8326 SPECIAL REPAIRS TO INTERNAL WIRING BY REPLACING ALUMINIUM CONDUCTOR TO COPPER CONDUCTOR AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Taking down cement plaster on brick or stone wall as in jambs & cills etc incl raking out, hacking for key, joints scrubbing down with water complete all as specified and directed.

Material and labour for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 3mm thick wall care putty complete all as specified and directed.

Material and labour for newly plastered surfaces of wall by vacuum based sanding machine and removal of nails etc. and filling cracks /hole with putty and applying Two coats or more of 100% premium acrylic emulsion exterior paint having VOC less than 50gm/litre and UV resistance as per IS:15489:2004, having alkali and fungal resistance, dirt resistance, of required shade (company depot tinted) with silicon additives @1.43 litre exterior grade on external surface over a coat of exterior primer applied @ 0.90 litre/10 Sqm by auto roller complete all as specified and directed as per manufacture's instruction..

Material and labour for complete removal of existing treatment and applying 2 mm thick finished texture mortar in 1:2 (mix one part of white cement and two parts of dhoplur quartz powder of 1 to 2 mm grading ) including Texture finish shall be achieved to with the help of hand driven machine over that applying two coats of plastic emulsion paint over a coat of primer on wall surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying Two coats or more of 100% premium acrylic emulsion exterior paint having VOC less than 50gm/litre and UV resistance as per IS:15489:2004, having alkali and fungal resistance, dirt resistance, of required shade (company depot tinted) with silicon additives @1.43 litre exterior grade on external surface over a coat of exterior primer applied @ 0.90 litre/10 Sqm by auto roller complete all as specified and directed as per manufacture's instruction..

Material and labour for complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of old plastered surfaces & applying two coat of white wash on ceilings complete all as specified and as directed..

Material and labour for preparation of old plastered surfaces & applying two coat of white wash on walls complete all as specified and as directed..

Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc.

Point wiring with two single core 1100 V grade FRLS insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLS drawn through and including rigid PVC conduit and conduit accessories including concealed wiring including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLS multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/fan/ Bell point etc.

(a) One 3 pin 5 Amps switch socket combination, independent board with other switches, with cables 1.5 Sqmm size.

(b) One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per item No 12 but drawn through existing PVC conduit and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLS multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell point etc.

(a) One 3 pin 5 Amps switch socket combination, independent board with other switches, with cables 1.5 Sqmm size.

(b) One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per Item No. 12 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable concealed and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

All as per Item No. 12 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable existing conduit and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fixing modular socket 6A / 16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fixing modular fan step regulator 120W - 2 module complete all as specified and as directed.

Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed. Make: Indo Asian Cat No. 811889 or equivalent as mentioned in Ps

Supply and Fix in repairs Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures Vertical TPN DB 8 way suitable for MCCB incomer 100Amp, double door, TPN, AC 415 Volts complete all as specified and directed.

Material and labour for MCB SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SP MCB, complete all as specified .

Material and labour for MCB TPN enclosure with Three pin and earth plug and socket with 415 volts 32 Amp TPN MCB, complete all as specified .

Supply and fixing MCCB TP/FP, 100 Amps 415 Volts, 16 KA, 50 Hz, AC with fixed overload and fixed short circuit rating, suitable for fixing on VTPN MCB DB as incomer complete all as specified. Make: Indo Asian Cat No. 830008 or equivalent as mentioned in PS

Supply and Fix in repairs MCB TPN, AC 415 Volts 40/63 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SPN, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz 'C' curve 10KA, 50Hz 'C' curve complete all as specified and directed.

Taking down carefully sub main wiring of any description including batten / PVC conduit pipe on surface and making good disturbed surfaces to match existing all as specified and as directed.

Material and labour sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 6 Sq mm multi stranded copper conductor FRLSH drawn through and incl. non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire FRLSH earth continuity conductor etc including taking down old sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Three runs of 6 sqmm cable with one run of PVC conduit shall be measured as one run for payment.

Material and labour sub main wiring with three single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 10.0 Sq mm multi stranded copper conductor FRLSH drawn through non metallic PVC rigid conduit and conduit accessories concealed on walls/roof/floors/ceiling etc with earth wire of two run of 10.0 sqmm copper wire FRLSH earth continuity conductor etc. complete all as specified and directed by Engr-in-Charge. Note : Three runs of 10.0 sqmm and two run of 10.0 sqmm cable and one run of PVC conduit shall be measured as one run for payment purpose.

Supply and fixing wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with PVC block and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.

Supply and fix in repairs LED mirror light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED Security light fitting 25 W LED (Smart Bright Essential) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed.

Supply and fixing Recess mounting flat panel 33 Watt LED fitting 2x2 feet with flat panel to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing flat panel 36 Watt LED fitting surface/suspended fixing with all necessary fitting arrangements, suspended 60mm/ 75mm width aluminium extruded linear lighting luminaries with superior white powder coated finish, electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Deep Recess mounting round light fitting with low glare and high quality faceted reflector for superior lighting and aesthetics, 3000K fixed on false ceiling 3/6 Watt 50mm dia LED fitting dimmable type with suitable driver, control with step type regulator including removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Strip light with warm White(3000K) 28W, 240V, 50Hz with IP 20, 48 LED per Mtr of length 5 mtr each including suitable driver Complete all as directed by Engineer-in-charge.

