Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.6 CrAccepted-AOC ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | ₹10.6 Cr Quoted ₹10.8 Cr | L1 | Accepted-AOC Being L1 Bidder |
| 2 | L2₹11.4 CrRejected-AOC | ₹11.4 Cr | L2 | Rejected-AOC Not Being L1 Bidder |
| 3 | L3₹11.6 CrRejected-AOC | ₹11.6 Cr | L3 | Rejected-AOC Not Being L1 Bidder |
| 4 | L4₹11.7 CrRejected-AOC | ₹11.7 Cr | L4 | Rejected-AOC Not Being L1 Bidder |
| 5 | L5₹11.8 CrRejected-AOC | ₹11.8 Cr | L5 | Rejected-AOC Not Being L1 Bidder |
Tender Value
₹13.8 Cr
EMD Value
₹10.2 L
Closing Date
27 Jun 2024, 6:00 pmClosed
CHIEF ENGINEER, HQ CE CHENNAI ZON
HQ CE CHENNAI ZONE ISLAND GROUNDS ANNA SALAI CHENNAI 600 009
ADDN ALTN TO 182 MD ACCN IN RESPECT OF OFFRS STUDENTS, JCO AND OR ACCN IN NEW HASTING LINE, RC LINE, MERCURY LINE, HARNESS LINES AND TRISHUL LINE AT MCEME, SECUNDERABAD
2024_MES_656645_1
89078/E8
Open Tender
Civil Works
540 days
SECUNDERABAD
As per NIT and Appendix A to NIT
8 documents required · 8 mandatory
₹3,000
GARRISON ENGINEER (MCEME) SECUNDERABAD
₹10.2 L
Yes
23 Sept 2024
29 May 2024
3 Jul 2024
29 May 2024
27 Jun 2024
22 Jun 2024
Amount
Demolition of cement concrete (unreinforced) of any description and in any position (as in roof paddings etc) not otherwise specifically provided for including removal of the existing water proofing treatment of any description and removal of debris to outside MD land.etc., complete all as specified and as directed.
Material and labour for providing 25mm average thick Plain Cement Concrete 1:2:4, type B0, using 12.5mm graded stone aggregate mixed with liquid water proofing compound laid to slope as in roof padding and finished the surfaces fair and even complete all as specified and as directed.
Material and labour screed bed 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions laid over the roof padding concrete & chajjas and finished the surface even and smooth without using extra cement complete all as specified and as directed. Note: Liquid WPC will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc completed all as specified and as directed.
Demolition of cement concrete sub base including tile with screed and removing debris off the premises complete as specified and directed.
Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a), 10 mm thick (square/ rectangular) polished, light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a) 10 mm thick, polished, light shade of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile including 10mm thick backing coat in cement mortar (1:3) complete all as specified and directed
Material and labour for Anti-skid / Non Skid coloured ceramic tiles of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.06Sqm but not exceeding 0.11 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour for Anti-skid / Non Skid coloured ceramic tiles of grade B-II(a), 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour Anti-skid/ Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile including 10mm thick backing coat in cement mortar (1:3) complete all as specified and directed
Material and labour for glazed coloured ceramic tiles of grade B-III, 6 to 7mm thick of size 450x300mm or of size matching to floor tile as approved by GE, fixed on vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:3, 10mm thick complete all as specified and as directed.
Material and Labour for granite stone slab (of any type) 20mm thick machine cut, laid over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone including cutting and polishing etc., and rounding to edges of stone slabs complete all as specified and as directed.
Material and labour for Chequered cement concrete tiles, 25mm thick of size 300x300mm, set and jointed in neat cement slurry in floors and pointed with grey cement and pigments over and including 20mm thick screed in cement mortar 1:6 etc., complete all as specified and as directed.
Material and labour for 20-25mm thick machine cut kota stone slab in flooring (in single piece for full length of step as in treads of stair case) and laid over and including 20mm thick screed in cement mortar 1:6, set and jointed in neat cement slurry and pointed with grey cement mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish etc., complete all as specified and as directed.
Material and labour for 20-25mm thick machine cut kota stone slab fixed on vertical surfaces such as in skirting (single piece for full length of step as in riser of steps), set and jointed in neat cement slurry and pointed with grey cement mixed with pigments to match the shade of the slab over and including a backing coat in Cement Mortar 1:4,10mm thick, rubbing, polishing to mirror finish etc., complete all as specified and as directed.
