Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 CrAccepted-AOC | ₹3.3 Cr Quoted ₹3.0 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹3.0 Cr+₹4.3 L (1.45%)Rejected-Finance VILLAGE POST SURANGANI TEHSIL SALOONI DISTT CHAMBA HIMACHAL PRADESH 176317 | CHAMBA | HIMACHAL PRADESH | 176317 | ₹3.0 Cr+₹4.3 L (1.45%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.8 Cr+₹77.3 L (25.9%)Rejected-Finance | ₹3.8 Cr+₹77.3 L (25.9%) | L3 | Rejected-Finance L3 |
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
3 Jun 2022, 11:00 amClosed
Superintending Engineer 7th Cirlce HPPWD Dalhousie
Superintending Engineer 7th Cirlce HPPWD Dalhousie
Formation cutting , R/walls, Cross Drainage Works, GSB, WBM-II, WBM-III , Tarring, Drain , Parapet, Crash barrier and road furniture etcetra including five years routine maintenance). Under NABARD RIDF-XXVII
2022_PWD_60889_2
SEVII NABARD TISSA
Open Tender
Civil Works
Item Rate
548 days
Tissa
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
₹8.0 L
19 Dec 2022
21 May 2022
3 Jun 2022
21 May 2022
3 Jun 2022
21 May 2022
Amount
Excavation for road way in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting width and trimming of side slopes, camber, super elevation and levels as shown in the drawings and as directed by the Engineer-in Charge complete according to the MORD Technical Specification Section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required.All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 1201.43 cubic meter quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic meter shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occurred in all cases.The rate including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Earth work in excavation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 & 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, M-10 Grade (M-Ten) Nominal mix 1:3:6 (one cement : three sand : six graded crushed stone aggregate (40mm) forty millimeters nominal size)on ground or under water in open foundations for all types of structures, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete as per drawing and MORD technical specification section 800,900, 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, Grade M-10 (M-Ten) nominal mix 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeters) nominal size)on ground or under water in drains including pumping or bailing out water/dewatering (surface and sub soil water) removal of the slush which may arise at the time of laying concrete, for all heights/depths, and any quantum of water including cost of form work complete as per drawing and MORD technical specification section 800, 900, 1200 or as per direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials with all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size), on ground or under water for all type of structure, in R/wall / B/wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying concrete for all heights/depths including cost of form work and curing complete for 14 (fourteen) days as per drawing and MORD Technical specification section 800, 900, 1200 and 1600 as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in substructure Grade M-15 (M-Fifteen) Nominal mix 1:2½:5 (one cement : two and half sand : five graded crushed stone aggregate (40mm) forty millimeters nominal size)on ground or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, in toe walls and parapets etcetera including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure Grade-M-20 (M-Twenty) designed mix with cement contents not less than of 350 kgs. (three hundred fifty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Bed Block, Dirt wall etcetera for all heights/depths, including cost of form work and curing complete but excluding the cost of reinforcement for reinforced concrete work as per drawing and MORD technical specification section 800, 900 & 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure Grade-M25 (M-Twenty Five) designed mix with cement contents not less than 400 kgs. (four hundred kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Deck slab and the like for all heights, including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawing and MORD technical specification section 800, 900 & 1400 complete as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and virbrated plain cement concrete in open foundation for all type of road structure using of plain cement concrete grade M-20 (M Ten) nominal mix 1: 2: 4 ( One cement : two sand : four graded crushed/broken stone aggregate 40mm (forty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Back filling with granular materials behind abutment, Retaining wall/Breast wall, Wing walls and the like complete as per drawings and MORD technical specification section1200,1600 and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Providing 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1 (V):20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section700,1200 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying (to level or slope) 900mm (Nine Hundred millimeter) diameter ISI marked reinforced cement concrete heavy duty non pressure pipes I.S class NP-3 for culverts on first class bedding of granular material in single row including providing and fixing collar with cement mortar 1:2 (one cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete bedding and masonary work in head walls and parapets etcetera as per drawing and MORD technical specification section 1100 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORD technical specification section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, Toll Tax, GST or other Taxes imposed by the Government.
Loosening of the ground up to a level of 300mm (Three hundred millimeter) below the sub-grade level, watered graded with motor grader and compacted in layers to meet the requirements of Table 300.1 and 300.2 with three wheel 80-100 (eighty – Hundred) kN static roller for sub-grade construction as per MORD Technical specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Construction of Granular sub base 150mm (one hundred fifty millimeter) compacted thickness by providing well graded material as per table 400.1, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (eighty – oneHundred) kN static roller to achieve the desired density, complete as per MORD technical specification section 400 for grading-I material and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimeter to forty five millimeter) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening Type-B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic metre per 10 Sqm. (ten square metre) and binding material at the rate 0.06(Zerro point Zero six)cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimeter) size to water bound macadam specification including spreading in uniform thickness, using template, hand packing motor grader, rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square meter as per MORD Technical specification section 500, as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing, laying and rolling open graded premix carpet of 20mm ( twenty millimeter) compacted thickness composed of 13.2mm ( thirteen decimal two millimeter) to 5.6 ( five decimal six millimeter) aggregate for wearing coarse including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (thirty/forty) tonne per hour capacity transporting mixed material with tipper to site of work and laying with paver finisher to the required grade and camber rolling with power road roller 8/10 (eight/ten) tonne using 0.27 cum (zero decimal two seven cubic metres ) of graded stone aggregate mixed with 14.6 kg (fourteen point six kilogram)of bitumen binder using VG-10 (Viscosity grade- ten) per ten square meter of road surface to required line grade and level but excluding the cost of tack coat and seal coat inclusive of all corrective measures such as laying of profile corrective coarse for all depth filling of depression for all depth and construction of super elevation and camber, where required as per M.O.R.D. technical specifications section 500 by mechanical means or as directed by the Engineer-in Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using type B at the rate of 6.8 kg (six point eight kilogram)per ten square metre mixed with crushed sand defined as passing 2.36mm (two decimal three six millimeter) sieve at the rate of 0.06 cum (zero decimal zero six cubic metre) per ten square metre using bitumen VG-10 (Viscosity grade- ten) by mechanical means as per MORD technical specification section 500 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of material with in all leads, lifts and other incidentals .The rate is including octori, royality,malkana ,toll tax,GST, or other taxes imposed by the Government.
Providing and errecting a "W" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail, 70cm (Seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2 m (Two metre) centre to centre, 1.8 m (One decimal eight metre) high, 1.1 m (One decimal one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm (One hundred fifty into seventy five into five millimetre), 330 mm (Three hundred thirty millimetre) long complete as per MORTH Technical Specification section 800 Item to include all as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of typical NABARD informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimetre into twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Numbers) 75mmx75mm (seventy five millimetre into seventy five millimetre) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade nominal mix 1:2.5:5 (One cement: two and half sand: five graded or crushed stone aggregate 40mm (Forty milimetre) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre), 600mm ( six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimetre into forty seven millimetre) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetra will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 including carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge. The rate is including octroi,royality,Mlakana,tolltax, Sale Tax, GST or other taxes imposed by the government.
Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) Circular as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 mm x 450 mm ( six hundred millmetre into four hundred fifty millimetre) rectangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 900 mm( nine hundred millmetre) octagon board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 900 mm (nine hundred millmetre) equilateral triangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in ordinary kilometer stone (precast) of standard design as per IRC:8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 Including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government
Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in 200 mtr ( two hundred metre) stone (precast) of standard design as per IRC:8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 Including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government
sahab singh thakur
Dildar Ali
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .