WBPWD/EE-I/CKHED/eNIT-81/24-25

Amount

Supplying only the following 1.1 KV grade PVC insulated A/Al. Cable as below: [Finolex/RR/Havells/Polycab] 4 core 95 sq mm.

Supplying only the following 1.1 KV grade PVC insulated A/Al. Cable as below: [Finolex/RR/Havells/Polycab] 4 core 25 sq mm.

Laying of cable above 4 core 90 sqmm and upto 3½ core 150 sqmm on wall/ surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of cable upto 4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 4 core 95sq mm.

4core25 sq mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 95 sqmm. [F5:8b(xvii)]

4 core 25 sqmm.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finoex/Havells/RR/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make-HMS/MMS), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch(Anchor Make) fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. laminated bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment,incl. painting the MS box and mending good the damages to original finish. Average run 10 mtr.

On Board

Supply & Fixing Socket type fan regulator (Step type)(Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making neccessary. connections etc. [E6:18a]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board fixing on surface of wall incl. S &F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex coverand making neccy. connections as required [E7:26]

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board fixing on surface of wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mmthick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Brand approved by EIC) on sheet metal switch board fixing on surface of wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mmthick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(NS)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Havells/Polycab/ RR) in 25/30mm size PVC Rigid Conduit 'FR' (Precision make-HMS/MMS) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. [ E14:1a(iv)]

2 x 36/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. [ E14:1a(iv)]

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. 2.5sq mm.

Supply & delivery of 450mm,(18''),rpm-1420,230volt,85Watt wall bracket Fan[EPC Make] comprising with 4nos blade, metal body, heavy duty fan complete with all accessories..

Fixing the wall bracket fan into the wall by fastnuts,screws etc as per direction of EIC.

Supply and delivery of commercial type indoor mounting retrofit rail for DOUBLE LED tube light frame complete with all accessories as required. [Make:(PHILIPS-TMC-501-P-2XT-LED-P3241)/Wipro ]

Supply and delivery of commercial type indoor mounting retrofit rail for Single LED tube light frame complete with all accessories as required. [Make:(PHILIPS-TMC-501-P-1XT-LED-P3241)/Wipro ]

supply & delivery of 240V, 20W,2100lm ,4Feet LED tube light. [Make:(PHILIPS-Essential)/Wipro ]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.(C-2/14/d)

Fixing only LED tube light fitting(single/twin) suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sqmm) flexible copper wire of 1.10mt. length. [C2:15]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.[C2/16]

Supply & Delivery of 48",1200mm,,230volt single phase AC ceiling fan (Brown in colour) inch. All acessories (blades,canopy,fork, rubber bush etc.) & the capacitor of the fan should be P-2 type burst proof & must have safety wire/rope directly from fan hook to stator of the fan ceiling. [make:crompton Riviera/Orient]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & fixing additional safety arrangement of ceiling fan by stranded GI strain wire of suitable gauge with one end fixed at RC clamp with special type of socket, nut-bolts, thimbles which throughly crimped with the strain wire and the wire passing through down rod (for upto 8 ft) and also other end connected with armature spindle by its existing jam nut hole with special arrangement (sample approved by EIC). The length of the strain wire up to 9ft also considering any type of work required i.e. enlarging the existing hole by file etc. to complete the job including installation as per direction of EIC (Static & Dynamic Load Test (in rotation of 1:20) .

Extra for supplying additional down rod ans 2x1.5 sqmm flexible copper wire for exceeding 30 cm incl. painting the rod with approved paint and making necessary connection as required

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages. [C3:27]

Supply & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D14:29]

Supply & delivery of (9''),rpm-1420,230volt,80 watt metal body heavy duty exaust fan[EPC Make] complete with all accessories.

Supply & delivery of (12''),rpm-1420,230volt,80 watt metal body heavy duty exaust fan[EPC Make] complete with all accessories.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4/28] 23 cm (9")

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 23 cm Exhaust fan (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 30 cm Exhaust fan (12").

Supply & Fixing of LED outdoor street light fitting arm header, complete with all access. to be projected from the wall of the building incl. making drilled holes & providing clamping arrangement & necy. GI reducer as required.with Supply & Fixing of 40 mm GI pipe (Make :TATA-Medium) 1.5 mts. average length having suitable bend & necy nuts/bolts etc to provide necy. arrangement to fix the whole clamp arrangement & S&F necy. length of 3x1.5 sqmm(Ph,N,E) PVC insulated single core multi stranded annealed copper wire and making connections as required and mending good damages to wall incl. necy. enamel oil painting etc as required. [C3:18]

S & F Moisture proof,water-proof (outdoor type) Syntex looping cable box size 200x160x100mm deep having 2/3 mm thick body enclodure comprising of one 240 V, 3/2Amp SP'MCB on din channel ('C'-curve,legrand/L&T make), with 4way copper terminal and having lined with rubber gasketed top cover should be fixed on wall by screws,nuts,washers etc, necy. socketting, rubber gasketted entry and exit as mending with proper finishing is required.

Supply & Fixing of LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device,manufacturer's warrenty should not be less than two(2) years. [Make:Philips BRP033 LED 100 CW SLR GR PSU SPD]240V,100W

Supplying only the following 1.1 KV grade PVC insulated A/Al. Cable as below: [KEI/RR/Havells/ Gloster] 2.0 core 10 sq. mm.

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core,upto 10 sqmm. [F4:7c]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 2 core 10 sqmm cable [F5:8b(xiii)]

Dismenteling the existing distribution boxes,wiring, Concealed switch board, Concealed type JB,Panel related all acessories light fixtures and fittings etc. and mending good the damages to the original finish by neat cement plaster cover with 1.5mm thick wall putty as existing wall matching as required.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

JISCO METALAS (BID ID -5786018)

D. PAUL ENTERPRISE (BID ID -5796484)