Demolition of brick work or precast cement concrete block walling or stone masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facing etc., complete all as specified and as directed.
Material and labour for brickwork with fly ash modular bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and as directed.
Material and labour Brick work with Fly ash modular bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and as directed.
Taking down cement plaster of any description on brick work or stone walls / concrete surfaces / ceiling plaster etc., including raking out of joint, hacking for key scrubbing down with water etc., complete all as specified and as directed.
Material and labour for rendering 10mm thick cement plaster in Cement Mortar 1:6, finished the surfaces even and smooth without using extra cement on internal faces complete all as specified and as directed..
Material and labour for rendering in Cement Mortar 15mm thick in two layers, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick surfaces, finished even and smooth without using extra cement etc., complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Material and labour for rendering to soffits of ceiling, etc., 5 mm thick in cement mortar 1:3, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 10mm thick in two layers on fair faces of brick work, chajja, fascia, slabs etc in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying 3mm thick white wall care putty to make the surface even and smooth finish, rubbing with sand paper of different grade etc., and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer etc., complete all as specified and as directed.
Material and labour for complete removal of existing treatment on old surfaces of wall and and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed.
Material and labour for applying three coats of white wash to ceiling surfaces including preparation of newly plastered surfaces of ceiling etc., complete all as specified and as directed.
Material and labour for preparation of old treated surfaces of ceilings and applying one coat of white wash on ceiling complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and finishing with Acrylic Smooth exterior paint of required shade, Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.
Material and labour for complete removal of existing treatment on walls by scraping, rubbing washing down etc, and applying two coats of Acrylic Smooth exterior paint of required shade, Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as specified and as directed..
Material and labour for one coat of synthetic enamel paint including preparation of old wooden surface of any description over 10 cm width and girth complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of 75mm thick and finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.
Material and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, and applying high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr water + 3 kg cement) over cleaned surfaces complete all as specified and as directed .
Demolition of Reinforced Cement Concrete in fins, fascia column edges etc., including cutting reinforcement complete all as specified and as directed .
Formwork to flat surfaces of RCC fins, fascia ,chajjas and similar items including edges, for fair finished surfaces complete all as specified and as directed.
Material and labour for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in chajjas complete all as specified and as directed.
Formwork to rough finished flat surfaces concrete, soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc complete all as specified and as directed.
Material and labour for RCC 1:2:4, type B1, using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour PCC 1:3:6, type C1, using 20mm graded stone aggregate as in coping including formwork etc., complete all as specified and directed.
Demolition of Reinforced Concrete in manhole cover slabs etc n. exc 15 cm thickness otherwise specifically provided complete all as specified and as directed.
Material and labour for reinforced precast cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in manhole cover slabs etc., including necessary form work and set in CM 1:6, complete all as specified and as directed. Note:- Reinforcement will be measured and paid separately
Material and labour for Mild Steel TMT bars 10m dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping columns, hooking ends And binding with and including MS wire( annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 Sqm each but not.exc. 4 sqm each complete all as specified and as directed.
Taking down, Shutters of any description exceeding 1Sqm but not exceeding 2 Sqm each etc., complete all as specified and as directed.
Taking down Shutters and Resecuring or easing & adjusting, and fixing in the same opening of any description exc 1 sq. m and not exc. 2 sq. m each complete all as specified and as directed.
Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, in opening as per manufacturers instructions complete all as specified and as directed.
Supply and fix Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.
Supply and fix 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and as directed.
Supply and fix 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed.
Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.
Supply and fix 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
Supply and fix Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges – 1 set, Handle & Stay and 4mm plain float glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6mm x 12mm MS flat and fixed to window frame with screws complete all as specified and as directed .
Supply and Fix Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame complete all as specified and as directed.
Supply and Fix Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame complete all as specified and as directed.
Material and labour for Second class Hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted including treating back of chowkats with tar or coal tar black paint etc., complete all as specified and as directed.
Material and labour for PCC 1:3:6, type C1, using 20 mm graded stone aggregate as in filling in frame complete all as specified and directed.
Supply and fix mild steel flats 25x3mm as in holdfasts complete all as specified and as directed.
Material and labour for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint area tarred n.exc 0.1Sqm each.
Supply and fix 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, decorative teak veneered face on both sides with lipping to match with frame and fitted to chowkats etc., complete all as specified and as directed.
