Repair and Maint to Security lights, Watch tower lights, internal electrification system and connected works at Baddowal and Moga Under AGE E/M, GE Ludhiana.

Amount

Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittingS&F, ixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet top cover fixed with nickel polished screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point controlled by one switch SP one way.

All as per srl item No. 2 here in before but for one fan point controlled by one switch and regulator complete all as specified

All as per srl item No. 2 here in before but for one bell point controlled by one bell push complete all as specified.

All as per srl item No. 2 here in before but for one light point controlled by two way switches complete all as specified.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on independent board complete all as specified.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified.

All as per srl item No. 2 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 1.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F, switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F, switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F, switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F, socket out let 5 Amp, 5 pin flush type complete all as specified.

M&L, Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified.

S&F, Bell push switch flush type 5 Amps, SP, 240 volts complete all as specified.

S&F, Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

S&F, for batton holder insulated body all as specified and directed.

Supply & fixing in repair LED retrofit lamp 9 W (TU) 6500K, 220-240v, B-22 base cap.

S&F, for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified.

S&F, five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceablve regulator all as specified. Make for srl item No 9 to 16 and 18 to 19 : Havells (Reo)/SSK (Top line OR Touch)/Anchor (Penta).

S&F, 18/20 watt LED (4 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 20W LED tube rod (4ft) including taking down existing light fittings complete all as specified and directed by Engr - in - Charge. Note : (i) Contractor shall be provided 2 years written manufacture's guarntee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

S&F, 10 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed by Engineer-in- charge.. Note : (i) Contractor shall be provided 2 years written manufacture's guarntee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

S&F, 5 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed by Engineer-in- charge. Note : (i) Contractor shall be provided 2 years written manufacture's guarntee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Supply & fixing LED 18W stellar pro round down light PDC aluminium housig downlights corona series warm white color including taking down existing light fittings etc complete all as specified and directed by engineer in charge.

S&F, in repair energy saving bulk head luminaries with opal diffuse LED 10 watt 6000 K power factor more than 0.90 IP-65 class-I protection with high efficiency Led electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired products must be made in India only connection and testing complete all as specified. Note : (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

M&L, Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified. Note : PVC conduit shall be measured and paid separately.

M&L, Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified. Note : PVC conduit shall be measured and paid separately.

M&L, PVC rigid non metallic conduit fire proof medium grade ISI mark 25mm dia surface or concealed including conduit accessories such as tee, elbow ,bend junction box complete all as specified. Note : Cutting chases shall be measured and paid for separately.

M&L, cutting chases for concealed conduit wiring and making good in cement mortar 1:3 , cutting of girth suitable to accomodate 25 mm bore wiring conduit pipe including finishing of disturbed surfaces as per existing adjoining specifications , complete all as specified.

M & L for DB's 4 way TPN double door with bus bar of 200 Amps rated per fitted with MCB,and MCBs SP 6-32 Amps 10KA (as per site requirement) in outgoing circuits complete pre fitted and prewired with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified.

M & L for replacement TPN MCB, 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 16 to 32 Amps complete all as specified & directed by Engineer-in- charge.

M & L for replacement TPN MCB, 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 40 Amps complete all as specified & directed by Engineer-in- charge.

M&L for sheet metal DB for MCBs, SPN, 8 ways, double door,singal phase, IP-43 company painted with 200 Amps rated bus bar, neutral bar/ connectors, each bar/ connectors, prewired complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc complete all as specified.

All as per srl item No. 32 here-in-before but of size 4 ways complete all as specified.Note for srl item 32 and 33 :- MCB,s SPN & SP shall be measured and paid for separately.

M&L, MCB SP 6 TO 32 Amps, 10 KA, C-curve complete all as specified.

M&L, MCB SPN 32 Amps, 10 KA, C-curve complete all as specified.Make for Srl item No.29 to 35 L&T/Standard/Havells/Indoasian

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 6 Sqmm 2 core.

S&F, energy saving recess mounting deep drawn LED luminaire, 34/36 watt, 6000K suitable for false ceiing of size 60cm x 60cm, having power factor more than 0.90 IP-20 class-I protection with efficiency LED electronic driver BIS approved surge protection 2 KV (minimum), operative on 140 volts 270 volts AC supply, products must be made in India only, complete prewired, connecting and testing complete all as specified and directed.

Supply & fixing LED post top lantern 40W e-top with aluminium die cast housing cum heat sink with PMHA diffuser in IP 65 including taking down existing light fittings etc complete all as specified and directed by Engineer-in-Charge.

S&F, Energy saving Medium bay LED luminaire, environment friendly vertical type with high power COB (LED) as light source 50 watt,5000K with optics of general spread type suitable to hang from roof,complete all as specified.

M&L for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 30 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacturer's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 Report of NABL accredited Laboratory from manufacturer's. (iii) Make for Srl item No.17,20 to 24 & 37 to 40: Havells/Crompton/Philips/Bajaj or equivalent as per PS

Supply only insulation LT tape size normal width 20mm Length 25 Mtr Thickness 0.125mm

Taking down existing street light fittings of any type/size/capacity fixed in any position i.e. on wall/ pole/ watch tower fixing the fitting in its original position after repairs complete all as specified and directed. (Note:-Spares shall be measured and paid seprately)

S&F, in replacement LED street light luminaire of 45 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure Indian brand only.

