SPECIAL REPAIRS TO OMQs AT AFS YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm for flooring using 3 mm thick spacer with epoxy grouting over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick matt finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L Glazed coloured Ceramic concept tiles of size 600 x 1200 x 10 mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M & L Non-skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as directed

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cocking plot forms and including 20mm thick cement mortar (1:4) including pointing in white cement ( tiles 20mm thick machine cut, bedded and ;jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone using marble dust with admixture of pigment to match including rounding and polishing to edges of granite slab complete all as specified and directed. .

Demolition of cement concrete (un-reinforced) in ground floor and paving n exc 15cm thickness (below or above ground level) all as specified and directed. .

M&L 75 mm thick cement concrete type B-2,1:2:4 (using 40 mm graded stone aggregate) for plinth protection complete all as directed and specified.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for thickness of slab 100mm below all as specified and directed.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM including all quoins all as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floor and paving RCC in any description and in any position all as directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L 10mm thick rendering using cement plaster in CM 1:6 on brick work or concrete surfaces of internal wall and surface is to be finished even & smooth without using extra cement complete all as specified and directed.

M&L 10mm thick rendering using cement plaster in CM 1:4 on brick work or concrete surfaces of external wall and surface is to be finished even & smooth without using extra cement complete all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonary all as specified and directed.

M& L for preparation of new wall surface applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per following steps complete all as specified and directed: (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of Oil bound emulsion distemper over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. by skilled labour as per following steps complete all as specified and directed:- Note: (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

M& L for new wall surface applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per following steps complete all as specified and directed. Note : (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

All as per Item No 24 above but on ceiling surface.

M&L for preparation of old decorated wall surface and applying two coat of White wash complete all as specified and directed.

M&L preparation of old decorated ceiling surface and applying one coat of white wash all as specified and directed

M&L Preparing old painted steel surface of any description over 10 cm width or grith and applying one coat of Synthetic enamel complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed

M&L preparation of old decorated surface by complete removal of existing treatment and applying one coat of texture paint of approved shade over one coat of primer over one coat of wall Birla putty complete all as specified and directed

M&L for Writing letters or figures (Block, Roman, italic or Indian) n exc 30 cms height etc. all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed.

S&F in repair gun metal globe gate valve 25 mm bore complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan One Piece EWC size 650 x 360 x 745 mm (pedestal Sigle pattern), with smooth action plastic seat cover, valve less symphonic action type flushing cistern with 300 mm dia trap fixing as per manufacturing instruction complete as specified and directed. Make : CAT No S1013142 S Trap 300 mm Make of "Cera" or equivalent make mentioned in PS

S&F in repairs Ceramic plain full pedestal wall hung type wash basin white/colour size 630 x 450 x290 mm height 820 cm and incl CP waste coupling, braches all as specified and directed . Make : CAT No -S2090101 Make of "CERA" or equivalent make mentioned in PS

S&F in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe of 15 mm dia bore complete all as specified. Make : FLR-5169NB of make "JAQUAR" or equivalent make mentioned in PS

S&F in repair CP Brass 3-in-1 wall Mixer with overhead and hand shower for hot and cold water screwed down for iron pipe of 15 mm dia bore complete all as specified. Make : FLR-CHR-5281N of make "JAQUAR" orequivalent make mentioned in PS

S&F in repairs 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Make : CON-CHR-083 FTK of make "JAQUAR" or equivalent make mentioned in PS

S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as directed and specified. Make : ARI-CHR-39053 of make "JAQUAR" or equivalent make mentioned in PS

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling all as specified and directed. Make : Nirali/ diamond/Blue star

S&F in repair sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make : FLR-CHR-5347N of make "JAQUAR" or equivalent make mentioned in PS

S&F in repair Towel Rack with lower hanger (stainless steel), fixed with screws, complete all as specified and directed. Make : Jaguar Code No AHS-1581 or equivalent make mentioned in PS

S&F PVC Cabinet mirror of size 600 x 450 x125 mm all as specified and directed Make : Prayag or equivalent make mentioned in PS

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site. Make : OHS-CHR-1719 of make "JAQUAR" or equivalent make mentioned in PS

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed. Make : SHA-CHR- 483 FTK of make "JAQUAR" or equivalent make mentioned in PS

S & F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed.

S & F of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as directed and specified. Make : AKP-CHR- 35711PS of make "JAQUAR" or equivalent make mentioned in PS

S&F Chromium plated corner glass shelf assembly of size 150mm X 150mm fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and directed. Make : ACN-CHR- 1121BN of make "JAQUAR" or equivalent make mentioned in PS

S&F Stainless steel Soap dish fix to wall all as directed and specified. Make : ACN-CHR- 1131N of make "JAQUAR" or equivalent make mentioned in PS

S&F Chromium plated corner glass shelf large of size 300x300mm fixed with Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified and directed.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. Make : ALD-CHR- 587 of make "JAQUAR" or equivalent make mentioned in PS

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified. Make :NIRALI ,Blue star, Prayag

S&F Stainless steel Toilet paper holder all as specified and directed. Make Jaguar Model AKP 35753P or equivalent make mentioned in PS

S&F in repair Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as directed and specified

S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as specified and directed.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc. complete all as specified and directed.

