Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC 251A 56 N S C BOSE ROAD KOLKATA 700 047 | KOLKATA | KOLKATA | WEST BENGAL | 700047 | L1 | Accepted-AOC Being a lowest bidder and reasonable. | |
| 2 | L2₹50.4 L+₹2.2 L (4.63%)Rejected-Finance BHANGARMATH THAKURANICHAWK PO SAMABAYPALLY BALLY HOWRAH 711205 | HOWRAH | HOWRAH | WEST BENGAL | 711205 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.8 L+₹2.6 L (5.37%)Rejected-Finance 121004 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹50.9 L+₹2.7 L (5.56%)Rejected-Finance VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹51.2 L+₹3.0 L (6.30%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
20 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
COMPREHENSIVE REPAIR/ MAINT OF BLDG NO OD-1, SM-17, RA-1, COMD MANDIR, COMD GURUDWARA, COMD MUSEUM AND OTHER OTM BLDGS INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_651610_1
8244/E8
Open Tender
Civil Works
Item Rate
330 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹87,000
13 Jun 2024
30 Apr 2024
21 May 2024
30 Apr 2024
20 May 2024
13 May 2024
Amount
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
M & L for Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.
M&L for PCC Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)
M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
Demolition of brick work or stone boulder masonry built in cement mortar including all quaries, arches pillars etc and removing off the site.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings & removing off the site complete all as specified and directed.
Demolition of concrete Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Dismantling of loose concrete from RCC members to shape 50 mm for receiving polymer modified member/micro concrete etc all as per manufacturer instruction (Measurement shall be surface area of member).
M&L for Cleaning rust from rusted steel bar by using Rebaklens RR rust remover & wire brush : Rust remover cleaning rust from rusted reinforcement bars by using acid base Rebaklens RR rust remover painted with brush and removing rust with flex, (after 24 hrs of application of rust remover) with the help of wire brush, sand paper or any other suitable devices and thoroughly washed with water with the help of pressure jet and allowing it dry complete all as per manufacturer instruction of Make : Fosroc/Sikka. (only area of cleaned steel bar shall be measured for payment).
Anchoring system for rebaring by normal steel bar :- Rebaring by normal steel bars : introducing new reinforcement bars for structural connections in RCC, fixing the reinforcement in position using Hilti HY 150/ Fosroc Lockfix E 75 chemical (Rate shall include cost of labour, epoxy cartridges, plastic nozzles etc complete including cleaning the drilled holes of loose dust by blowing air, all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (The cost of reinforcement shall be payable separately).
M&L for Coating applications Anti Corrosive coating for corroded reinforcement & newly added steel bar :- Providing mixing and applying over reinforcement bars Nitozinc primer antirust agent all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka (Dosage/coverage as per manufacturer specification of two component epoxy based zinc rich primer steel as a protective coating to steel reinforcing bars in concrete with total zinc content in dry film > 90% by volume and DFT per coat>50 microns).
M&L for Bonding Agent :- Providing and applying bonding agent of approved brand Fosroc Nitobond EP (Std) coverage and all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (Mixed density : 1.48Kg/ltr, adhesive bond strength to be >2.50 MPs) epoxy bonding agent.
Polymer modified mortar Rendroc SP 40 for patch repair :- M&L polymer modified concrete upto 25 mm thick application Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, specifically of PMC (Free flowing non shrink repair and could get compressive strength of 35 Mpa at 28 days including plaster and all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed
M& L for brickwork with sub class 'B' fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M&L providing cement concrete type B1 1:2:4 (20 mm graded stone aggregate) using cills, steps, plinth course, string course, coping and other similar bands etc complete all as specified.
M&L for dubbing out cement plaster (1:4), average 10 mm thick on irregular faces of walls (when specially ordered in writing) complete all as a specified and as directed.
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:6, finished fair & even & smooth without using extra cement, all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work/ concrete on ceiling surfaces in CM 1:3, finished fair & even & smooth without using extra cement. Complete all as a specified and as directed.
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:4, using water proofing compound, finished fair & even & smooth without using extra cement. (WPC shall be measured and paid separately).
Supply only liquid water proofing compound all as specified and directed.
M&L for Mild steel framed works such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as a specified and as directed.
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-B complete all as a specified and as directed.
