Renovation of Crew rest room in Kodumudi branch.

Dismantling and clearing away and carefully stacking materials useful for re-use for any thickness of walls a)Corrugated iron sheet

b)Door including remoal of frames and hinges

C)Brickwork

Supplying and erecting steel centering for sides and soffits of Reinforced Cement Concrete surfaces of following categories including strutting for 3.66m height using MS sheet of size 3'x2'(0.90x0.60) 10gauge stiffened with welded MS angle of size 25x25x3mm laid over silver oak of size 10x6.5cm spaced at 90cm c/c and supported by casurina props 10 to 13 cm dia spaced at 75cm c/c as directed by the corporation officers etc complete complying with standard specification

Supplying, fabricating and placing in position of Ribbed tar steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication.

Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four aggregates) using 20mm gauge hard broken granite stone jelly for RCC works excluding centering, shuttering and cost of reinforcement grills in position but including laying curing and finishing and also fixing clamps wherever necessary and as directed by the Corporation Officers etc., complete complying with standard specifications

Brickwork in cement mortar 1:5 (One cement, five sand )using good second class Chamber bricks of size 23x11x7 cm including curing, complying with standard specification.(Masonry projections to obtain elevation shall be done without extra cost ) For Super structure.

Supplying and Fixing UPVC (Un-plasticized polyvinyl chloride) open windows of casement type (open) the profile the size of outer frame 60mm x 45mm, shutters 60mm x 36mm,and upvc beading 16mm x 125mm and 100% corrosion free the profile and reinforcement with G i /7mm multi chambered sections with wall thick 2mm,. the EPDMrubber (black colour) covered with over all the edges of frame and shutters will be provided with espay multi power point loads and also it operates as handles.Radiations free pin headed 4mm clear glass should be provided , should have key ,lockable action ,security protective hinges ,strong loading systems.The window should be fixed to the wall with 100% packing with screw and silicon packing all round the frames. The rate includes Cost and Conveyance of all materials to work site with all Labour and incidental charges for the completion of work in all respects and Fixing the UPVC window in position with window UPVC frames as directed by the Corporation Officers etc., complete.

Providing and fixing casement doors fabricated from un plasticdized polyvinayl chloride (UPVC)sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be desined with all corner joints mitred and fusion welded.windows should be steel reinforced with 25x24x25xmmsteel reinforcement with a thickness of 1mm to have dimensional stability.The sash should be of 60x102mm. The mullion should be of 60x74mm. The profiles should have co extruded seals.hardware: All the hardware like friction stays , handles should be screwed with self tapping screws. The handles locks should be designed so that they cannot be released from outside.Glazing The window system should be glazed with 5mm plain float glass/ 6mmbison Iam . Installation : The profiles should be cut to length and welded 45 degrees.The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms eletroplated screws into plug.

Supplying and fixing in position of best quality of colour glazed earthenware Oriya type closet with P or S trap laid in position with 40mm brick jelly concrete and finishing the top to give requried slope and including giving connection to the CI or PVC pipes by dismantling masonry and redoing the same without any leakage as directed by the departmental officers etc complete