Repair and Maintenance of Agricultural Office Building at Kalpeni

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 metres and lift up to 1.5 metres

Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

Providing and laying cement concrete 1:4:8 (1 cement: 4 M sand: 8 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering and reinforcement for foundation and plinth

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Sheet

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m2

Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc ..complete 150 mm (10kg/sqcms)

Providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer G.I Pipe

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Painting with aluminium paint of approved brand and manufacture to give an even shade One or more coats on old work

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces including centering and shuttering in - (a) String courses, copings, bed plates anchor blocks, plain window sills and the like

Cold twisted steel reinforcemnt for R.C.C. work including bending, binding and placing in position complete

Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)

12mm cement plaster 1:4 (1cement :4 M. sand)

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work

110 mm nominal bore

Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc…complete 40mm thick with 20 mm nominal size stone aggregate

Providing and fixing brass tower bolt (barral type) with necessarys screws etc complete

Brass tower bolt 200x10mm

Brass tower bolt 250x10mm

Providing and fixing brass door latch with necessarys screws etc complete

Brass door latch 250x16x5 mm

Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete

Providing and fixing Bright finished brass casement stay with necessary screws

250 mm weighing not less than 280 gms

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent

Providing and fixing brass handle with necessarys screws etc complete.

Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete

Mohammed Abdul Latheef K P

MOHAMMED ALI AKBER P