Gram Panchayat Kotwa Sidhariya sthan ke paas samudayik bhavan ka nirmaan karya.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (D.S.R 2.8.1)

Providing and laying in position specified grade of 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). (D.S.R 4.1.8)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.1.2)

Same as above in item No 3 but for Slabs and Cantilever slabs as per Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (D.S.R.5.3)

Same as above in item No 3 but for Column as per 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.2.2)

Providing and laying in position specified grade of Thermo-Mechanically Treated bars of grade Fe-500D or more. (D.S.R.5.22.6)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.6.1.2)

Same as above in item No 10 but in super structure for wall of one brick thickness Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level. Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.6.4.2)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)(D.S.R.6.13.2)

12 mm thick plaster with 1:6 cement and coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of all materials labour and T&P etc. required for proper completion of work. (D.S.R.13.4.2)

Same as above in item No 10 but for plaster on rough face .(D.S.R.13.5.2)

Steel work In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete(D.S.R.10.25.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (D.S.R.9.21)

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.9.21.1)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.(D.S.R.2.25)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(D.S.R.2.27)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm As per (D.S.R 11.41.2)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (D.S.R.13.47.1)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (D.S.R.13.41.1)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R.13.48.2)

Supply and fixing of sign board including supply and cost of all material, labour T&P required templet as directed by the Engineer Incharge.

ELECTRICAL WORK

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.( DSR 1.3.3)

Group C ( D.S.R. 1.10.3)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Power plug wiring in PVC cunduct (4x4 sqmm ) DSR NO.1.12

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (DSR 1.14.1)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DSR 1.14.2)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. As requird

5/6 A Switch DSR NO.1.24.1

15/16 A Switch DSR NO.1.24.3

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate and switch box including connections but excluding modular plate est. As required DSR NO.1.25

Supplying and fixing of following ways surface/ recess mounting vertical type 415 V , TPN MCB distribution board of sheet steel, dust protected , duly powder painted inclusive of 200 A Tinned copper bus bar for mounting MCBS (BUT WITHOUT MCBs and incorner) As required. (Note:- Vertical type MCB TPND is normaly use-1 where 3 phase outlets are required )

4 Way (4+12), Double door DSR NO.2.5.1

Supply, Installation, Testing and Cornmissioning of 1200 mm sweep, BEE 5 star rated, ceilling fan withBrush Less Direct Current (BLDC) Motor, class of insulation :b, 3 nos blades, 30 cm long down rod, 2 nos canopies shackle kit safety rope copper winding, Power Factor not less than 0.9, Service Value (cm/m/w) minimum 5.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS:374-2019) THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories inclunding safety pin, nut-bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply , earthing etc complete as required DSR NO.19.1

SANITARY WORK

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(D.S.R.17.1.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

20 mm dia nominal bore(D.S.R.18.10.2)

25 mm dia nominal bore(D.S.R.18.10.3)

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

15 mm dia nominal bore(D.S.R.18.11.1)

Providing and Fixing UPVC slotted pipe 100 mm dia as per IS:12818 D.S.R No-7758

Providing and fixing brass stop cock of approved quality :

15 mm nominal bore(D.S.R.18.16.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore(D.S.R.18.49.1)

Please Enable Macros to View BoQ information