PROVN OF HARDSTANDING AT MT AREA OF COMP PL AND PROVN OF CERTAIN REVENUE WORKS AT DIFFERENT LOCATIONS OF ALONG MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Surface Dressing not exc. 15 Cm Deep and getting out in Soft/Loose soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) to a distance not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Sand (as approved) Filling under Floors or in Foundations including Watering and Consolidation in layers not exc. 15 Cm thick, complete all as specified and as directed.

M&L Sand Gravel (as approved) Filling under Floors or in Foundations including Watering and Consolidation in layers not exc. 15 Cm thick, complete all as specified and as directed.

M&L Polythene Flim 150 Micron, Black, laid in Floors, complete all as specified and as directed.

M&L Hardcore Broken Stone or Boulders, gauge not exc. 63mm, deposited, Spread and Levelled in layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork as ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 60 Cm in heights, Coping, Kneelers, Apex Stone Bed Plate, Kerbs, Water Trough, etc., weathering, slightly champhered angles and throating including Use and Waste of Formwork, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Chajja, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Formwork to Chullah Hoods, Chajjas, Troughs and Similar Items including Edges, etc, Rough Finished Surfaces of Concrete Flat, complete all as specified and as directed.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks in Cement Concrete 1:3:6 (20mm graded stone aggregate), 10 Cm Width/thick and setting in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use and Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and Blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick Plain Colour (Ivory Shade) PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core 28mm to 30mm thick (Stiles) with 2, 4 or 6 Raised Panel Design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, fitted in Frame at Site as per Specifications & Drawings, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 150mm long (as approved), Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 250mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 75mm in size (as approved), complete all as specified and as directed.

S&F Aluminium Handle 125mm (as approved), Cast type, anodised, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Sections in Main and Cross Beams, Hip & Jack Rafters, Purlins where connected to Common Rafters, Running Rails and Guides for Sliding Doors, conforming to Fe-410-W (Gde E-250), Quality 'A', fixed with Angle Cleats or Other Connecting Plates, complete all as specified and as directed.

M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed.

S&F Corrugated Mild Steel Sheeting 0.63mm thick, Galvanised @ 275 Gram Per Sqm, with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Flooring, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Levelling Course for laying of Tiles, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Glazed Ceramic Coloured Tiles 300x200x6.0mm-7.0mm thick (1st quality) in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Glazed Ceramic White Tiles 350x250x7.0mm or 450x350x7.0mm thick (1st quality) in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Machine Cut Marble (Makrana Doogri) Work, 18 to 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platform and like, fixing over Screed Bed 15mm thick in Cement Mortar 1:4 including Set in Neat Cement Slurry and Pointing in White Cement 1:2, using Marble Dust with Admixture of Pigment to match with Marble shade, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 150mm thick in Sub-base for Hardstanding, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (40mm graded stone aggregate) 100mm thick in Hardstanding, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Forming Contraction (Dummy Joint) 65mm Deep x 10mm Wide and filled with Sealing Compound Grade 'A', complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick on Brick/PCC Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:6 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid saperately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Connections/ Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Angle Stop Valve 15mm bore (dia) of PTMT (minimum Weight 90 Gram), any Colour, high pressure, screwed for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) 'P' or 'S' Trap and Fixing Bolts and Making Good to Floors and distrubed Surfaces in Cement Mortar 1:3, complete all as specified and as directed

S&F White Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.

S&F Prime Plus Single Piece Suit EWC 650x365x725mm, conforming to MAKE : PARRYWARE, Model No. C8918(S-220) or equivalent Model (as approved by GE) of Approved Make, complete all as specified and as directed.

S&F Chromium Plated Fancy type Health Faucet Cardiff with Stainless Steel Hose & Hook of Brass, conforming to MAKE : PARRYWARE, Model No. T9940A1 or equivalent Model (as approved by GE) of Approved Make, complete all as specified and as directed.

S&F Health Faucet 2-in-1 having Stainless Steel Hose of Length 1.50 Metre with Wall Hook, Brass Chromium Plated, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, and PVC Flush Pipe 32mm bore (dia), a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F Integrated N Urinal with Sensor, conforming to MAKE : PARRYWARE, Model No. C0587 Integrated AC with Poweer Source (White) or equivalent Model (as approved by GE) of Approved Make and fixing to Walls with Brass Chromium Plated Screws, complete all as specified and as directed.

S&F Vitreous China White Urinal, Half Stall type, (excluding Flushing Cistern, Flush Pipe and Waste Pipe), complete including providing and fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, fixing Urinal Spreder of Brass Chromium plated, Flush Pipe, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe), complete all as specified and as directed.

S&F Urinal Spreader (minimum Weight 60 Grams) of PTMT any Colour for fixing with 15mm dia Pipe, complete all as specified and as directed.

