SPECIAL REPAIR TO BUILDING NO. P-84/02, P-85/01 AND P-85/02 AT SANGRUR UNDER GE (SOUTH) PATIALA

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for providing mixing & applying two component Epoxy resin concrete bonding coat on prepared RCC surface as per manufacturer instruction including preparation of surface by chipping and throughly cleaning of surfaces complete all as specified and as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement in external surfaces WPC shall be mixed complete all as specified and directed. NOTE-WPC Shall be measured and paid Separately

M&L 10mm thick cement plastering in cement mortar CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls,applying one coat of primer over two coats of cement base paint all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls, applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceilings and applying two coats of white wash in complete all as specified and as directed.

Dismantling of brick work built in cement mortar incl all quoins, arches, pillar (in foul position) etc complete all as specified and directed.

M&L for Brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed (as in manhole).

M&L for brick work in cement mortar (1:4) using Fly ash bricks staight or curved on plan to any raidus but in half thick brick walls complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

All as per srl item hereinbefore but n. exc 1.5 sqm each complete all as specified and directed.

S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, complete as specified,size 105x 60mm complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish.

S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate,complete as specified,size 125x 60mm complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish. Cost of the same will be included in this item.

M&L for plain cement concrete (1:3:6) type C-0,using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed complete all as specified and directed.

S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified and directed.

S&F 300 mm long MS rat tail pattern spring hinge (helical door spring) including roller and roller plate, complete all as specified and directed.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. (d) Note:- For Cooler fixing arrangement 08 nos shutter Each window.(as per direction by Eng-in-Charge)

S&F Powder coated Aluminium anodised DG 102 "DECO" grill of size 100mm x 10mm x7mm thick, approved design for windows / ventilators with and including F/U channel, complete all as specified and as directed.

M&L for providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified and directed.

M&L for steel cup board shutter made out pressed steel frame of size 75mmx45mmx1.25mm thick with prressed steel shutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CP hanging rod of 20mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enemal paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as specified and directed. 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed.

S&F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mm fixed with wooden beds tinned tacks of wire staples complete all as specified and directed.

M&L for preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1using 20 mm graded crushed stone aggregates as in floors/paving in complete all as specified and directed.

M&L for ceramic tiles white 10 mm thick (square/rectangular) area of each tile n.exc 0.38 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 15mm thick screed beeding in CM 1:6 complete all as specifed and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles white of size 450X 300X 7mm thick thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.complete

M&L for Pre polished chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed.

M&L for Plywood (12mm th ) grade BWR ,type BB , fixed with screw to timber frame-work fixed complete all as specified and directed.

S&F Decorative type lamination type -1 of surface finish,colour and patern as approved including fix with approved adhesive (th of lamination sheet 1.5 mm.) complete all as specified and directed.

M&L for 30 mm ( width of flaps when open) cotinious (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

S&F Rim latch (75 mm of size) with two levers of mild steel body,stove anamelled finish with brass knob or lever handle and fixed complete all as specified and directed.

S&F extruded brass handles febricated type polished (size of handle 75 mm) complete all as specified and directed.

M&L for clean sawn timber framed and fixed in Second class Soft wood Scantlings as in Wall/Ceiling complete all as specified and directed.

M&L 2nd class softwood not exc 3 Sq cm Plain Fillets, square, Rectangular or traingular in sec ,clean swan ,Secured with nails or brads complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed.

Taking up or down steel tubing of size 15mm bore and removal to store complete all as specified and directed.

Taking up or down steel tubing of size 20mm bore and removal to store complete all as specified and directed.

Supply & laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supply & laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair Stainles steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as specified & directed. Note :- For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Dismantling of brick tiles or terracing tiles single layar on roofs complete all as specified and directed.

Demolation of mud puska on roof any thickness complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed.

M&L for PCC 1:3:6, type C-0 using 12.5 mm graded stone aggregates as in padding over roof ,minimum thickness at khurra as 25mm maintain a slope of 1:100 using water proofing compound complete all as specified and directed.

M&L for cutting grooves in brick wall ,75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in roof kerbs or mud stops/ coping etc including weathering slightly rounded or chamferred complete all as specified and directed.

