Construction of 1540 MTs cap. Godowns (except roofing), CC road, Office block including E.I work. Safidon (District Jind)

Amount

P/F CP brass bib cock 15mm dia Jaguar make model No. 39307 complete as per DNIT

P/F CP brass angular stop cock 15mm dia Jaguar make model No. 39053 complete as per DNIT

Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account

WBM 3” thick compacted using 53 to 22.4mm stone metal laid in one layer complete in all respects as per PWD specification.

Supply of steel gates 6’X8’ size as per design & drawing of the Corporation.

Fixing of steel gates in gate size 6’X8’opening including cost of cement concrete 1:1½:3

P/F AC strips 40mmX6mm thick in flooring as per DNIT

Providing and fixing marble stone strips 13to 17mm x50mm in flooring derived rate as per DSR-2018

Providing and fixing kotah stone strips 20 to 25mmx50 mm in flooring derived rate as per DSR-2018

Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.

Providing and laying PVC socket 100mm dia for rain water pipe of ISI make

Providing and fixing finishing of surface using mechanical floater/ dic complete as per DNIT

P/F galvalume/Zinalume steel sheet verandah roofing 0.50mm thick (Total thickness) (only ±0.02 mm tolerance allowed) with tensile strength 550mpa, with coating mass @ 150gm/Sqm, of approved blue colour (RAL-5012) fixed self screw-sloping roof without curvature of TATA BlueScope , JSW Steel Ltd. , Dongbu Steel Co. ltd(Korea) & Bhushan power and steel Ltd. coating of 55% aluminium, 43.5% Zinc and 1.5% silicon as per IS code- 15961, 15965 and all other relevant Indian codes as per specification, drawing and design of the Corporation.

(ii) Extra for tinted glass complete as per DNIT.

P/F PVC floor trap 4" dia heavy complete as per DNIT

P/F Ms Square Pipe 40x40 mm frame for signage Board

Providing and fixing best Indian type steel grating/Jali complete as per DNIT.

Providing and fixing mosquito jali shutter as per DNIT.

Providing and fixing 3" dia PVC pipe complete as per DNIT.

Providing and fixing PVC flush pipe with adopter complete as per DNIT.

Supply and Fixing of Street Light 70 watt Crompton Make. (Havells/Crompton/Philips) complete as per DNIT

P/F of LED Bulb 15W complete as per DNIT (Havells and Philips, Syska)

P/F of LED tube light fitting 40 w 1X4’ with tube 40w(Havells/Philips complete as per DNIT)

S/E of ceiling fan 48” double ball bearing make (Havells,Fusion,Model/Areole new complete as per DNIT

S/E of exhaust fan 12” Fresh Air Heavy Duty (Havells,Crompton/Bajaj) complete as per DNIT

3- Pin Top-15 Amp (Anchor/SSK Make) complete as per DNIT

Bidder Name

Amount

Sandeep Nandal Construction Company(GSTN-06AMPPN1711N2ZQ)

Devender Aggarwal(GSTN-NA)

Gaurav Singh Contractor(GSTN-NA)

Gaurav Singh Contractor

Devender Aggarwal

Devender Aggarwal

Sandeep Nandal Construction Company