M&L welded steel wire fabric, weight n exc 4 kg per square meter complete , fixed to steel members, all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for cutting holes in brick wall exceeding half brick but not exc one brick thick walls for inserting hold fasts or pipes and making good dismantled portion in cement concrete 1:2:4 type B1 (using 20 mm graded aggregates) including necessary formwork and making good surfaces as per existing finishes complete all as specified and directed.
M&L for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet ,0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F in repairs 0.80mm thick plain galvanised mild steel sheeting, as in, hips, valley gutters, drip and straight flashings (length and girth as fixed) for hangars etc complete including dismantling existing sheets all as specified and directed.
M&L for heavy duty coloured ceramic floor / paving tiles of size 300 x300x 10 mm thick in floor etc set and jointed in near cement slurry and pointed in white or coloured cement to match the shade complete including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for providing 25 mm thick Plain Cement Concrete (1:2:4) type B0, using 12.5mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.
M&L for 18-20 mm thick granite slab of approved quality (table subbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specified as directed.
Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as directed.
M&L 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/paving etc., finished even and smooth without using extra cement as directed.
M & L for plain cement concrete (1:5:10) type E-2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M&L for providing two coat of master seal 550 or equivalent to prevent leakage/seepage through sunken floor over prepared surfaces complete all as specified and directed.
M&L for vitrified ceramic tiles (light shade) 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in colored cement to match over 15 mm thick screed bed of cement mortar 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in skirting etc set and joined in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing layer of cement mortar 1:3 complete all as specified and directed.
M&L Virified ceramic (Double charged) colored tiles dark shade 10mm thick (square/rectangular ) polished, area of each tiles exceeding 0.42 Sqm and but not exceeding 1.28 Sqm in floors etc set and jointed in neat cement slurry, laid over and including screed bed 15 mm thick in cement mortar 1:6 and pointed in white cement with pigment to match the surface complete all as specified and as directed.
M&L Virified ceramic (Double charged) colored tiles dark shade 10mm thick (square/rectangular ) polished, area of each tiles exceeding 0.36 Sqm and but not exceeding 0.42 Sqm in skirting on vertical surfaces etc set and joined in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing layer of cement mortar 1:3 complete all as specified and directed.
S&F non-skid 7 to 8 mm thick ceramic coloured digital tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm or 300 X 600 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick bedding in cement mortar 1:4 complete all as specified and directed.
Dismantling of 100mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.
Dismantling of 150mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge.
S&F 150 mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or floors complete all as specified and as directed by the Engineer-in-Charge.
S&F Cast Iron Branch Piece 100mm bore (dia) single (equal or unequal), ordinary or inverted (spigot or socket type) with Parallel Branches including Jointing with Cement Mortar 1:1, fixed complete all as specified and directed.
Supply and fixing 100mm dia CI bend (any radius), with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.
S&F Cast Iron Branch Piece 100mm bore (dia) single (equal or unequal), ordinary or inverted (spigot or socket type) with Parallel Branches fitted with Oval Access Door including Jointing with Cement Mortar 1:1, fixed complete all as specified and directed.
S&F CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.
S&F 100mm dia Cast iron sanitary connection socket to fit WC outlet complete all as as specified and directed.
S&F for cast iron floor trap/nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate ,100mm dia outlet complete all as specified.
S&F 150 mm bore CI (sand cast) bend any radius, diminishing pieces or tapers complete all as specified.
S&F 150 mm dia CI (sand cast) branch, with or without ears, complete all as specified.
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof of 100 mm dia of pipes.
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof of 150 mm dia of pipes.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.
M&L for GI tubing medium grade with all fittings and fixture complete to be fixed to walls and ceilings or laid in floors, duly clamped all as directed for 15 mm bore pipe.
M&L for GI tubing medium grade with all fittings and fixture complete to be fixed to walls and ceilings or laid in floors, duly clamped all as directed for 20 mm bore pipe complete all as specified and directed.
S&F 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and re-connecting and refixing all connections complete all as specified and directed.
Disconnecting exiting water storage Tank of capacity exceeding 1000 litres but not exceeding 2000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and re-connecting and refixing all connections complete all as specified and directed.
Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres and providing necessary connections including dismantling old tanks all as specified and as directed by the Engineer-in-Charge. (Make : Sintex / Rounaq / Polycon).
Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity exc 1000 litres but not exc 2000 litres and providing necessary connections including dismantling old tanks all as specified and as directed by the Engineer-in-Charge. (Make : Sintex / Rounaq / Polycon) or equivalent make as per tender documents.