M&L for providing and laying APP (Atactic polypropylene polymer) modified pre-fabricated five layer water proofing memorene 3 mm thick having weight not less than 3.60 kg/sqm black finished reinforced with non wooven polymer matt fix after applying one coat of cold applied solvant based bituminious primer @ 0,40 ltrs per sqm using botane torch and sealing all joint etc confirming to IS 3488 and cement plaster 15 mm thick in cm 1:3 all as per manufacturer instruction complete all as specified and directed.

M&L cement concrete tiles 25mm mm thick , type B-1 type (1:2:4) pointed in neat cement slury over 15mm thick sceed bed in CM (1:4) complete all as specified and as directed.

S&F mild steel work like Joist, channel, angle, or tee sections,fixed independently, without connecting plates,etc (cut to ordinary lengths i.e. with in 20mm of the length indicated. conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

S&F framed work as in doors or gates of angles or other section with gussets plate rails braces etc complete drill for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hook and hinges or steel hanging door fitting steel sheeting or other covering, running rails and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-O or Fe 310-O, including taking down old steel gate complete all as specified and directed.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed.

M&L for PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipes complete all as specified and directed.

M&L for PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints a complete all as specified and directed.

Dismanteling 500ltr water storage tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1 complete all as specified and directed.

S&F in repair 125mm Brass chromium plated shower rose with arms complete all as specified and directed.

S&F in repair CP stop cock concelled cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete all as specified and directed.

S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair Pillar taps hot and cold mixture Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure and fixed complete all as specified and directed.

S&F in repair wall mixer hot and cold mixture Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure and fixed complete all as specified and directed.

S&F in repair Angle stop valve/ Angle valve cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and directed.

S&F in repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed.

S&F in repair Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed.

S&F in repair Tubular towel rail, brass chromium plated 20mm dia, D type ,60cm long between flanges complete all as specified and directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair Viterous china ware wash down water closet Padestal petern with P trap including connection to flushing pipe, anti syphonage pipe complete all as specified and directed.

S&F in repair glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracketguard and ralling 60 cm long any size including fixing complete all as specifed and as directed.

S&F in repair Soap dish approx size 160x160x90mm any type including fixed to plugs with CP brass screw complete all as specifed and as directed.

S&F for 15mm bore Health faucet with CP felxible pipe of 1.25metre long incl making connection and fixed in position complete all as specified and directed.

S&F in repair 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed complete all as specifed and as directed.

S&F in repair PVC waste pipe 32mm dia complete all as specifed and as directed.

M&L PCC (1:3:6) type C-1 (using 20 mm graded aggregate) as in PCC path/ plinth protection 75mm thick. finished the surfaces even and smooth with out using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and directed.

M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded aggregate) as Chajja and the like complete all as specified and directed.

M&L for TMT bars 10mm dia and over mild steel as in reinforcement, cut to length bent to shape required including cranking and bending with MS wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for granite 20mm thick (of Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing complete laid over and including 15mm thick screed bed or bedding layer in CM(1:4) , in complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for Pre polished Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : in Steps Single piece only used

S&F mild steel powder coated peg set of 6 fixed to wall with steel screws complete all as specified & directed.

S&F stainless steel wall mounted kitchen wire rack of size 750mm X600mm X 250 mm as described and complete all as specified and specified.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and directed.

S&F cast iron 100mm sand cast vent cowl with cement joints bore with sand cast paper complete all as specified and directed.

S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F CI P & S trap with grating including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm Branch pieces, double/cross, T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm bore Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, suppyling and fixing in opening as per specification and drg complete all as specified and directed.

S&F for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 75mm complete all as specifed and directed.

S&F for 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

Demolition of cement concrete any description and any position not otherwise specifically provided (below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for providing 40 mm dia GI pipe medium grade spouts 50 Cm long complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, finshed flat rough finished surfaces etc. complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, finshed flat rough finished surfaces etc. complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

S&F in repair gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall .Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed. Note :- Serviceable fitting / fixtures will be reused in the work as directed.

Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M&L for taking down ceiling fan of any descrptions, servicing, rewinding, and complete repairs, painting of fan as required, fixing back for proper functioning, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M&L for taking down exhaust fan of any descrptions, servicing, rewinding, and complete repairs, painting of fan as required, fixing back for proper functioning, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M&L for taking down elect water heater of any descrptions, servcing and complete repairs of geyser as required, painting outer body, fixing back, connecting and testing the geyser for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and Including new rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) in wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, Including making good the disturbed portion of the wall complete all as specified and directed.

