EDCH-103/2024-25

Amount

Supply of Following Matarial as per relevent ISS

Insulated Dog Conductor

Bakelite HT Fuse

LT XLPE Cable AL 1x400 sqmm

LT Tailless Unit

Copper L-Piece

AL Lug 400 sqmm

Stone Pad

LT clamp with bolt & Nut

Shackle Insulator

barbed Wire

Nut, Bolt & Washer

LT Spacer

Scope of work

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5 Mtr. Long

STP Pole 9 Mtr. Long

Teeoff Channel with N&B

Earthing set complete

11 KV Disc Insulator with fitting

11 KV XLPE Cable 3x185 sqmm

ACSR Dog Conductor

Stay set Complete

250 KVA 11/0.4 KV T/F

Cable Jointing Kit Suitable for 11 KV XLPE Cable 3x185 sqmm

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Pcc Pole 8.5 Mtr. Long

STP Pole 9 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

Teeoff Channel with N&B

11 KV Disc Insulator with fitting

Bakelite HT Fuse

LT Tailless Unit

Copper L-Piece

AL Lug 400 sqmm

Stone Pad

LT clamp with bolt & Nut

Shackle Insulator

barbed Wire

Nut, Bolt & Washer

LT Spacer

Cable Jointing Kit Suitable for 11 KV XLPE Cable 3x185 sqmm

Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering/binding etc. in 33 KV/11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

11 KV XLPE Cable 3x185 sqmm

Insulated Dog Conductor

LT XLPE Cable AL 1x400 sqmm

ACSR Dog Conductor

Providing & Fixing of 11 kv Busbar Structure complete including foundation & earthing

Construction of plinth of size 5' * 5 * 4' above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Chemical earthing of 250 KVA medium Power Transformers

Chemical earthing of 400 KVA medium Power Transformers

Net Fencing of 250 kva new and 400 kva old T/F

Repairing of existing pole with welding, regrouting & Muffing

Dismenatalling of Old damage line

Back Cartage of Following Material

ACSR Weasel conductor

SUMIT ENGINEERING (BID ID -4996808)

VINAYAK ELECTRICALS (BID ID -5003574)