S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm bore (Minimum weight 455 gms) complete all as specified and directed.
S&F vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK) or equivalent make as per tender documents.
S&F in repair Coloured (any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed. (Make : Parryware, Cat No: E8071/PRAYAG, Model : Standard or equivalent model in HINDWARE / CERA / COMMANDER) or equivalent make as per tender documents.
S&F Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ ASIAN PAINTS MODEL: SIRIUS) or equivalent make as per tender documents. (NOTE: Waste coupling and Waste pipe shall be included in quoted rate)
S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER)
S&F Vitreous china, white, full stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make: CERA, Model: CARYS/ HINDWARE, Model: CORTO / PARRYWARE, Model: Aquaseal N / ASIAN PAINTS, Model: UR-22-MS or equivalent model in CERA) or equivalent make as per tender documents.
S&F in repair 38/40 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 328 or equivalent make as approved by GE)
S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent make as per tender documents.)
S&F in repairs, 600mm x 600mm mirror with PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. (MAKE : PRAYAG, Cat No: 553 or or equivalent make as per tender documents.
S&F in repairs soap dish, chromium plated body complete all as specified and directed. (Make: PRAYAG, Cat No: BA-45 / CERA, Cat No: F5003106 / PARRYWARE, Cat No: T6902A1 / HINDWARE, Cat No: F880011) or equivalent make as per tender documents.
S&F toilet paper holder, surface type with flap holder complete all as specified and directed. (Make : JAQUAR, Cat No : AKP-35751P / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-18 / ESS ESS, Cat No: AC-106 / HINDWARE, Cat No: F880003 / PARRYWARE, Cat No: T6514A1) or equivalent make as per tender documents.
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 or equivalent make as per tender documents.
S&F 32 mm bore PVC corrugated waste pipe, 800 mm long for /wash hand basin/URINALS complete all as specified and directed. (Make: PRAYAG, Cat No. 327 or equivalent make as per tender documents.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete al as specified and directed. (Make: ESS ESS, Cat No: AC207 or equivalent make specified in particular specification) or equivalent make as per tender documents.
S&F in repairs chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : PARRYWARE, Cat No: T9961A1 or equivalent make as per tender documents.)
S&F stainless steel grating of size 102 mm dia with waste hole, complete all as specified and directed. (Make : PRAYAG, Cat No: FT-04 or equivalent make as per tender documents.)
S&F in repair 15mm bore chromium plated two way bib cock with flange fancy type complete all as specified and as directed. (Make : PARRYWARE, Cat No: G4834A1) or equivalent make as per tender documents.)
S&F wall mounted cascade NXT closet white (Cat No C0208), regular seat cover (E8299) , cistern set including dual flush fittings(C0771) with complete arrangement, of Make Parryware or equivalent in Jaquar/Hindware or equivalent make as per tender documents.
S&F in repair pillar taps fancy type chromium plated swan neck Cat No G4803A1 of Make Parryware or equivalent in equivalent in Jaquar/Hindware or equivalent in other makes specified in tender.
S&F in repair Bib taps with aerator fancy type chromium plated Cat No G4880A1 of Make Parryware or equivalent make as per tender documents.
S&F towel rack fancy type chromium plated Cat No T-6008A1 of Make Parryware or equivalent make as per tender documents.
S&F towel ring fancy type chromium plated Cat No T-6904A1 of Make Parryware or equivalent in other makes specified in tender
S&F in repair 15mm bore auto closing concealed urinal flush valve with wall flange, fancy type chromium plated Cat No PRS-073 of Make Jaquar or equivalent make as per tender documents.
S&F in repair regular or any connected pattern seat cover white or off white suitable of cascade closet floor or wall mounted with complete arrangement, of Make Parryware or equivalent in Jaquar.
M&L for preparing newly plastered of wall surfaces and applying Two Coats of oil bond distemper over a coat of alkali resistant primer over and including 3 mm thick exterior wall putty complete all as specified and as directed.
M&L for preparing newly plastered of ceiling surfaces and applying Two Coats of oil bond distemper over a coat of alkali resistant primer over and including 3 mm thick exterior wall putty complete all as specified and as directed.
