Repair to hardstanding, interlocking and chequered tiles under the AOR of AGE(U) W/S-III and AGE(U) E/S-III area under AGE (I) (U) B/R Delhi Cantt-10

Amount

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L fo 75 mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate) as in sub base for interlocking all as specified.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block except tiles of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including dismantling of old serviceable tiles complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under floors or in foundations including spreading and levelling in layers n exc. 25 cm thick ,watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L fo PCC 1:2:4 type B-1 (using 20 mm graded agg) in kerbs, rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for cement concrete chequered tiles size of 20cm x 20cm x 20mm thick machine pressed ,set jointed with grey cement and pigment, and pointed in neat cement slurry in floors over 15mm thick in cement mortar 1:6 etc incl 25 mm thick PCC 1:2:4 type B1(20mm graded aggregate) all as specified and directed .

M&L for cement concrete chequered tiles except tiles size of 20cm x 20cm x 20mm thick machine pressed ,set jointed with grey cement and pigment, and pointed in neat cement slurry in floors over 15mm thick in cement morar 1:6 etc incl 25 mm thick PCC 1:2:4 type B1 including dismantling of old serviceable tiles (20mm graded aggregate) all as specified and directed

M&L for providing and laying at or near ground level factory made glossy finished kerb stone size 450mm x 300mm x 150mm of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6( 40mm graded aggregate) as in sub base for PCC flooring all as specified.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even & smooth using extra cement as directed complete all as specified and directed

S&F of glass dividing strips, 3mm thick, 38mm width inserted in position to confirm to design.

Dismantled of brick work built in cement mortar including all quoins,pillars etc but excl ashlar facing,dressed work and precast concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) except old bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 including complete all as specified and directed.

Removing mortar from cement or cement lime mortar and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

M&L for 15mm thick plaster in cement mortar 1:4 on brickwork or concrete surface of wall (External surfaces) finished even smooth complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surface of walls & apply two coat of cement base paint complete all as specified and as directed.

M&L for preparation of old treated surfaces of walls and applying one coat of cement base paint (approved quality and tint) using painting rollers complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M/s Vijay Enterprises

M/s Durga Traders

M/s SAAR ENGINEERS

SURESH KUMAR SHARMA & CO

HANUMAN BUILDERS

B. S BUILDERS

HIND CONSTRUCTIONS

garnet engineers contractors