Special repairs to water supply, sanitary, doors, windows and other repair arrangements for female ward, F500 and sankara Hall in Government Arignar Anna Memorial Cancer Hospital at Karapettai, Kancheepuram in Kancheepuram District.

Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Removing the drainage silt under water from the manholes by engaging scavengers, conveying the removal silt away from the site and drainage in low lying area. The inlet pipes of manhole from the building is to be cleaned completely by the bamboo sticks.

Removal of blockage in drainage pipe line at maximum depth including earthwork excavation and cut opening of the pipe line and redoing the pipe line in the alignment after removal of blockage including engaging skilled scavenger for drainage work drainage work supplying and making bamboo stick bundies of drainage block removal in pipe line and the silt is to be conveyed and dumped in low lying area etc., complete.

Levelling the uneven surfaces by removing the heaps of earth etc., by plugging out the tree trunk with roots below the ground level and removing the bushes using JCB Machinery etc., complete complying with standard spefication and as directed by the departmental officers.

Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level

50mm dia UPVC pipe

32mm dia UPVC pipe

65mm dia UPVC pipe

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements

50mm dia UPVC Tee

50mm dia UPVC Coupling

50mm dia UPVC Elbow

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve/ Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

50mm dia Gun Metal Gate Valve

Easaneing the Doors & Windows removing and refining including Furniture fittings etc, complete,.

Engaging the following labours – carpenter, plumber, and helper – for fixing door and window fittings such as aldrops, handles, tower bolts, hinges, stoppers, locks, etc. Including toilet fittings such as taps, flushing tanks, pipelines, traps, wash basins, hoses, etc. All works shall be executed as per standard practice and under the direction of departmental officers.

Plumber-I Class

Plumber-II Class

Mazdoor -II Class

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap/ Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

15mm dia CP screw down tap

15mm dia CP Swan Neck Tap

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Upto 5 HP

Supplying and carrying out complete rewinding of a submersible pump/motor of approved make and capacity. The work shall include removal of the burnt winding, thorough cleaning and drying of the stator, rewinding with super-enameled copper wire of the original gauge and class, proper insulation with high-grade varnish, baking in an electric oven to ensure moisture resistance, and final testing for insulation and continuity. Rate includes material and shop charges for rewinding only and excludes dismantling, erection, and reinstallation at site.

5HP Submersible Motor

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing surface preparation and painting to existing 6 KL LMO vertical storage tank by removing rust and loose paint, cleaning and drying the surface, applying one coat epoxy/zinc rich primer and two coats PU paint of approved brand and colour, including scaffolding, safety measures, masking of fittings, and fixing of lettering, capacity marking, hazard symbols and logo stickering complete as directed by the Engineer-in-Charge.