M&L for preparation of new surfaces of walls and soffit of chajja roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom emery paper putty blade / scraper as applicable to make the surface free from protrutions, loose particles dust etc including necessary safety and protective measures such as safety belt, headgear etc, finishing the surface with 1mm thick exterior wall putty for smooth finish and finishing with two coat of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffoldign for upto 4 storey building height complete all as specified and directed.
M&L for mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish including supply of all consumables complete all as specified and directed.
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust and applying complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling including cleaning, watering to make the surface clean and free from dust and applying complete all as specified and directed.
M&L for preparation of old surfaces of walls and applying Two Coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall care putty all as specified and as directed.
M&L preparation of old surfaces of ceiling and applying Two Coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall care putty all as specified and as directed.
M&L for preparation and applying with textured paint of required shade (two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of interior or exterior primer applied @ 2.20 Kg/10 Sqm over 2 mm thick wall care putty on plastered surfaces, of Make-Asian/Nerolac/ Berger/ Dulax all as specified and directed.
M&L preparation of surfaces and pasting of wall paper of any design/ pattern/ shade, complete all as specified and approved by GE of Brand Nilaya of Make- Asian or equivalent in other approved makes of Nerolac/Berger.
M&L for preparation of old surfaces and applying two coats of plastic emulsion paint over a coat of primer after applying 1 mm thick wall care putty on walls, all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer after complete removal of old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, complete all as specified and as directed.
M & L for Preparation of old decorated surfaces of walls and applying one coats of white wash complete all as specified and directed.
M & L for Preparation of old decorated surfaces of ceiling and applying one coats of white wash complete all as specified and directed.
M&L for preparation of old treated surfaces of walls by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., and applying one coats of oil bound distemper finished with rollers complete all as specified and directed.
M&L for preparation of old treated surfaces of ceiling by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., and applying one coats of oil bound distemper finished with rollers complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.
M&L for preparation of old surfaces and applying one coat of plastic emulsion paint on walls, all as specified and directed.
M&L for applying one coat of french polishing on surfaces of any description , width or girth including cleaning and preparing the surfaces including a coat of wood filler on one or more coats on old work, all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer.
M&L for preparation of new steel and iron surfaces of any description, n.exc 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L preparing old surfaces of any description and applying one coat of synthetic enamel paint over brick, stone, concrete, asbestos cement surfaces or plastered surfaces complete all as directed.
M&L for applying one coat of cement base paint using brush to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crack fill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for uprooting of plants or vegetation growth from wall up to roof level, applying two coats of tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instruction and sealed with 85/25 grade hot blown bitumen and removal of debris outside MOD land and disposed off complete all as specified and directed by Engineer -in charge.
M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as directed by Engineer in Charge.
M&L for repair to chajja/projected portion, area exc 2 sqm but not exc 4 sqm each by removing all broken, loose materials and repairing with cement mortar 1:3 or PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) on top mixed with liquid WPC as per manufacturer's instruction including benching, haunching, repair to broken plaster with dubbing coat with cement mortar 1:4 including necessary formwork complete all as specified and directed.
M&L for repair to chajja/projected portion, area exc 1 sqm but not exc 2 sqm each by removing all broken, loose materials and repairing with cement mortar 1:3 or PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) on top mixed with liquid WPC as per manufacturer's instruction including benching, haunching, repair to broken plaster with dubbing coat with cement mortar 1:4 including necessary formwork complete all as specified and directed.
M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along wall using chemical emulsion one litre per hole at 300mm internvals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing, all as per manufacturer instruction etc complete all as specified and directed. (Note : The process shall be carried out Manufacturer rep only)
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
S&F stainless steel hinges of 100 mm size, Cat No HG2414 of Make Prayag or equivalent make as per tender documents.
S&F in repairs 150mm extruded brass handles, fabricated type polished, complete all as specified and directed.
S&F in repairs 300mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts polished, complete all as specified and directed.
S&F in repairs brass barrel tower bolt with cast or sheet barrel and rolled or cast bolts of size 200mm, polished complete all as specified.
S&F stainless steel handle of size 200mm, Cat No DHL2200 of Make Prayag or equivalent model in other approved makes as specified tender.
S&F stainless steel tower bolt of size 200mm, Cat No TBR 2200 of Make Prayag or equivalent model in other approved makes as specified tender.
S&F stainless steel Aldrop bolt of size 300mm, Cat No LD 1212 of Make Prayag or equivalent model in other approved makes as specified tender.
