SPL REPAIR OF ELECTRIC WIRING IN 23 X STORAGE SHEDS AND PROVN OF 06 GEYSERS OF GE 574 ENGR PARK UNDER GE(WEST)PATHANKOT

Amount

M&L for sheet steel/CI terminal box of 4 inch X 7 inch size having thickness not less than 2mm including 3mm thick hylem/masonite sheet duly cutted for fixing of switches including fixing of terminal box with iron sheet duly clamped with iron clamps complete all as specified and as directed Note:- Cost of hylem/masonite sheet cutting and fixing of switches included in the quoted rate

M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existing surface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement MCB SP 240 volts any rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement MCB SPN 240 volts any rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x1.5 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 1.5 sqmm (green colour) as earthing lead connecting to common earthing dolly, drawn in and including rigid PVC concealed conduit of suitable size having thickness not less than 1.8mm(ISI marked) with and including all accessories complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. Note:- Two run of submain wire(phase and neutral) and one run of earth including PVC conduit and accessories will be measured as one run.

S&F energy saving 120W highbay LED light with PDC aluminium housing with PC lens cover and mounting eye bolt with IP-65 protection, ceiling (surface/suspended) mounting with system efficacy upto 110 Lm/W complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 2 core complete all as specified

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified (Note:-Punned thickness shall be measured and paid)

M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge.

Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F GI tubing light grade 40 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed.

Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed.

M&L for sub Main Wiring with two Run of single core PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x4 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 4 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed rigid conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. Note:-Two run of submain wire (phase and neutral) and one run of earth wire including PVC conduit and accessories will be measured as one run.

M&L for GI tubing medium grade 15mm bore on floor/wall including fittings complete including all necessary fittings to hold the pipe along the wall like hook, bolts, etc complete all as specified and as directed.

S&F fancy type CP stop cock/angle valve heavy duty cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed

S&F 15mm dia fancy type CP Bib taps heavy duty, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 20 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the existing MCB DB including connection with suitable size of copper thimbles complete all as specified and as directed.

S&F 5A/16A, 5 in 1 switch socket combination including flushing in wall MS terminal sunken box of adequate size having thickness not less than 1.2mm and hylam sheet 3mm thick fixed with brass screw and washers including making good the disturbed surface complete all as specified and as directed.

M&L for cutting including screwing existing steel tubing for alteration or addition including tee/nipple upto 25-32mm dia complete all as specified and as directed.

S&F kitchen wall mounted sink mixer with swivel cast spout of size 15mm dia polished bright cast copper alloy chromium plated complete all as specified and as directed. Make:- JAQUAR/PRAYAG/PLAYER/SILVERSHINE

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 78,112.00 and any other reduction if any from quoted amount.

satpal and brothers (BID ID -3259097)

dadwal engineers (BID ID -3263067)

JK ENTERPRISES (BID ID -3262071)