PROVN OF B VEH TEMP SHEDS FOR 30 TSTs AT SIG GP ANAND PARBAT UNDER GE NORTH DELHI CANTT-10

Amount

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material exc. 500m and n exc. 1000m and depositing where directed complete all as specified and directed.

M&L for RCC in fdn incl raft, footings , foundations base for column Plinth beam etc all as spd in cement concrete M-25 Design mix using 20mm graded stone aggregate complete all as specified and directed.

M&L for RCC for column etc all as spd in cement concrete M-25 Design mix using 20mm graded stone aggregate complete all as specified and directed.

M&L for RCC for Beams lintals over 1.50 mtrs span etc all as spd in cement concrete M-25 Design mix using 20mm graded stone aggregate complete all as specified and directed.

S&F rolled mild steel Fe-410W (Gde-E-250) quality 'B'Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed.

M& L for 10 mm dia and above deformed or twisted bar cut to length bent to shape cranking bending and binding with 0.9 mmdia wire etc complete all as spd

M& L for 5 mm dia and above deformed or twisted bar as in stirrups cut to length bent to shape cranking bending and binding with 0.9 mmdia wire etc complete all as spd

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating coloured GI based Plain steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. Note: Roof sheets having guard film to be fixed through authorised agent of manufacturer. Sheets to be procuered directly from Manufacturer complete all as specified and directed.

M & L for providing precast cement concrete type B1 (1:2:4) block masonary with solid blocks exc 10 cm in with and set in CM (1:4) all as spd and directed

M&L for hard core of gauge n.exc.63mm hand broken stone deposited,spread and levelled in layer n exc.15cm thick watering and rammed to a true surface complete all as specified and directed.

S F for Hand rails, half round or other stock section or core for wooden hand -rail straight portion, drilled and countersunk for ballusters, nosing to steps including embeding in concrete and screwing etc. Wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or riveting etc. and similar work confirming to Fe -290 Gde E-165 complete all as specified and directed..

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consoilidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 grade with Grey cement and pigment complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Rolling and consolidating formation surfaces with power road roller of 8 to 12 tonnes complete all as specified and directed.

Rolling and consolidating of brocken boulders not exc 15 cm thickness with power road roller of 8 to 12 tonnes complete incl watering and levelling all as specified and directed.

Returning filling excavated earth inn watering and well ramming in layers n exc 25 cm In soft loose soil all as spd

S&F Rough finish surface Form work to side of concrete fdn , base of columns,footings, raft or raft beam,plinth beam and similar work all as spd and dir.

S&F Rough finish surface Form work to sides and sofits of floor , roof beams and similar work all as spd and dir.

S&F Rough finish surface Form work to sides of pillars, posts etc and similar work all as spd and dir.

M&L Brick work with sub class "B" brick in CM (1:6) straight or curved on plan all as spd

M&L rendering in CM (1:6) finished even and smooth without using extra cement..

M&L two coats of cement base paint over a coat of primmer all as spd

Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, for light/fan point PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc complete all as specified and directed.

Description all as per item No 28 above but with using 2.5 sq mm PVC insulated multi-stranded copper conductor for independent switch socket outlet 6 pin 5/15 Amps and incl 2.5 sqmm PVC insulated multi-stranded copper conductor single core as earth continuity conductor wire duly connected to all common earth point, drawn through 20mm dia PVC conduit in any length all as directed at site, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps single pole one way 230 Volts,ISI marked, complete all as specified and directed.

S&F Switch piano flush type 15/16 A single pole one way 230 Volts, complete all as specified and directed.

S&F Socket Outlet 2 in 1 3/6 pin 5 and15 Amp flush type 230 Volts, complete all as specified and directed.

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete, complete all as specified and directed.

M&L for sub main wiring with 6 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through conduit including 6 sqmm (nominal area) single core PVC insulated mulistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as specified and directed.

Supply and fixing loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double door, 415V AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB, 63 Amps as incomer and MCB, SP as out going all as specified and directed.

S&F MCCB, 3 pole, 415 volt AC, 63 Amps, fixed type with breaking capacity 16 KA suitable for load line DB all as specified.

S&F sheet metal enclosure DB 8 way, Single pole and neutral with 200 Amps rated bus bar 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & arrangements, all as specified and directed.

S&F MCB, TPN, 415 volt AC, 32 to 40 amps, fixed type with breaking capacity 16 KA suitable for load line DB all as specified.

S&F MCB, DP, 240 volt , AC 6-40 Amps of breaking capacity 10 KA C curve of sizes.

S&F MCB, SP, 240 volt , AC 6-40 Amps of breaking capacity 10 KA C curve.

S&F surface mounted type LED panel type 34 watt 4ft x 1ft complete with module, driver and all accessories 3 core copper wire for connection complete all as specified and directed. Note : - Hanging arrangements with steel conduit (02 Nos ) of suitable size of required height including clamps etc required are inclusive in quoted rate.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised iron wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as directed.

Supply and laying, testing and connecting in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core, laid in trenches or fixed to pole/wall, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5m depth for laying under ground cable/pipes in loose/soft soil, complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for sand cushioning for protection of cables with screen wash river sand and punning to proper required cover, complete all as specified and directed.

M&L for bricks of sub class 'B' bricks, for cable protection in trenches laid dry and flat, complete all as specified and directed.

M&L for steel tubes, light grade galvanised 50mm bore laid in trenches/walls and spreding for cable cushioning/protection all as specified and directed.

M&L for cutting of road/path for laying of GI tubing and making the good to disturbed road/path including provision of PCC 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and directed.

Rough excavation n.exc 1.5 mtr deep and getting out.

Spreading and leveling in layers in n.exc 25 cm thick and add for well remming including watering as required.

Shivom Projects Private limited

Bhasin Construction Co

SANJEEV ENTERPRISES

Leo Network power systems

M/S Chhavi Constructions Co

V r traders

M/S SURINDERAS CONSTRUCTION CO.

Arun Construction Co.

M/S Parshant Associates