Supply and Fix 2nd class hardwood glazed and skeleton door shutters, 35mm thick divided into squares, open rebated and prepared to receive glass, gauge etc., (without sash bars) edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.20 (a) (wire mesh doors) supplied and fitted to chowkats complete all as specified and as directed.
Supply and fix 100 mm long MS butt hinges with galvanised mild steel hinge pin anodised complete all as specified and as directed.
Supply and fix Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.
Dismantling timber scantling as in fillets, rails etc under 40 sqcm in section and fixed in any position complete all as specified and as directed.
Dismantling boarding, cupboards shelves etc. any thickness and description , fixed with nails/screws complete all as specified
Material and labour 2nd class hard wood plain fillets of sectional area exc 13 sqcm but n. exc 25 sqcm square(as in chowkats of CBs), rectangular in section, wrought and smooth finish, secured with nails or brads complete including polishing all as specified and as directed.
Material and labour 2nd class hard wood fillets of sectional area exc. 6 Sqcm but not. exc 13 Sqcm square, rectangular in section, wrought and smooth finish complete all as specified and as directed.
Material and labour 2nd class hard wood fillets (in beading of CBs shutter) sectional area not. exc 3 sqcm square , rectangular or triangular in section, wrought and smooth finish but bullnosed, splayed chamfered or rounded on one edge or face complete all as specified and as directed.
Supply and fix in repairs prelaminated Medium Density Fibre (MDF) board, 18-19 mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work for cupboards, shutters and book shelves and kitchen cabinets , drawers etc. complete all as specified and as directed.
Material and labour for 25 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination & other side balancing white laminations fixed with screws to timber frame work etc. complete all as specified and as directed.
Supply and fix continuous (Piano) Hinges 30 mm width of flaps, mild steel bright finish or electrogalvanised etc., complete all as specified and as directed.
Supply and fix 100mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed all as specified and as directed.
Supply and fix 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed.
Supply and fix mild steel Mortice locks 65 mm size 4 lever type for cupboards, grade-1 vertical type complete all as specified and as directed.
Supply and fix MS helical door spring 300 mm long with roller and roller plate complete all as specified and as directed.
Supply and Fix in repairs Stainless steel, chromium plated curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick of approved pattern complete all as specified and as directed.
Supply and fix stainless steel designer curtain rod's brackets of approved quality with decorative knob and pattern and fixed to wall with PVC rawl plug and screws etc., complete all as specified and as directed.
Supply and fix in repairs 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and as directed.
Supply and fix in repairs 4mm thick figured glass pin head type and glazing with oil putty in square n. exc. 0.50 Sqm in each pane including hacking out old broken glass completed all as specified and as directed.
Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest, colour white with and including P trap, concrete bedding and making necessary connection to soil pipes and flushing cistern etc., complete all as specified and as directed.
Supply and fix in repairs Vitreous china wash down water closet pan, pedestal pattern, EWC, colour white, closed pattern with flat bottom with and including fixing bolts, white coloured PVC seat cover, mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) etc., complete all as specified and as directed.
Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed.
Supply and fix in repairs Vitreous china Wash Hand Basin, white, flat back of size 550x400mm with brackets, porcelain stopper, cutting for and pinning ends of brackets or erecting stand including waste fittings/ coupling of brass chromium plated 32 mm dia with long screwed shanks & fly nuts and fancy type CP pillar tap 15mm complete all as specified and as directed.
Supply and fix in repairs soap dish, vitreous china white, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
Supply and fix chromium plated brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified and as directed.
Supply and fix in repairs for low density polyethelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified and as directed.
Taking up or down steel tubing & connections, 15mm dia complete all as specified and as directed.
Taking up or down steel tubing & connections, 20mm dia complete all as specified and as directed.
Supply and fix 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.
Supply and fix 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.
Supply and fix 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.
Cutting chases in brick walls/concrete surfaces, pinning in not exc 10 cm girth, making good to facings where required and pointing in cement mortar 1:3 etc., complete all as specified and as directed.
Supply and fix in repairs 15mm Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and as directed.
Supply and fix in repairs 15mm Stop valves/ angle cock, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fix in repairs chromium plated 15mm stop valves/ angle cock, with long shank and cup (concealed type), fancy type, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified
Supply and fix 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers complete all as specified and as directed.