Supply and fixing Deep Recess mounting round light fitting with low glare and high quality faceted reflector for superior lighting and aesthetics, 3000K fixed on false ceiling 9 Watt, 63mm dia LED fitting with suitable driver, including removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Deep Recess mounting round light fitting with low glare and high quality faceted reflector for superior lighting and aesthetics, 3000K fixed on false ceiling 3/6 Watt, 50mm dia LED fitting with suitable driver, including removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Recess mounting round type flat panel 10 Watt, 100mm dia LED fitting with to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Landscape Lighting type Town glow post top 28 Watt, IP 66/IK10 LED fitting with to enhance the, white powder coated CRCA housing complete with symmetric light distribution & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

S& F City cube Bollard D type Town glow post top 9 Watt, IP-65/IK-10 LED fitting with to enhance the, white powder coated CRCA housing complete install with base plate & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fix ceiling fan 1200 mm sweep 220V, 5 star rated, BLDC fan without remote including suitable fixing arrangement all as specified and directed. ( NOTE: Old Ceiling fan to be deposited after taking down to MES store.)

Material and labour for Wall Mounting fan, heavy duty 4500mm sweep, 230 Volt, 50 Hz, with shutters and louvers, complete all as specified and directed by Engr-in-Charge.

Supply and fixing Exhaust fan, heavy duty 300mm sweep, 230 Volt, 50 Hz, with shutters and louvers, including taking down old existing, complete all as specified and directed by Engr-in-Charge. ( NOTE: Old Exhaust fan to be deposited after taking down to MES store.)

Supply and fixing for Exhaust fan, heavy duty 450mm sweep, 230 Volt, 50 Hz, with shutters and louvers, including taking down old exisiting,complete all as specified and directed by Engr-in-Charge. ( NOTE: Old Exhaust fan to be deposited after taking down to MES store.)

Material and labour for cutting and breaking to required size of wall for mounting exhaust fan and making good with cement motor plaster and painting to disturbed surfaces as per existing finish complete as specified and directed.

Taking down carefully Light fitting any type for reuse at same place including keeping in safe custody upto refixing, including refixing light fitting in same position complete connecting from ceiling rose to fitting with 2 core copper flexible cable/conductor all as per specified and directed by Engr-in-Charge.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing after greasing and cleaning and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Material and labour for earthing complete with copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 25 mm dia GI pipe medium grade for protection of copper earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade of following sizes:- Note:Earthwork,excavation and cable protection shall be measured and paid for separately.

(a) 70 Sqmm 3.5 Core

(b) 35 Sqmm 3.5 Core

(c) 25 Sqmm 4 Core

(d) 16 Sqmm 4 Core

(e) 10 Sqmm 4 Core

Supply installation, commissioning and testing of factory made out door LT distribution panel board cubical type Pedestal mounted CPRI approved fabricated out door of MS 3.15 mm thick and angle iron 50mm x 50mm x 6mm frame complete with copper bus bar 4 wire 3 phase 400Amps capacity mounted on porcelain insulator suitably spaced in totally enclosed chamber size of PVC insulated and sheathed copper cable complete including powder coated painting both internally and externally with two coats of synthetic enamel grey paint over a coat of red oxide primer comprising of the following:-

(a) MCCB 4 Pole 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. As I/coming (01 Nos)

(b) MCCB 4 Pole 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. As O/going (03 Nos)

(c) MCCB 4 Pole 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. As O/going (04 Nos)

(d) MCB 4 Pole 32 Amp, 50 Hz, 415 V with rupturing capacity 10 KA. As O/going (02 Nos)

(e) Changeover Switch 63 Amps with open Execution (01 No)

(f) Digital Time Switches DIN Type Daily, 24 hrs(01 No)

(g) 3 Pole power Contactor MNX Type 32 Amp(01 No)

(h)Space for Fixing Energy Meter 3Phase (01No)

(j) LED Indicating lamp RYB - Set of 3.-01 Nos

(k) LED Multifunction meter with CT - 01 No

Excavation in trenches not exc. 1.5 m wide and not exc.1.5 m deep for laying of cable, pipe and for erecting of steel tubular swaged pole etc, and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting points in soil all as directed by Engineer-in-Charge complete all as specified and directed.

Supply, spreading and compacting of approved riddled earth in cable ducts / trenches for cable cushion on both top and bottom of cable, including ramming as specified and directed by Engineer-in-Charge. (Note :- Punned thickness only will be measured)

Supply and lay burnt bricks for cable protection of sub class 'B' standard size in trenches all as specified.

Supply and laying of 50 mm steel tubing galvanised Medium grade complete all as specified and directed by Engr-in-Charge.

Supply and laying of 80 mm steel tubing galvanised light grade complete all as specified and directed by Engr-in-Charge.

Supply and laying of 50 mm steel tubing galvanised light grade complete all as specified and directed by Engr-in-Charge.

Supply and laying of 25 mm steel tubing galvanised light grade complete all as specified and directed by Engr-in-Charge.

Supply and fix cable junction box IP 66 weather proof for outdoor with cable glands for cable entry for 4-10 sqmm of box size 130x180x77 mm with suitable terminals all as specified and directed. Make Hensel Cat No KF 1010G or equivalent.

Supply and Fix out door type, pedestal/ wall mounted, factory made, TPN bus bar box, made up of CRCA sheet of as per manufacturers specification including copper bus bar of 100 Amp, 3 phase, 4 wire system, step type designed bus bar including cable gland for outgoing and incoming cable, complete all as specified and directed by Engr-in-Charge.

AnnaiEnterprises

S KUMARAN

VVM CONSTRUCTIONS

SIRITEL SYSTEMS PRIVATE LIMITED

CHANDRASEKRAN ENTERPRISES

MURUKAN BUILDERS

THIRUMURUGAN ENTERPRISES