Constt of Community Hall near play ground at Maha

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone 40 mm nominal size)

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone 20 mm nominal size ]

Providing and laying in position reinforce cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:1.5:3(1 cement: 1.5coarse sand:3 garded stone 20 mm nominal size ] in column, plinth beams

Reinforced cement concrete work in beams, suspended floors , roofs havingslpoes up tp 15degree landing balconies shelves, chajjas ,lintels,bands,plain window sills , stair cases and spiral stair cases up to five level including curing but excluding the cost of centring, shuttering , finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3garded stone 20 mm nominal size)

Providing and laying flooring coarse 50 mm thick with cement concrete 1:2:4(1 cement:2 coarse sand:4 garded stone )12.50 mm nominal size and curing complete

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth inclluding curing in cement mortar 1:6(1 cement: 6 coarse sand)

Extra for brick work withj commom burnt clay bricks / cememt concrete bricks in super structure above plinth level up to floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1cement:2coarse sand:4 graded stone agg. 12.5mm nominal size) and curing complete

Steel reinforcement for RCC work including starighting, cutting, bending , placing in position and binding all complete(TMT steel)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone agg.) 20 mm nominal size over 75 mm bed of dry brick blast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Filling available exacvated earth ( excluding rock) in trenches , plinth, sides of foundation etc not exceeding 20 cm in depth , consloidation each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Supplying and filling in plinth with fine sand under floors including watering , ramming , consolidating and dressing complete

12 mm cement plaster of mix1:6(1 cement :4 coarse sand)

15 mm cement plaster finished with a floating coat of neat cement of mix1:4(1 cement :4 coarse sand)

6 mm cement plaster of mix1:3(1 cement :3 coarse sand)

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

Lintel, Beams, plinth beams girders, bressumers and cantiliver

Edges of slab below 20 mm size

Providing wood work in frame of doors, windows,clerestory windows and other frames rot framed and fixed in position with hold fast lugsare with dash fasteners of required dia and length ( hold fast lugs are dash fastener shall be paid for seperately)

Sal Wood

Providing and fixing panelled or panelled and glazed shutters(30mm) for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately. 2nd class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for pannelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows using 4mmthick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws(second class deodar wood)30 mm thick

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 801itre/1 Osqm of approved brand and manufacturer

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture

Distempering with oil bound distemper of approved brand and manufacturer (two or more coats) on new work including priming coat of cement primer. (Asian/Nerolac)

Finishing walls with water proofing cement paint of required shade on NEW WORK

Anodised Aluminium handles 125 mm with plate 175x40 mm

AnodisedA!uminium handles 75 mm with plate 118x33 mm

Anodised Aluminium tower bolt (barrel type) 200 x1 0 mm

Anodised Aluminium tower bolt (barrel type) 1 00 x1 0 mm

Anodised Aluminium sliding door bolt 300 x16 mm

Oxidised mild steel hooks and eyes 100 mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.10.1).

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Refer CPWD DSR E&M 2018 Item No. 1.14).

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Parts

Providing and fixing of LED Lamp 16 watt.

Providing and fixing M.V. danger notice plate of 200mm x 150mm , made of mild steel, at least 2 mm thick , and viterous enamelled white on both sides, and with inscription in single red colour on front side as required.6 way(4+18) Double Door

Supplying and fixing angle/baten holder including making complete connections etc

Supply of Exhaust fanWall / Ceiling Fans 230V 50Hz celing fan with double ball bearing with low power consumption of following sweeps 1400mm ceiling Fan

Supply & fixing 25mm square core aluminium cable as req.

Carriage of materials from source to site of work .By avg lead

Sand + Bjri avg lead 07 km by m.t

Cement avg lead 06 km by m.t

Stone agg 40mm 07 km by m.t

Bricks 20 km by m.t

PURAN CHAND GOVT CONTRACTOR

M/S MOHD ASHRAF BANIA

ROMESH SINGH GOVT CONTRACTOR