REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AND CONVERSION OF CHARPOY, GI PIPE NYLON NEWAR TO CHARPOY GI PLY TOP AT BSO (SOUTH), MIC and S AND CQA(V) UNDER GE(SOUTH) AHILYANAGAR

M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220

M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threaing at both ends and fixing all asspecified and as directed. FD-220

M&L for converting the unserviceable long rail obtained from item No 3.00 above into two short rail including cutting threading at both ends and fixing all as directed.

M&L for removing of unserviceable short rails of GI charpoy and converting the same in to two legs including cutting, threding at one end fixing all as directed. FD-220

M&L for removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighting not less than 1.50 Kg per charpy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

M&L for removing of unserviceable nylon newar from charpoy GI pipe, S&F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade making with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge (a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed Notes : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3mm thick 50mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer. Note: Make (Kitply, Greenply or Archid plywood or equivalent as approved by GE FD-220

M&L for removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge. FD-165M

M&L for removing unserviceable top from table dining ORs and S&F new Top made out of 18/19mm particle board including cover of 22 mm guage aluminium sheet as per specification shown on drawing and as directed. FD-165M

M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete. FD-1092

Rear legs

Front legs

Front/side rails

Stiffners

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.. FD-279/228/16M

Rear legs

Front legs

Rear/front/side rails

Stiffners

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-280, FD-250

Rear legs

Front legs

Rear/front/side rails/including cane hole

Stiffners

Back rest

Arms rest

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD -229

Rear legs

Front/rear/rails including cane holes

Side rails for seat including cane holes

Front /rear/stiffeners

Arms rest