Taking down aluminum frame with shutters of any description nexc 1.50 sqm each, complete all as specified.
Taking down aluminum frame with shutters of any description exc 1.50 but n.exc 2.0 sqm each, complete all as specified.
Taking down aluminum shutters of any description exc 1.0 but n.exc 2.0 sqm each, complete all as specified.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified.
S&F Powder coating anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified.
Supply & fix Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified.
Supply & fix Anodised aluminium power coated(Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified.
S&F anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.
S&F powder coated aluminium window and ventilator shutters(Thickness or powder coating not less than 50 micron), side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.
Supply & fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and . complete all as specified.
Supply and fixed in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy shed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Complete all as specified and directed.
S&F in repair 150 mm over all length of cover plate of floor door stopper of Brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.
Taking down easing and adjusting aluminum shutters/partitions including rubber neoprene packing complete of any description n.exc 1 sqm each and refixing in same opening, all as specified and as directed. Note :- Replacement of door closer, glass, lock, handle, tower bolt etc shall be measured and paid separately.
Taking down easing and adjusting aluminum shutters/partitions including rubber neoprene packing complete of any description exc 1 Sqm but n.exc 2 sqm each and refixing in same opening, all as specified and as directed. Note :- Replacement of door closer, glass, lock, handle, tower bolt etc shall be measured and paid separately.
Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., all as specified and as directed.
M&L for sheet glass 3mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed
M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.
M&L for sheet glass 4.80mm thick ordinary quality and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.
M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.
S&F in repairs Pre laminated 9 mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified.
M&L in repairs 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, handles, fixing accessories as required, complete all as specified.
Supply and fixing in repairs 19mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails. complete all as specified and as directed.
Supply and fixing in repairs 12mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails. complete all as specified and as directed.
M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified.
Supply and fixing Mortice lock vertical type (chrome) 100mm, 6 levers as in repair complete all as specified and as directed. (Make : Godrej Model No- 8194 or equivalent model in other approved makes)
Supply and fixing Mortise lock (200 mm Ultra Mortice lock with Universal brass (2H) handle set) as in repair complete all as specified and as directed. Make : Godrej Model No- 7660 or equivalent model in other approved makes)
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified.
M&L powder coated aluminium snap grid frame work for false ceiling of size 605x605 mm including 6mm dia GI (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified.
All as per item No 171 but fixing only.
M&L 4mm non asbestos fibre cement building boards flat, fixed or laid/inserted to timber/GI/aluminium frame work with screws complete all as specified.
M&L for preparation of new ceiling surfaces and applying two coats of Oil bound distemper over a coat of primer complete all as specified.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Supply and fixing PVC decorative beading of 5mm thick moulded /designed for PVC wall paneling inclusive of fixing complete all as specified and directed.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) for any sunk or raised moulding to flat surface over metal frame work and reinforced with GI wire mesh with complete arrangements, cornices, pattern/design etc over 2mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer complete, all as specified and directed.
M&L 12 mm thick seamless waterproof and termite proof WPC lovers wall panels fixed with probond adhesive and screwed to the wall etc complete all as per manufacturer instruction, all as specified and directed.
M&L 4mm thick water proof and termite proof charcoal wall panel pasted on 5.5 mm thick WPC white board with adhesive screwed to the wall etc complete, all as per manufacturer instruction, all as specified and directed.
M&L for 2nd class hardwood plain fillets, bullnosed, splayed, chamfered or rounded on one edge or face, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc 13& nexc 25 sqcm with polishing etc complete all as specified.
Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune Bevelled Tegular Edge Tiles of 16mm thickness and Armstrong Superfine 15mm face exposed grid. The tiles shall have sand texture visual with acoustical punchers, Humidity Resistance (RH) of 99%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 16mm bevelled Tegular edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 40%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly roduct. SUSPENSION: The tile shall be laid on Armstrong Superfine 38 with 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be leveled using perimeter fill. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications above) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall.
Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Armstrong recommended procedure. ARMSTRONG SUSPENSION SYSTEM accessories supplied by Armstrong consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).
DUTTA & DUTTA
GHOSH ENTERPRISE
PRABIR TRADERS
MS AP CONSTRUTION AND CO
MS HORIZEN
RAJ ENTERPRISE
UNIVERSAL TRADING CENTRE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .