Construction of 7.5 Mtr wid...

Amount

Providing and Fixing 100mm dia UPVC Pipe of approved quality as per direction of Engineer

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of MORTandH Specifications.

Providing laying, spreading and compacting graded stone aggregate to (250 mm) thick in two layers (125mm plus 125mm) wet mix macadam (WMM) Specification in two layers including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base /base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical clause 406 of MORT andH specifications.

Providing and applying tack coat with penetration grade bitumen VG -10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTand H Specifications.

Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTandH Specifications.

Providing and laying 80mm -100 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTand H specifications

SITC LED based smart Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy / Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer. The luminaire shall have in-built reciever for central control. The fixture should have high power single LED chip with ceramic base resulting in a minimum system efficacy of 135lumen/Watt and a minimum system lumen output of 16200 lumens and maximum system wattage of 120 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK )=08.The fixture should have an operating voltage range of 140-270 V, surge protection of )=4KV, PF )0.9 @ full load , THD(10% @ full load and SDCM(5. The luminaire shall have an additional SPD of 10KV. The fixture should be top openable and easy access to the Gear Compartment. The driver should be BIS approved, fully potted and en capsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V( plus /- 15V) and Auto Restart function should also be available within the fixture. The luminaire, it`s driver and SPD shall be of the same make/manufacturer. The fixture should comply with the parameters as per IS10322. Manufacturer shall have a in-house NABL Accrediated lab for type testing the luminaires as per IS-10322 and for LM79 test.

Providing and fixing SITC of feeder pillar with 100amp TPN MCCB as incomer along with timer, contactor. Outgoing 4 No`s TPN MCB 63amp/40amp complete in all respect.

Supply and laying of 25mm 4Core Alum. Armored cable loose in existing pipe or trenches complete with necessary connections.

Supply and laying of PVC copper conductor wire 4 core of size 1.50 sq.mm for LED light connection Approved make: Havells, Plaza, Ploycab, NEC, KEI.

Providing and fixing of decorative Double (2mtr both side)/ Single side ARM bracket (1mtr side) 40-50mm dia suitable for mounting of 9mtr Octagonal Pole complete in all respect.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical clause 503 of MORTandH specification.

Providing and Erecting demarcation pole (burjis) of 2 mtr height (1.5m above ground and 0.5m below ground), comprising of R.C.C. pipes NP2 class 200 mm dia with concrete foundation size 0.5x0.5x0.5m (1:2:4)and filling of pipe with Concrete (1:2:4) including the cost of Excavation, Transportation, erection and Painting two coats to the satisfaction of engineer in charge.

Bidder Name

Amount

R K JAIN INFRA PROJECTS PRIVATE LIMITED(GSTN-06AAGCR1240N1ZC)

Satya Parkash and Bros Pvt Ltd(GSTN-06AAHCS1210Q1ZA)

SHIVA BUILD TECH PRIVATE LIMITED(GSTN-06AAFCS2631B1ZW)

R K JAIN INFRA PROJECTS PRIVATE LIMITED

SHIVA BUILD TECH PRIVATE LIMITED

SHIVA BUILD TECH PRIVATE LIMITED

Satya Parkash and Bros Pvt Ltd