Tender for execution of work with material under M.W.(Con.) S.R. to Installation of High Mast for National Flag at Royal Palace Mandu

Supply of polygonal shape 15 mtr High mast pole with its accessories and fitted with LED 4nos attached to the shaft. Mast shaft shall be in three section, (5m each) made from H.T. Steel of grade IS 2062 grade E350 / BSEN10025,S355JO hot dip galvanised as per BS- EN ISO1461 and suitable for wind speed 180 km/hr as per IS 875(part III) It should also included acc. for high mast including head frame, two continuas steel wire rope 6mm diamete ( Grade AISI 316), minimum 45 mt long having Load bracking capacity minimum 2200 kg and wire rope for balance wt minimum 17 mt RMT ( 3 runs ) and 26 RMT (1run). Symmetrically and its control gear box, motor, manual operating handle, motor mounting plate, L staper , Lightening arrester , Junction box, including foundation acc. the mast shall have an integral power tools installed inside the base compartment for its operation. Luminaries wiring materials including in the mast supply price. Technical Specification. Bottom 500 mm, top- 150 mm plate thickness 3mm Top, middle 4mm and 5 mm bottom and 20 side polygons cross section of Mast . circumferential belts section only base plate and shaft size of opening and door at base is 1500X400 mm and diameter of base plate minimum 630 mm and its thickness minimum 30 mm with E-250grade of steel as IS 2062 .Minimum 8 Nos. foundation bolts and 750 mm PCD of foundation bolts required . The TS 600 mm type bolts of 25 mm diameter with 810 mm length of high ensile steel (600N/psqm ) grade foundation bolts. Cap details as per drawing. (fixed at Main Gate near Royal palace booking West side)

Transportation Charges of High Flag mast Pole with complete accessories etc. From Kolkata to Mandu

Erection of 15 m high mast with all acc with the help of suitable equipments or with the help of modern engineering

Provision for earth work in excavation as per design and drawing / site conditions or as directed by the EIC

Provision for PCC 1:2:4 as per design and drawing / site conditions or as directed by the EIC

"Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centring, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) "

Provision for providing reinforcement and as per bar bending schedule including black smith etc complete work

Provision for Centring and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Supplying and fixing double door MS feeder pillar box with near the high mast tower

Providing the following component (switching acc.) inside the fidder pillar including internal wiring all. Complete for automatic , timely OFF/ON for operating of (6 to 8 nos) 180 LED lighting fitting. i)63 A 4 pole MCB isolator 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no

Supplying and erection of Chemical Earthing Electrode Lighting protector made of copper 5 to 8 mm dia. Upto depth of 3m length with back fill etc complete.

Supplying and drawing 4 core 4mm pvc insulated and sheathed aluminium conductor armoured cable through under ground

Supplying and fixing 32A, 450 TPN main switch on iron frame on wall and making connection (Slandered make)

S & F 32A Kit kat fuse on wooden board

Supply of Indian National Flag 12X8 feet 100% Knitted polyester with reinforce super strong Nilyon Webbing on all three side and Rope /Toggle sleeve complete as per rebalent IS code

"Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. One face dressed "

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement Mortar 1:6

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. White Sand Stone

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-inˇ charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). section for raing for hallow tube 50mm.

Power cable 3 core copper 2.5 mm square reputed make

Provision for material and labour for PU painting on flag mast shaft over a coating of each primer coat etc.

Drone videographer/photography of event as and when required

Transportation Charges miscellaneous material as and when required