S&F, LED in replacement street light luminaire of 60 watt in epoxy powder coated pressure die-cast aluminium housing of size 370mm x 230mm x 72 mmwith 5% tolerance, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver, of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) make Osram/Nishia/Cree with colour temperature 5700 K(max) and with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt including taking out old light fitting of any type all as specified and directed. Brand name should be embossed on fixture to ensure Indian brand only.

S&F, in replacement LED street light luminaire of 90 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure Indian brand only.

S&F, LED flood light fitting of 120 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 3000 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed.

S&F, LED flood light fitting of 150 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 3000 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed.

S&F, LED flood light fitting of 200 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 3000 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed. Note for Srl No. 43 to 48 :- (i) All LED fittings shall have supporting LM-79 & LM-80 test certificate from govt approved NABL accredited Lab showing all the parameters duly signed by the local office bearer of manufacturer. (ii) All LED fittings shall have 2 years written Warranty from local office bearer of manufacturer. Make:-Crompton/Havells/Bajaj/Philips or equivalent as per PS

M&L, GI pipe medium grade 40mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS clamp of size 40x6mm for fixing of street light fitting complete all as specified and directed.

Supply and fixing 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 2 x 1.5 Sqmm and 1 x 1.5 sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed by the Engr-in-Charge.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 2 core.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 4 core.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 2 core.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 4 core. Note Srl Item No.51 to 55 Make: Havells/ Paragon/Polycab/CCI/KEI.

Excavation in trenches n. exc. 1.5 metre wide for foundations, laying cables and similar works n. exc. 1.5 m deep and getting out in soft/ loose soil complete all as specified & directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L, sand cushioning for under ground cable 23cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified and directed by Engineer-in-Charge. Note: Thickness of 18 Cms after punning shall be considered for payment.

M & L, brick protection with old size sub class 'B' bricks laid flat across the route of underground cable all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 20W/45 watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 60watt/150W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 20watt/45W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 60watt/90W complete all as specified and directed by Engineer- in-Charge.

S&F, junction box made out of steel of size 300x300x150mm complete with 100 Amp 3 phase & one netural rated aluminium bus bar with MS clamp of size 35x6mm MCB single 6 Amps inside box and fixed on pole with MS clamps, nut bolt and washers as specified and directed by EIC.Make ;- sintex/hensal

S & F in replacement MCCB 63 Amps, 4 pole, with adjustable thermal adjustable magnetic release, ICS=ICU=100%, 415 volts, 50 HZ, 25 KA complete all as specified & directed by Engineer-in- charge.

S & F in replacement MCCB 100 Amps, 4 pole, with adjustable thermal adjustable magnetic release, ICS=ICU=100%, 415 volts, 50 HZ, 25 KA complete all as specified & directed by Engineer-in- charge.

S & F in replacement TPN MCB, 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 63 Amps complete all as specified & directed by Engineer-in- charge.

S & F in replacement MCB SPN , 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 10 to 63 Amps complete all as specified & directed by Engineer-in- charge.

M&L, MCB SP 6 TO 32 Amps, 10 KA, C-curve complete all as specified. Note Srl Item No.66 to 70 Make: Schneider / Legrand /L&T /Indoasian (Optipro)/Havells/standard

Supply and fixing Automatic Street Light Switch using Nature switch for automatic switching of street lights based on LUX level of Natural light. The Infrared Sensor based Nature Switch along of capacity of 5 KW, three phase, with suitable Power Contactor(AC 3) 20-32 Amps and MCBs SP (Input-Output) 32 Amps on each phase at incoming and out going connections fully enclosed in pole/wall mountable enclosure, weather and vermin proof having front hinged shutter, rust proof, termite proof and FR grade SMC junction box having to IP 54 protection, pre-wired complete with suitable wire PVC insulated FRLS type copper conductor with suitable copper thimbles/lugs etc complete all as specified and directed. Make of Nature Switch : Kakatiya Energy Systems Pvt Ltd Hyderabad/ Bajaj/Healer. Make of Contactor : BCH/L&T/Schneider. Make of MCB : Hager/Schneider/L&T/BCH. Make of copper wire : Finolex/Polycab/RR Kable. Make of junction box : Sintex/Schneider/Rittal

M&L, painting of lt Steel tubular pole any type of size externally above foundation with two coat of almn paint over a coat of red oxide primer after scraping/cleaning well the existing surface incl painting of bottom with black white or yellow color strip 30cm each upto 1.5 mtr high from top of PCC foundation block and numbring of pole with synthetic enamel paint white in 80mm high letter over 150mmx230mm yellow base complete.

Supply and fixing galvanised pipe light grade of ISI marked 50 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.

M & L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.

UNITED ENGINEERING CORPORATION

JASSI TRADERS

R D Bansal

PREM CONSTRUCTION COMPANY

Kular and Company

R K ENTERPRISES