S&F Chromium Plated grating size 100mm fixed with white cement all as specified and directed.

S&F rotational moulded polyethylene water storage tank three layer 1000 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank complete all as specified and directed.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe or brass in repair complete all as specified and directed.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) complete all as specified and directed.

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms) complete all as specified complete all as specified and directed.

Taking down door chowkats or frames not exceeding 1.50 sqm each with shutters (without taking off shutters from the frame) of any description complete all as specified and directed.

All as per item No 75 above but exceeding 1.50 sqm but not exceeding 4.00 sqm complete all as specified.

M&L for taking down cupboard shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm all as specified and directed.

M&L for taking down shutters of any description exc 2sqm each and re-fixing in the same opening all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia all as specified and directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

All as per item no 79 but double extruded WPC of Frame size 50 x 125 mm

M&L for cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet complete all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed.

Supply and fixing factory-made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F 35mm thick 2 nd class Hardwood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers. edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.

S&F Brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed.

S&F for extruded brass handle 150mm fabricated type polished complete all as specified and directed.

S& F for Mortice latch 65 mm length with two levers (vertical type), brass body and fixed all as specified and as directed

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed.

S&F Brass 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F sheet black tinted glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed

All as item 95 above but figured glass pin head type of 4mm thick complete all as specified and directed.

S&F sheet black tinted glass ordinary quality 4mm thick as in doors, window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neo prime gasket complete all as specified and directed

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290. Gde-E-165 complete all as specified and directed

M&L preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide primer to steel surface all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete all as specified and directed. Note: Bracket will be measured and paid separately

S& F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing Each opening shall have two fillets at both ends complete all as specified and directed

M & L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and prelaminated side with different design and other side plain white of density not less than 600kg/cum the 18mm board should be 100% lead free, water proof, termite proof and moisture/weather proof and good screw holding capacity and complete all as specified and directed.

S&F SS Basket 48 cm x 50 cm x 10 cm complete all as specified and directed

S&F SS Basket 48 cm x 50 cm x 15 cm complete all as specified and directed

S&F SS Basket 48 cm x 50 cm x 20cm complete all as specified and directed

S&F for 110 mm long stain less steel 2-hole Self closing hinges complete all as specified and directed

S&F for stainless steel size 200 mm long D type rounded type drawer wardrobe handle complete all as specified and as directed.

S & F for stainless steel size 300 mm long D type Square shape wardrobe/door handle complete all as specified and as directed.

M & L for stainless steel size 1000/900mm x 40mm x 40 mm oval type hanging rod with end brackets for cupboard (weight not less than 370 g) complete all as specified and as directed.

S&F for 600 mm long telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed.

S&F magnet catch of approved qualities 75mm size complete all as specified and directed.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase including rounding and polishing to edges of granite slab complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 including rounding and polishing to edges of granite slab complete all as specified and as directed.

Supply and fixing stainless steel (Grade 304) frame work for railing as required size in horizontal/vertical members of stainless steel pipe, including dismantling the existing MS hand rail as in staircase and balcony complete all as specified and as directed.

M&L for Writing stops, commas, short lines dashes, hyphens, brackets, etc. all as specified and directed.

M&L preparation of old decorated ceiling surface and applying one coat of white wash all as specified and directed

M & L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in shelves complete all as specified and directed.

M&L TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking spirally for hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface etc complete all as specified and directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- supply only of water proofing compound will be measured and paid separately

Supply only approved integral water proofing compound all as directed. Make : Complast x 421 IC of M/s Foroc Chemical (India) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M & L for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the rolled either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non-woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system.

S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 24"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self-tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50 mm dia all as specified and directed.

Taking down the unserviceable point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling roses, pendent regulators, sockets etc any light points and making good disturbed surfaces of walls and floors etc. complete all specified and directed

Taking down unserviceable DBs, with MCBs and Main switches, etc., complete all specified and directed

Taking down ceiling fan, dismantling blades and removing fan and re-fixing ceiling fan after completion of re-wiring, and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed

Taking down Exhaust fan, dismantling blades and removing fan and re-fixing Exhaust fan after completion of re-wiring, and connecting up including provision of cable from ceiling rose or connector to fan complete all specified and directed

M & L for Painting of Ceiling and Exhaust fans complete, in site with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all specified and directed

M&L for point wiring complete with 1.5 sqmm (nominal cross-sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concealed conduit in existing brick/stone wall for concealing conduit and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for the following complete all as specified and directed:-

One light point controlled by one 5 Amps switch

One ceiling fan/Exhaust fan controlled by one 5 Amps switch

One socket 5 amp on independent board

One socket 5 amp on Same Board with other switches

One Bell Point controlled by one Bell Push

One light point controlled by two 2-way switch of 5 Amps

All as per item No 130, above but wiring with 2.5 sq mm FRLS copper cable including earth continuity conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch. Note for item No 130 to 131: (a) The flush metal box and cover plate with frame for fixing modular switch/socket/regulator etc shall be measured and paid seperately. (b) Cutting chases for routing conduit and making good as per the exisitng where ever necessary shall be measured and paid seperately.