Supply and fix in repairs chromium plated shower rose 125 mm size with swivel joint fixed in repairs complete all as specified and as directed.
Dismantling PVC water tanks of capacity exceeding 250 ltrs and not exc. 500 Ltrs complete all as specified and as directed.
Supply and Fix, 500 litres capacity Rotational Moulded Polyethylene (HDPE) water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) etc., complete all as specified and as directed.
Disconnecting existing tanks, capacity exc. 250ltrs & not exc. 500ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as specified and as directed.
Supply and Fix in repairs Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for iron/PVC pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed.
Supply and fix 20 mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 210gms) complete all as specified and as directed.
Supply and fix in repairs Stainless steel kitchen sink of over all size 915mm x 460mm with drain board and bowl size 410mm x 330mm x 160mm or nearest higher size made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets or bedding in cement mortar to dwarf wall as required and connecting union to pipe including taking down of existing kitchen sink of any size compete all as specified and as directed.
Dismantling of cast iron RCC, AC or PVC pipe jointed in CM any bore complete all as specified and as directed.
Supply and fix 110 mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc including taking down old pipes complete all as specified
Supply and fix in 75 mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floors etc including taking down old pipes complete all as specified
Supply and fix 110mm UPVC (SWR) bends any radius complete all as specified
Supply and fix 75mm UPVC (SWR) bends any radius complete all as specified
Supply and fix 110mm UPVC (SWR) bends any radius but with access doors complete all as specified
Supply and fix 75 mm UPVC (SWR) bends any radius but with access doors complete all as specified
Supply and fix UPVC (SWR) floor trap, plain with grating including jointing with solvent to waste pipe fixed in cement concrete type B-1 (1:2:4), 75 mm dia outlet complete all as specified and as directed.
Supply and fix UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
Supply and fix 110 mm UPVC (SWR) vent cowl complete all as specified and as directed.
Supply and fix in repairs for low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 40mm bore complete all as specified and as directed.
Supply and fix 140mm long floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor or bottom of door complete all as specified and as directed.
Supply and fix in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) complete all as specified and as directed.
Demolition of Concrete in sunken floors and pavings exc 15 cm thickness (below or above ground level) otherwise specifically provided complete all as specified and as directed.
Material and labour for screed bed 15 mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral liquid water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured & paid separately
Material and labour for 25mm thick, PCC 1:2:4, type BI using 20 mm graded stone aggregate as in foundation, filling in sunken portions and mass concrete complete all as specified and as directed .
Material and labour for providing and applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, ShaliUrethane BTD with Zero VOC or of any approved make-STP/Fosroc/BASF to form the membrane in situ at site with 3 layers of monolithic, seamless finish having >500% elongation. The first layer is to be formed mixing with clean water in the ratio of 1:1 @ 400 Gms per Sqm and shall act as the prime coat to fill in the cavities. This can be brush or roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or spray system with the recommended nozzle size on to the primed surface. Providing and applying 50 Gsm fiber cloth over the 1st coat, when substrate till the coat is tacky. Providing and applying 3rd coat @ 1kg/Sqm to finish the application for a thickness of 1.5mm membrane formed in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification and all as directed.
Material and labour for PCC 1:5:10, type E-2 using 40mm graded aggregate as in filling and mass concrete in sunken floors compete all as specified and as directed.
Supply and fix Kitchen plate rack of size 900mm x 750mm or nearest higher size made out of stainless steel sheet of grade 202, thickness not less than 0.80mm thick fixed on wall with plug and chromium plated screws complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and as directed.
Material and labour for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.
Material and labour for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc., complete all as specified and as directed.
Material and labour for Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.
Supply and fix Rolled sections as in main and cross beams, hip and jack rafters; purlins here connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates quality conforming to Fe 410W(Gde-250) complete all as specified and as directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of zinc chrome primer, including preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, AC Sheets any gauge, thickness including Nainital or similar pattern roof covering/wall cladding complete all as specified and directed.
Supply and fix pre painted galvalume aluminium zinc coated trapezoidal profile steel sheets 0.5mm total coated thickness, any colour having tensile strength of 550 Mpa as in roof covering/wall cladding to walls, fixed with self tapping screws complete all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coated Plain steel sheet 0.5mm total coated thickness, of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with self tapping screws complete all as specified and directed.
Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced exc 15 cm complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.
Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Supply and fix Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
Supply and fix in repairs PVC laminated designed (one side pvc lamination and other side aluminium paper) gypsum board of size 600mm x 600mm, 8mm thick decorative type fixed in aluminium frame work with screws or nails etc., complete all as specified and as directed.
Supply and fix stainless steel tubular towel rack 600mm long with lower hangers and hooks, Chromium plated all as per Cat No. AHS-1581H of Jaquar or Cat No.T6008A1of Parryware or BA-03 of Prayag or technocommercially equivalent of other specified makes, fixed to wall with rawl plug and chromium plated brackets or screws complete all as specified and as directed.
Supply and fix Corner glass shelf of 225mm radius with railing all as per Cat No.ACN-CHR-1173 of Jaquar or Cat No.T6010A1 of Parryware or Cat No.F5005102 of Cera or BEA-44 of Prayag or technocommercially equivalent of other specified makes fixed to wall with rawl plug and chromium plated brackets or screws complete all as specified and as directed.
Supply and fix Wall hung Water Closet, white colour, with UF soft close seat cover hinges with complete accessories all as per Cat No.KUS-WHT-35953BIUFSM of Jaquar or Cat No.Helix C8895 of Parryware or Cat No.S1043144 of Cera or technocommercially equivalent of other specified makes fixed to wall as per manufacturer's instructions etc., complete all as specified and as directed.
Supply and fix counter top wash basin of size 600 x 450 x 150mm or nearest higher size all as per Cat No.QNS-WHT-7601 of Jaquar or Cat No.91043 of Hindware or Cat No.A2020109 of Cera or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix stainless steel towel rail 600 mm long all as per Cat No. AQN-7711 of Jaquar or Cat No.F890011CP of Hindware or Cat No.No.T6001A1 of Parryware or BA-01 of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix stainless steel soap dish all as per Cat No.AQN-7731 of Jaquar or F5001106 of Cera or BA-15 of Prayag or T6003A1 of Parryware or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix angular stop cock with flange all as per Cat No.QQt-CHR-7053 of Jaquar or G03071A1 of Parryware or 9310 of Prayag or G1018201 of Cera or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix health faucet (ABS with 8 mm dia, 1.2 m long flexible tube and wall hook (allied) all as per ALD-CHR-573 of Jaquar or T9941A1 of Parryware or F160038 of Hindware or BEA-85 of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix toilet paper holder all as per Cat No.AQN-7751 of Jaquar or F450027 of Hindware or BA-18 of Prayag or T6005A1 of Parryware or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix two way bib cock chromium plated with wall flange complete all as per Cat No.QQT-7041 of Jaquar or G1934A1 of Parryware or F110003SCP of Hindware or PIS-12H of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix in central hole basin mixer with regular spout with popup waste system with 450mm long braided hoses (QUEENS) complete all as per Cat No.QQT-CHR-7169B of Jaquar or G0314A1 of Parryware or F120009 of Hindware or PIS-50H of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) all as per Cat No.CON -281KN of Jaquar or F730022 of Hindware or G4617A1 of Parryware or 8380 of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix over head shower 200 mmx200mm including shower arm 20mm dia & 375/450 mm long round shape with 90 ° bend for wall mounted showers of with flange complete all as per Cat No.OHS-1619 & SHA-479L450 of Jaquar or T9975A1& T-9802A1 of Parryware or F160103 & F160024 of Hindware or BOS-104A & BOS-50 of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Supply and fix 15 mm dia stop/ angle valve, chromium plated fancy type, cast copper alloy with capstan/ fancy type handle, screwed down, screwed both ends for iron pipe or for brass ferrule with wall flange all as per Cat No.CON-053KN of Jaquar or T3511A1 of Parryware of : F730039 of Hindware or PIS-10 of Prayag or techno-commercially equivalent of other specified makes fixed complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed .
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes etc complete all as specified and as directed .
Material & Labour for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multi stranded copper conductor confirming to IS-694 1990 with ISI marked (for phase, neutral and earth) in and including non-metallic rigid PVC conduit medium grade with ISI Mark of minimum 20mm dia and all conduit accessories concealed including cutting/ chases in wall/ceiling/ fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel metal flush boxes along with suitable size modular cover plates with frames for fixing modular switches and sockets, fan regulators etc. of suitable size modules and the earth wire to be connected to common earth dolly complete all as specified and as directed for the following :- Note: Location of light points, 6 Amp socket points and light fittings may be decided by Engineer-in-charge as per site/user requirement
One light point controlled by one modular switch 6A one way
One Ceiling/Exhaust fan point controlled by one modular switch 6A
One bell point controlled by one modular bell push.