One light/fan point controlled by one 1-way switch complete all as specified and directed.

One 3/5 pin socket outlet, 5 Amp on independent board complete all as specified and directed.

One 3/5 pin socket outlet, 5 Amp on same board complete all as specified and directed.

One bell /buzzer point controlled by one push button on independent board complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and Including new rigid non metallic concealed PVC Conduit in wall, surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, Including making good the disturbed portion of the wall complete all as specified and directed.

Dismantling / Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed.

M&L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core 1100 volt grade drawn in and Including new rigid non metallic concealed PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed portion of wall complete all as specified and directed. Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length.

S&F in repair switch Modular type, 6 Amp, 240 Volts , one way complete all as specified and directed.

S&F in repair switch Modular type, 16 Amp,240 Volts , one way complete all as specified and directed.

S&F in repair socket outlet, Modular type, 6 Amp complete all as specified and directed.

S&F in repair socket outlet, Modular type, 6&16 Amp complete all as specified and directed.

S&F in repair bell push, Modular type, 6 Amp complete all as specified and directed.

S&F in repair fan regulator, modular type electronic step type complete all as specified and directed.

S&F ceiling rose surface bakelite two to three terminal 65x50 mm complete all as specified and directed.

S&F in replacement Tube light fittings LED type 1x20 Watt 4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable complete all as specified and directed.

Supply & fix LED bulk head ,10 W complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Bulb 9 watt 230 volt retrofit type complete all as specified and directed.

S&F in bell ding dong operating on AC 230 volt single phase complete all as specified and directed.

S&F MCB DB SPN 8 Way with acrylic double door complete all as specified and directed.

S&F MCB DB SPN 4 Way with acrylic double door complete all as specified and directed.

S&F in replacement including flushing in wall MCB distribution board vertical TPN 4 way 415 Volts AC double door type sheet steel phosphotised powder painted with bus bar neutral earth bar including provision of MCB TPN, FP 100 Amp conforing to IP 43 as incomer complete all as specified and directed.

S&F MCCB 4 pole 100 Amp 415 volt with breaking capacity of 16 KA complete all as specified and directed.

S&F in repair MCB SPN 240V 63 Amps C series 10 KA complete all as specified and directed.

S&F in repair MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and directed.

Taking Down the KWH meter along with wooden board/DB after removing all electrical connection complete all as specified and directed.

M&L for refixing & connecting the same KWH meter after complete repairs, wiring, elements& parts change as necessary for proper functioning complete all as specified and directed.

S&F Sheet metal enclosure factory made of size 20cm x 25cm x 12.5 cm deep box made out of 2mm thick ms sheet with double door with locking arrangement , epoxy power coated holes drilled for cable entries suitable for accomodating electric energy meter including brick/cement works as per site requirement includiing flushing the box in walll and making good the disturbed portion of wall /surface complete all as specified and directed.

Taking down old U/S LT UG cable of any size from trenches/pipe/floor/walls complete all as specified and directed.

Supply laying jointing cable XLPE insulated PVC shetahted strip wire armoured 1100 volt 3.5 core 35 sqmm multi stranded aluminium conductor laid in trenches/wall/ducts etcincluding necessary fixing arrangement such as cable lugs glands etc complete after removing/taking out extg unsv cable to the entire satisfaction complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr deep and n.exc 1.5 mtr wide getting out soil complete all as specified and directed.

M&L for returning filling in including ,spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed.

M&L for removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed.

Supplying & laying factory made unreinforced Pre cast concrete cable covers, class LV, type 1 flat of size 250 x 150 x 40mm laid in trenches as protection to cables complete all as specified and directed.

S&F in repair GI pipe of size 50 mm dia complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including PCC pit in PCC (1:3:6) type C1 cast iron frame 50 mm thick precast RCC 1: 1.5: 3) nominal mix cover slab reinforcedwith 8 mm dia mild steel deformed bar 15 cc and suitable handle of 10 mm dia round bar including necessary excavation earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 m and funnel with watering pipe, wire mesh, copper lugs etc GI protection pipe of size 15 mm bore including testing complete all as specified and directed.

Please Enable Macros to View BoQ information