M&L for point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS grade cable ISI marked in and including PVC casing capping of suitable size medium grade ISI marked complete including 1.6 mm thick CI/pressed steel terminal switch boxes flush mounting type with plastic laminated sheet cover of 3.0 mm thick for fixing switch / socket/ regulator etc, including earth continuity wire of PVC insulated unsheathed 1.5 Sqmm (nominal cross sectional area) FRLS copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following complete all as specified and directed:-

One light point controlled by one 5 Amps switch

One ceiling fan controlled by one 5 Amps switch

One socket 5 Amp on independent board

One socket 5 Amp on same board

M&L for point wiring complete with 2 run of 4.00 sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including rigid PVC conduit not less than 20mm dia and conduit accessories fixed to walls / roofs / floors / ceiling etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor FRLS 4 sqmm for earth continuity conductor and connected to common earth dolly for 20 Amps Metal clad socket complete all as specified and as directed

S&F in repair switch piano 5 Amps flush type one way complete all as specified and as directed

S&F in repair socket outlet 2 in 1, 3 pin, 5 Amps flush type complete all as specified and as directed

S&F in repair fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts complete all as specified and as directed

S&F in repair Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and as directed

S&F in repair Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and as directed

S&F in repair Modular Bell push 6A 1 module type, 230 volts, ISI marked complete all as specified and as directed

S & F in repair Modular type stepped type electronic fan regulator 2 Module 230 Volts complete all as specified and as directed

S&F in repair modular type Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed

S&F in repair modular type Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed

S&F in repair Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed

S&F in repair Bell ding dong AC 230 V complete all as specified and as directed

S&F in repair modular white cover plate with frame, 1 module ISI marked

S&F in repair modular white cover plate with frame, 2 module ISI marked

S&F in repair modular white cover plate with frame, 3 module ISI marked

S&F in repair modular white cover plate with frame, 4 module ISI marked

S&F in repair modular white cover plate with frame, 6 module ISI marked

S&F in repair modular white cover plate with frame, 8 module ISI marked

S&F in repair modular flush metal box 1/2 module ISI marked

S&F in repair modular flush metal box 3 module ISI marked

S&F in repair modular flush metal box 4 module ISI marked complete all as specified and as directed

S&F in repair modular flush metal box 6/8 module ISI marked complete all as specified and as directed.

S&F in repair ceiling rose, three terminals, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including dismantling old unserviceable fittings complete all as specified and as directed

S&F in repair round/square shape 15 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S&F in repair LED light fitting 10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repair building security light LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection complete all as specified and directed

M&L for sub-main wiring with two runs of 6 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor in and including suitable PVC Conduit with 6 sqmm copper earth wire after taking out the existing sub-main wiring, etc. complete all as specified and as directed Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three Run of 6 Sq mm and PVC conduct is measured as one Run or one Meter.

M&L for Sub main wiring complete with two runs of 2.5 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non-metallic rigid PVC white conduit and conduit accessories concealed /fixed to walls/roofs/floors etc.., and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 2.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed Note:- Two run of cable and one run of earth wire and PVC conduct is measured as one length. Three Run of 2.5 Sq mm and PVC conduct is measured as one Run or one Meter.

S&F in repair Sheet metal enclosure double door MCB DB SPN 16 way with 200 A rated bus bar & neutral link complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed

S&F in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed

S&F in repair single pole and neutral enclosure with a two pin and earth plug socket complete with one single pole MCB of 20 Amps complete all as specified and as directed

S&F in repair MCB Single pole and Neutral, 230 volts, 6 to 32 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed

S&F in repair MCB Single pole and Neutral, 230 volts, 40 to 63 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed

S&F in repair MCB Single pole, 230 volts, 6 to 32 Amps, 'B' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed

M&L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick buried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts, nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc complete all as specified and directed

M & L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

S&F in repair exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed

M & L for provision of hole on the wall for fixing of the exhaust fan of size 250mm of sweep and connecting with the ceiling rose complete all as specified and directed

Supply and fix in repair Meter panel board of suitable size to accomudate the following accessories made out of 14 SWG (2.0 mm) CRCA sheet powder coating for load bearing member & non load bearing member with aluminium busbar 300 Amps with colour coded heat shrinkable PVC sleeve and support with current density 1 sqmm, including all internal wiring will be done with PVC insulated copper of suitable size, space for single phase energy meter 6 Nos, including MCBs four pole 63 Amp - 01 No as incomer and MCBs SPN 40 Amp-05 Nos as a outgoings including taking old unserviceable meter board with connected items complete all as specified and directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth complete all as specified and as directed

chowdeshwariconstructionco (BID ID -3106570)

SRI AYYAPPA ENTERPRISES (BID ID -3121250)

EURO ENTERPRISES (BID ID -3106511)

Lakkaiah Rangaswamy (BID ID -3107926)

SRUSHTI CONSTRUCTIONS (BID ID -3108116)