rate of R.C.C. including bending binding and placing in position complete. (HSR/18.22)

Providing & fixing stainless steel ( Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab woth suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.) (DSR/10.28)

Providing & fixing of composite factory made dis-continuous prefabricated sandwich panel-LP/HP-80mm thick PUF for wall comprising of two sides facing of colour coated Galvanised steel sheet and sandwiched between them CFC free close cell high Density rigid polyurethane foam 40+-2 Kg/m3 having a thermal conductivity value of 0.023 w/mk. The outer & inner sheet shall ne off white RAL9002 galvanised steel sheet of 0.5mm TCT steel min, 240 Mpa having a coating Mass of min. 120 gsm zinc coating total of both sides as per IS:277 and finished with 20 microns colour coating of SMP polyester quality paint coat over a 5 micron primer on exposed side and back coat of 5 microns on inner side over a 5 microns primer. The outer and inner sheet shall have a core of 50 mm thick polyurethane foam insulation. The PUF insulation shall have fire retardant and self-extinguishing properties as per IS 12436. The panels should be of required length and in 1190mm width with tongue and groove arrangement on the sides having hidden fastener jointing arrangement. The prefabricated panels shall be fixed to the support structure. The metal sheet shall conform to IS: 277 & 14246. The polyurethane insulation shall conform to IS: 12436. The work shall be carried out as per directed of E.I.C. (NS)

Providing & fixing of composite factory made dis-continous line prefabricated sandwich LP/HP-PUF 50/80mm roofing panel comprising of two sides facing of colour coated galvanized steel sheet and sandwiched between them CFC free close cell high density rigid Polyurethane(PUF) foam insulation of 40+-2 Kg/m3, having a thermal conductivity value of 0.023 w/mk. The top & bottom sheet shall be off white RAL9002 galvanised steel sheet of 0.5mm TCT steel min.240 Mpa having a coating Mass of min.120 gsm zinc coating total of both sides as per IS: 277 and finished with 20 microns on inner coating of SMP polyester quality paint coat over a 5 micron primer on exposed side and back coat of 5 microns on inner side over a 5 microns primer. The top sheet shall have profile depth of 41-44 mm at a pitch distance of 300-333mm. The inner sheet shall be in the foam of a liner tray. The outer profile sheet and the inner liner tray shall have core of 50 mm thick Polyurethane(PUF) foam insulation. The PUF insulation shall have fire retardant and self-extinguishing properties as per IS 12436. The panels should be of required length and 1 Mtr in width. The prefabricated panels shall be fixed through the profiles directly to the purlins using self-drilling fasteners with neoprene washers mechanically with the help of machines. The metal sheet shall conform to IS: 513, AS: 1397 & 2728. The Polyurethane foam (PUF) insulation shall conform to IS: 12436. (NS).

Earth-Filling under floor with sandy soil of any lead. (NS)

Providing & fixing white toughened nylon wheels for stainless trolley & Jharna of 6” dia complete in all respect. (NS)

INTERSTATE ENTERPRISES

INDIVM ENERGY PRIVATE LIMITED