One light point controlled by two numbers of 2-way modular switch, 6 Amps.
One 3 pin 6 Amps switch socket outlet point controlled by one switch on the same board.
One 3 pin 6 Amps switch socket outlet point controlled by one switch on independent board.
Material and labour for Point wiring complete all a specified with 1100 Volts grade 4sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS 694 1990 with ISI marked (for phase, neutral and earth)in and including non-metallic rigid PVC conduit medium grade ISI Mark of minimum size 20mm dia all accessories concealed including cutting/ chases in wall/ ceiling/ fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel metal flush boxes along with suitable size modular cover plates with frames for fixing modular sockets of suitable size modules and the earth wire to be connected to common earth dolly all as specified and as directed all as specified and as directed for One three pin modular switch socket 16 amps outlet on independent board.
Supply and fix modular switch 1way 6A, 1 module all as specified and as directed.
Supply and fix modular switch 2 way 6A, 1 module all as specified and directed
Supply and fix modular switch 1way 16A, 1 module all as specified and as directed.
Supply and fix modular Bell push 6A, 1 module, 230 Volts all as specified and as directed.
Supply and fix modular type shuttered Socket outlet, 3 pin 6 Amps, 230 volts two modules with ISI mark complete all as specified and as directed.
Supply and fix modular type shuttered Socket outlet, 3 pin 6/16 Amps, 230 volts Two modules with ISI mark complete all as specified and as directed.
Supply and fix Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 65 x 50mm three terminals, 240 Volt, AC Single phase complete all as specified and as directed.
Supply and fix Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.
Supply and fix LED lamp 10Watts complete all as specified and as directed .
Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, aluminium housing, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix electric bell, AC, 230V, single pole and testing complete all as specified and as directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to AGE E/M store for re use in maintenance work complete all as specified and as directed.
Supply, fix, test and commissioning of Energy efficient Ceiling fan with three blades including down rods, stepped type electronic regulator and other accessories, 230 V, 1200mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with Brushless Direct Current motor (BLDC) fixed to roof/ceiling with suitable clamp including provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan etc., complete all as specified and as directed.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
Material & Labour for Submain wiring with two single core 10 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Two runs of 10 Sqmm cable, one run of 10 Sqmm earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
Material & labour for Submain wiring with two single core 6 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
Material & labour for Submain wiring with two single core 2.5 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn in and including concealed rigid PVC conduit of suitable dia, conduit fittings and accessories concealed in wall/floor with one run of 2.5 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of endings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
Supply and fixing sheet Metal enclosure double door type for DB’s 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete all as specified and as directed.
Supply and fixing sheet Metal enclosure double door type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete all as specified and as directed
Supply and fixing MCB SPN 40-63 Amps , C curve, 240 volt, 10 KA, complete all as specified and as directed.
Supply and fixing MCB SPN 32 Amps, C curve, 240 volt, 10 KA, complete all as specified and as directed
Supply and fixing MCB single pole 6 to 32 Amps, C curve, 240 volts, 10 KA complete all as specified and as directed.
Supply, fix, test and commissioning of Exhaust fan of size 300mm sweep, metallic body, copper winding, 1200RPM, 230V AC single phase complete set with metal blades, frames and louvers including making of hole to the wall and making good the disturbed surface and connecting up with three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan etc., complete all as specified and as directed.
Supply and fix Electric storage water heater (Geyser) of capacity 25 litres, steel body with copper inner tank and heating element upto 2 KW BEE 5 Star rated, vertical type with all accessories such as safety valve, thermostat, NRV, connection piece etc., and powder coated metallic body conforming to IS:2082 including drilling holes into the walls, provision of 2 Nos of 450 mm long Hot & cold PVC connections , 4 Nos of suitable size anchor bolts, nuts and washers, connecting up electrical and water supply lines, testing, commissioning and making good the disturbed surfaces etc.,complete all as specified and as directed .
Supply and fix LED street light fitting 35Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed with GI pipe bracket made of 40 mm bore light grade pipe made to shape of overall length of 1.2 mtr including MS clamps, nuts & bolts of required size complete all as specified and as directed.