S&F Vallure Bowl Basin, Bright 410x365x185mm conforming to MAKE : PARRYWARE, Model No. C0462 or equivalent Model (as approved by GE) of Approved Make, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 550x400mm in size, Flat Back with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 600x480mm in size, Angle Back with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F Bottle Trap 32mm bore (dia), Brass Chromium Plated suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Union, Cap, etc., complete all as specified and as directed.

S&F Stainless Steel Soap Disc of Size not less than 125mm (as approved), fixed on Wooden/ PVC Cleats with Brass Chromoum Plated Screws, complete all as specified and as directed.

S&F Vitreous China White Toitet Paper Holder, Box type of Approved Size, fixed on Wooden/ PVC Cleats with Brass Chromoum Plated Screws, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts for WHB, etc., complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 600mm in length with PTMT Nuts for Low Level Flushing Cistern, complete all as specified and as directed.

S&F Glass Shelf Assembly (as approved) consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, fixed on Wooden/ PVC Cleats with Brass Chromoum Plated Screws, complete all as specified and as directed.

S&F Towel Rack conforming to MAKE : PARRYWARE, Model No. T6408A1 or equivalent Model (as approved by GE) of Approved Make, fixed to Wooden/ PVC Cleats with Brass Chromium Plated Screws, complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), complete all as specified and as directed.

M&L Cast Iron Floor Trap, Diameter of Outlet 75mm with Grating and jointing to Waste Pipe fixing in Cement Concrete type 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

M&L PVC (SWR) Floor Trap with Grating, Diameter of Outlet 75mm, Plain and jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors, complete all as specified and as directed.

S&F PVC (SWR) Pipe 110mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia) of any type, with Access Door and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl (as approved), Jointing with Solvent Cement, complete all as specified and as directed.

M&L Cutting into existing Manholes for Connecting PVC (SWR) Pipe 110mm bore (dia), Making Good to Pipe and Rendering, Cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Angle Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, complete all as specified and as directed.

S&F LED Bulb 10 Watt and fitted to existing Angle Holder in any Position, complete all as specified and as directed.

S&F LED Tube Light Fitting 1x20 Watt, Aluminum Extrution Housing with LED Strip 20 Watt, having Driver, Pre-wired, connecting up with and including suitable Length and size Twisted Flexible Copper Conductor Cable, 3 Core, complete all as specified and as directed.

S&F Exhaust Fan 250mm Sweep, PVC Body with Louver, 1400 RPM, Single Phase, 230 Volt AC, fixing with Mild Steel Bolts, Nuts, Washers, etc. and connecting up with and including suitable size Twisted Flexible Copper Conductor Cable 3 Core from Ceiling Rose to Fan, complete all as specified and as directed.

M&L Cutting Holes in Walls of suitable size to fixing Exhaust Fan and Making Good to Dismantled Portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required), complete all as specified and as directed.

S&F MCB Single Pole 6 Amp to 32 Amp, 'B' Series, 50 Hz, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 6 Amp to 32 Amp, 'B' Series, 50 Hz, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board Sheet Metal Enclosure SPN, 2-way, 240 Volt, Single Door, Painted with Epoxy Powder coated, suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-going, Complete with 200 Amp rated Bus-bar, Neutral Bars & Earth Bar, Connecting Cable Links with Top and Bottom Removable Gland Plate, IP-43 Protection and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board Sheet Metal Enclosure SPN, 4-way, 240 Volt, Double Door, Painted with Epoxy Powder coated, suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-going, Complete with 200 Amp rated Bus-bar, Neutral Bars & Earth Bar, Connecting Cable Links with Top and Bottom Removable Gland Plate, IP-43 Protection and connecting up, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing, complete all as specified and as directed.

Supply & Laying or Passing through Pipe 1100 Volt grade heavy duty, Cross-sectional area 6.0 Sqmm, 2 Core, Flat or Circular Cable with PVC insulated Aluminium Conductor served with an inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed in Service Connection suspended by insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire, complete all as specified and as directed.

Supply & Laying LT Under Ground Cable 1100 Volt grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi-stranded Aluminium Conductor all as per IS:7098 (Part-I)-1998, Cross-sectional Area 4.0 Sqmm, 2 Core, laid in Trenches, Ducts, Pipes or on Poles, etc, complete all as specified and as directed.

Supply & Laying HDPE Double Wall Corrugated (DWC) High Density Polythene Pipes of Outer Dia 40mm & Inner Dia 32mm, having corrugation on the Outer Wall and Plain surface on the Inner Wall, conforming to IS:14930 (Part I & II), cut to length as per Site Requirements for protection of UG Cable/ in PCC including cutting Floors, etc. and Making Good the Same with Original Specification to match the existing adjoining Surfaces, etc., complete all as specified and as directed. NOTE : Quoted Rate is inclussive of all Accessories for fixing of DWC Pipe with Walls, Roofs, Cable Tray, etc.

M/S Raju prasad

M/S A K BROTHERS