Earthing complete with Galvanised steel earth plate electrode 600x600x6mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to GI earth strip of 32mm x 6mm size by means of bolts, nuts and washers protected by GI tubing light grade 40mm dia upto Test point 20mm dia watering pipe with funnel & wire mesh, PCC pit in PCC 1:2:4 using 20mm stone aggregates chamber 40 mm thick cover slab with RCC 1:2:4 type B-1 using 20mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil, removal of surplus soil and providing charcoal dust & salt layers all around the earth plate upto 15cm all as required, specified and directed by Engr-in-Charge. Note : The rate is deemed to be inclusive of the cost of earth work, excavation on any type soil and removal of surplus soil to a distance of 50 Mtrs, dismantling of existing earth pit, PCC 1:2:4 type B1 for earth pit cover 6Nos 6mm dia CTD bar on both direction, earth lead protection GI pipe medium grade with suitable size from earth plate electrode to main switch, GI strip length up to 7.50Mtr will be measured as one unit.
Supply, install, testing and commissioning, factory made and tested, CPRI approved LT panel board indoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar 200 Amps rating , 4 strips, the panel should be dust proof, IP 54 class protection and made out of 2.00mm thick CRCA mild steel sheet , hinged doors, front opening for each chamber arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to Provision of 10 number meters including plinth of panel as requirement of site complete all as specified and directed including following accessories :- (a) MCCB 4 pole adjustable, Thermal, magnetic release,125 Amp, 415 Volts 25KA - 01 No. (Incoming) (b) MCB, SP&N 40 Amp, C curve, 24 Volts 10KA - 10 Nos (Outgoing) (c) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.
Design, supply, installation, testing and commissioning CPRI APPROVED factory fabricated, out door type, LT Feeder Pillar box of size 1.0mt x1.0mt x 0.5mt or nearest higher size, IP 55 protection grade, made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection, Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, cable glands of appropriate size, etc. and supported with 65x65x6mm Mild Steel Angle Iron Frame and 500 mm above ground level, embedded in PCC 1:2:4, type C-2, 45 CM below ground level and 50 CM above ground level complete with internal connection with suitable size of strip, cable lugs and cable glands and Testing after installation complete all as specified and comprising of the following:-
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 16 sq mm x 4core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 25 sq mm x 4core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 35 Sq.mm x 3.5core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 95 Sq.mm x 3.5core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 150 Sq.mm x 3.5core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Supply and lay in trenches/drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 240 Sq.mm x 3.5core including connecting up using suitable size aluminium lugs testing and commissioning etc., and taking out existing cable complete all as specified and as directed.
Note for items No.192.00 to 197.00 : Excavation earth work, sand cushioning and cable protection shall be measured and paid separately under relevant items.
Supply and spread approved dry river sand for cable laying / foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as specified and as directed. Note:- Punned thickness will be measured for payment purpose
Supply and lay burnt Bricks, old size, sub class "B", laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable complete all as specified and as directed.
Disconnection of HT and LT side electric cable connection of pole / plinth mounted transformer capacity up to 500 KVA, shifting from existing location to MES yard/ other location through crane including transportation without damage of transformer, after shifting of transformer re connecting of both HT/LT side elect cable and testing with full load complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables & pipes, laying of poles, in trenches and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as specified and as directed.
Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtrs above from the starting point complete all as specified and as directed.
Supply and lay GI tubing, light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cable scomplete all as specified and as directed.
50 mm bore light grade
80 mm bore light grade
100 mm bore light grade
Supply and lay Galvanised steel water tubing medium grade conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., laid in trenches or on floors and testing for leakages etc., including taking down existing deteriorated pipes complete all as specified and as directed for following size of pipes :- Note : Excavation earth work shall be measured and paid separately under relevant items.
40 mm bore medium grade
25 mm bore medium grade
20 mm bore medium grade
Supply and Fix Gun metal globe or gate valve confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., and taking down unserviceable gate valves complete all as specified and as directed for the following sizes:-
20 mm bore.
25 mm bore.
40 mm bore.
TRIVENI CONSTRUCTIONS
AFSON ENGINEERS & CONTRACTORS
SRI LAKSHMI VENKATESHWARA INFRATECH
Sri Raghava Constructions Ltd
R. Wadhumal and Sons
C R R CONSTRUCTIONS
SVS PROJECTS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid