COMPREHENSIVE MAINT OF BR, EM FURNITURE AND WELCOME MAINTENANCE WORKS IN KANYA, SWATI AND MEENA BUILDING UNDER GE NOFRA, COLABA, MUMBAI

Amount

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminum hinges device complete connecting to P or S trap all as specified and directed.

S&F in repairs PVC Valveless, syphonic action type, flushing cistern low level all accesories complete all as specified and directed.

S&F in repair vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concrete complete all as specified and directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size) from wooden/aluminium frames glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each .

Resecuring or easing & adjusting without taking down shutters of any description but exc 1 sqm and n. exc 2 sqm

S&F in repairs stainless steel butt hinges medium weight of size 100mm complete all as specified and directed.

S&F in repairs stainless steel butt hinges medium weight of size 75mm complete all as specified and directed.

S&F in repairs Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed.

S&F in repairs Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F in repairs 300mm size aluminum sliding door bolt with hasp and staple complete all as specified and directed.

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish any floor incl Scafolding,complete all as specified and directed. (Note after painting, cleaning of all floors, glass & furniture by own arrangement).

All as item No 16 above but on ceiling complete.

Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note after painting cleaning of all floors, glass & furniture by own arrangement).

All as item No 18.00 above but on ceiling complete.

M & L for 2-3mm thick wall care putty on wall as per manufacture instruction complete all as specified and directed by Engr-in-Charge.

M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.

M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.

M&L Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.

Taking down existing cement or cement lime plaster and preparation of surfaces of walls of any description incl racking out joints backing for scrubbing down with water and removing debris out side MD land.

M&L for Rendering, 15 mm thick cement plaster 1:4 on brick work/concrete surface finished even and smooth with out using extra cement.

M&L for Rendering, 10 mm thick cement plaster 1:4 on brick work/concrete surface finished even and smooth with out using extra cement on ceiling.

M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufacture instruction with smooth roller finish complete all as specified and directed.

All as item No 27.00 above but on ceiling complete.

S&F in repairs 15mm CP pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe all as directed.

S&F in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed with and including Ilnd class hard wood beading complete as specified and directed .

S&F in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed to aluminium beading and rubber bearing Vent/window complete all as specified and directed. (cost of aluminium beads and neoprene included in relevant item of aluminium window & Ventilators).

S&F stainless steel CP toilet paper holder fixed to walls in repairs with chromium plated brass screws complete.

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed.

S&F in repairs Kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe etc Complete all as specified and as directed.

S&F in repairs plastic water closet seat covers standered closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT

S&F in repairs PVC cabinet mirror of size 300 x 450 mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 900X580X210 mm fixed to wall with screws complete all as specified and directed.

S & F in repair decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved quality specified.

S & F in repair CP soap dish wired type complete all as specified and directed.

S & F for night latch seven levers suitable for doors in repairs complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.

S&F in repairs of 32mm dia PVC (flexible) waste pipe 900 mm long complete all as specified and directed.

S&F in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed in repair complete

S&F in repairs of 38mm dia PVC (flexible) waste pipe 900 mm long complete all as specified and directed.

S&F in repair 38mm dia brass chromium plated waste coupling for kitchen sink fixed in repair complete

S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew complete all as specified and directed.

Supply and fix in repair 100 mm dia CI nahani trap jointed with run lead and making good to floor with existing tile.

S&F 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed.

S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed .

M & L for Preparation of existing mosaic cement tiles flooring and polishing with machine/hand to surface and pointing of joints to match the colour complete all as specified.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L Glazed ceramic tiles in vertical surfaces of size 300x200mmx7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Marble Baroda green 18 to 20 mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, coocking platform,vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in CM 1:4,including pointing in white cement (1:2)using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as directed by Engr-in-charge complete.

Dismantling of stone slabs and tiles of any descriptionn or thickness kin floors, aprons etc.

Supply and fixing mild steel in flat iron or rounded bars in available length any size including dismantling complete all as specified and directed.

M&L Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engeer- in charge.

M&L for 12 mm thick commercial plywood (IS), grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges including dismantling the existing boarding.

Supply and fixing in repair 18/19 mm thick block board of commercial type Gde-2 interior grade fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

M&L 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions.

Dismantling boarding any description, fixed in any position with nails

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.

S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator as specified.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panels) with 12mm thick commercial ply wood. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden/aluminium beads complete as specified and directed by EIC.

S&F Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed

S&F stainless steel butt hinges of size 100mm all as specified and directed.

S&F 75mm size stainless steel, butt hinges type B-22 complete all as specified and as directed

S&F Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed

S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed

S&F extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed

S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer.

S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe310-0.

M&L plain cement concrete 1:3:6 type C1, (20mm graded aggregate) for fixing hold fasts complete all as specified and directed.

S&F in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern all as specified.

S&F repair stainless steel ceiling cloth drying hanger of 4ft length as per following specifications : (a) Celing Pulley slates - 2 nos (b) S.S Tubes with nylon ropes - 6 nos (c) wall mounted holder - 1 nos (d) locking cones - 6 nos (e) screws - 10 nos (f) wall plugs - 10 nos , weight carrying capacity shall not be less than 5 Kg, all as specified and directed (Pattern shall be approved by GE)

S&F in repair Telescopy channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2 nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed.

Taking up or down steel tubing and connections and removing from store of following sizes, complete all as directed

(a) 20 mm bore

(b) 15 mm bore

Supply and fix Steel water tubing galvanised medium grade (ISI marked) of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

(a) 20 mm bore

(b) 15 mm bore

M&L for cleaning of GI pipes by opening of fittings, removing mud, sludge, etc and refixing as stated above for pipes of size.

(a) 20 mm bore

(b) 15 mm bore

M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement concrete 1:2: 4 type B 1 as required, superficial area of the cutting n.exc 150 sqm complete complete as specified and directed.

Supply and fix in repair hot water extention pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as directed.

Supply and fix in repair 600 mm long PVC connectors with brass adapters, washers etc complete all as directed.

Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.

Supply and fix in repair PVC profile sheet suitable for PVC Loft tank of capacity following sizes including fixing aluminium/ PVC channel around the profile incl removing of tank and refixing the same complete all as specified and directed.

M&L framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates ect cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and cuntersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 coplete as specified and directed.

Supplying and fixing in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

Supply and fix Gun-metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for iron pipe and fixed, with suitable fittings fixed new line and in position complete all as specified .

(a) 20 mm bore

(b) 15 mm bore

Supply and fixing in repairs bib tap 15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed

Supply and fixing in repair wall mixer,wall mounted with bend and over head shower all as specified and as directed.

Supply and fixing in repairs over head shower rose .

Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore

Supply and fix in repair open stop valve suitable for 15mm bore GI pipe.

Supply and fix in repair concealed stop valve suitable for 15mm bore GI pipe.

Supply and fix in repair chromium plated brass health faucet (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked all as per

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified

Cleaning of loft tanks of following capacities in existing position by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning completely all as specified & directed.

(a) 150 Ltrs

(b) 270Ltrs

Taking down chowkhat or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Taking down chowkhat or frame n exc 1.5 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Taking down of shutters of any description n exc 1 Sqm each of any description complete all as specified and as directed

Supply and Fix 40mm thick II class HW pannel framed shutter of (any number of panels) with panels of timber flat on both sides (feather edged ) or of veneered particale board medium density, wood particale board with commercial face veneers complete all as specified and as directed.

Supply and Fix 40mm thick flush shutters, solid core, construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match complete all as specified and directed.

Supply and Fixed in repairs 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass/gauge cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for doors, windows and ventilator complete all as specified and as directed

Supply and Fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE.

Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

Supply and Fix in repairs Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed

Supply and Fixed in repairs Aluminum anodized barrel tower bolt of extruded section 200mm long fixed with SS screws complete all as specified and as directed.

Material and Labour 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards complete all as specified and as directed.

Supply and Fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed in repairs complete all as specified and as directed

Supply and Fix 5.5mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed

Material and Labour for powder coated Aluminium frame and shutter for sliding windows & ventilators (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, locking arrangement, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) complete complete all as specified and directed. [Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, screws etc as required which shall not be measured for arriving the weight. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel arround contacting surface of aluminium work]

Supply and Fixed in repairs anodised aluminium door, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

Supply and Fix Aluminium anodised grill (thickness of anodising minumum 15 micron) with and including suitable aluminium anodized 'F'/ 'H' section frame 23.40 x 15.30 x 1.40 mm thick with aluminium rebated/ screwed attachment complete all as specified and directed in following situation :- (Note : (i) Aluminium grill shall be of 'Deco grill' of as per Design No. DG102, 7.50 mm x 6 mm and weight shall not be less than 3.131 Kg/ Sqm or approved design.

Supply and Fix 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws complete all as specified and as directed.

Material and labour for preparing the old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

Dismantling old unserviceable aluminium windows with frame, shutters etc complete.

M&L for repair to Spalling of concrete, damaged surface of RCC elements like beams, columns, wall, slab by removing all loose cement plaster/concrete, dust, oil, paint, grease, waterproof coating etc, Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits , Apply rust remover for rust free bars, apply Dr. fixit Epoxy zinc primer over the cleaned rebars and allow it to dry before pouring of Dr Fixit micro concrete or equivalent , appllying one coat of Dr fixit epoxy bonding agent before pouring of mix concrete, providing and laying of micro concrete at least upto 20mm thickness (average) by using the recommended water powder ratio mix the microconcrete with pan mixer as per manufacturer's instruction including watertight shuttering at any position including necessary curing and remocal of debris outside MD land complete all as specified and directed by Engineer-in-Charge. Note : (i) Rate of rust remover, Epoxy zinc primer, Epoxy bonding agent and micro concrete is included in this item.

Cleaning and desilting of sewage lines of any size any any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (b) If required getting a honey sucker and cleaning the heavily congested sewage line. (c) JCB and other machinery required on special basis would be called on requirement basis.

(a) 150 mm dia pipe line

(c) 300 mm dia pipe line

Cleaning and desilting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed by Engr-in-Charge . (b) If required getting a honey sucker and cleaning the heavily congested sewage line. (c) JCB and other machinery required on special basis would be called on requirement basis.

Cleaning and desilting of manholes depth exceeding 1.50 m but not exceeding 3.00 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed by Engr-in-Charge.

Removing/cleaning of chocks/blockades of sewage of any size between manholes at any depth including pumping liquid waste/sewage, plugging and diverting the flow in the drain if necessary using Kampti/cleaning rods, choke removing machine etc and including taking precautionary and safety measures such as use of safety belts, dry cells, torch for lighting inside the manholes and drains etc including drains manholes on either side and sewers passing hole knots disc of required size and sprinkle bleaching powder at places from where they are removed etc complete all as specified and directed

Cleaning the chocks/blockages in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors including necessay scafolding complete all as specified and directed . Note :- Including removing of trees and filling of holes with water proofing compound.

–Ditto- as per item No 145.00 here-in-before but 5th to 8th floor complete all as specified and directed

–Ditto- all as per item No 145.00 here-in-before but 9th floor to 12th floor complete all as specified and directed

–Ditto- all as per item No 145.00 here-in-before 13th floor to 16th floor complete all as specified and directed

Supply and Fixed in repairs cleanings eye (oval access door) for bends , branches, etc of dia not exceeding 100mm at any floor level complete all as specified and directed

Material and Labour for Jointing only 100mm bore of cast iron pipes and fittings or AC pipes in repair with cement joints upto ground/stilt plus 16th floors complete all as specified and directed.

Material and Labour for Jointing only 75mm bore of cast iron pipes and fittings or AC pipes in repair with cement joints upto ground/stilt plus 16th floors complete all as specified and directed

Excavation in trenches n,exc 1.5m wide and n.exc 1.5m depth for foundation etc or for shafts, wells,cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n exc 1.5min depth and getting out in soft/loose soil complete all as specified and directed.

Returning and filling in soil incl spreading, levelling, watering and well ramming in layers n.exc.25cm in foundation trenches completed all as specified and directed

Removing Excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Material and Labour for PCC.1:4:8 type D2 (40 mm graded aggregate) as in foundations of manhole,fillinng and mass concrete complete all as specified and directed

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc and remove outside MD land complete all as specified and directed

Material and Labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B1 as in coping, surface channels, benching,etc. for manhole finished fair and even complete all as specified and directed

Material and Labour Salt-glaged stoneware drain pipes 150mm internal dia, laid in trenches and jointed as specified including dismantling of existing drain pipe and taking out of trenches complete all as specified and as directed.

Material and Labour Salt-glaged stoneware drain pipes 300mm internal dia, laid in trenches and jointed as specified including dismantling of existing drain pipe and taking out of trenches complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:3:6 type-C2, using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested in for 150mm bore of pipe complete all as specified and directed.

Material and Labour for Plain cement concrete 1:3:6 type-C2, using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested in for 300mm bore of pipe complete all as specified and directed

Material and Labour for precast cement concrete manhole cover with plain faces (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles using RCC 1:2:4 type B1 and set in CM 1:4 including formwork complete all as specified and directed

Material and Labour for TMT (CRS) bars 10mm dia and over cut to length bent to shape spirally for hooping, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing clips, etc., complete all as specified and directed

Material and Labour for TMT (CRS) bars 6 to 8 mm dia, cut to length bend to shape reqd incl cranking and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped ends etc complete all as specified and directed

Supply and Fix Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers , stop valve boxes, gate stops, parts of ranges , balusters and similar articles exc 5 Kg each. complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description work etc complete all as specified and directed

Material and Labour for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde-E-165 complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe internal dia of pipe 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished , and reforming benching as required complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe internal dia of pipe 225mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished , and reforming benching as required complete all as specified and directed.

Taking down CI/Rain water pipes/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. complete all as specified and directed.

Supply and Fixed 100 mm bore of sand cast CI soil, waste and vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 16th floor complete all as specified and directed.

Supply and Fixed in repair 100 mm bore of sand cast CI bend of any radius with ovel access door and jointed with neat cement paste complete all as specified and directed.

Supply and Fixed in repair 100 mm bore of branch piece single branch of any radius with ovel access door and jointed with neat cement paste complete all as specified and directed.

Supply and Fixed 75 mm bore of sand cast CI soil, waste and vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 16th floor complete all as specified and directed.

Supply and Fixed in repair 75 mm bore of branch piece single branches any radius fixed to ovel acess door and jointed with neat cement paste complete all as specified and directed.

Supply and Fixed in repair 75 mm bore of sand cast CI bend of any radius with ovel access door and jointed with neat cement paste complete all as specified and directed.

Supply and Fixed 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE complete all as specified and directed.

Supply and Fixed 160mm dia PVC (SWR) bends/shoes any radius complete all as specified and directed.

Material and Labour in repair cast iron Nahani trap 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded aggregate complete all as specified and directed.

Material and Labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floor using chemical emulsion at the rate of one liters perhole, 300mm apart includeing drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed by Engineer-in-Charge.

Material and Labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 Litres per linear including drilling and plugging holes etc. complete all as specified & directed by Engineer-in-Charge.

Material and Labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at the points of contact of wood by chemical emulsion (in oil or kerosene based solution ) @ 0.5 litre /hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified & directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and Labour for Coloured glazed ceramic tiles in vertical surface 350x250mmx7mm thick/450x350x7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

Supply and Fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt with and including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel cromium plated aluminum hinging device complete connecting to P or S trap all as specified and directed.

Supply and Fixed 10 ltr capaciaty PVC low level flushing cistern with dual flushing system including brackets 5/10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. complete fixed as in repairs.

Surface excacation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

Removing excavated material exc. 50m and n.exc 250m depositing where directed at a level n. exc.1.5 m above the starting point complete all as specified and directed

Material and Labour hardcore of gauge n. exc 63mm of brocken stone or boulders, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed

Material and Labour for 100 mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed

Material and Labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick confirming to IS 15658-2006 made of M35 grade concrete complete all as specified and directed.

Material and Labour for Chequered cement concrete tiles 300x300x25mm etc. glosy finish set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 20mm thick screed bed in CM 1:4, including dismantling complete all as specified and as directed by Engr in Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic double locked casing ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(e) One 3 pin socket outlet 15 Amps on same board with other switches.

M & L for wiring for 15 Amp Socket with 2.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic double locked casing ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

Supply and fix Modular Switch, 6Amp, One way, 1 module.

S&F Modular Switch , 16Amp, One way, 1 module, ISI marked complete all as specified and directed.

Supply and fix Modular bell push, 6Amp, One way, 1 module.

Supply and fix support function blank plate single, 1 module complete all as specified and directed.

Supply and fix Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed .

Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module.

Supply and fix Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed

Supply and fix Modular white cover plate with Frame 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 3 Module complete all as specified and directed.

Supply and fix in repair Linear Aluminium Baten LED T/L 20W (min 110 lumen per watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fix in repair Linear Aluminium Baten LED T/L 10W (min 110 lumen per watt)Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge.

Supply and fix in repair LED lamp suitable for 14 watts (min 110 lumen per watt), 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply.

Supply and fix in repair Linear Aluminium Baten LED T/L 20W (min 100 lumen per watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light (Warm White) complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fix in repair Linear Aluminium Baten LED T/L 10W (min 100 lumen per watt)Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light (Warm White) complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfaced on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fix submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping / conduit not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping/ conduit and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping / conduit

Material & labour for unscrewing body parts of fans of any make/brands and description and opening of the stator & rotor of following sizes of fans and taking out down rod canopy,shackle, condeser housing with rubber reel bushes,ball bearing,metal bush and carry out repairs as directed and as required as under:- (a) M&L for opening the stator & rotor of the 1200mm / 1400 mm sweep ceiling fan cutting the exsisting worn winding & rewinding the fan with superior quality rewinding wire & filling the warnish as insulation between each winds & covering each loops of winding by sleeves & paper & reassembling of complete fan by fixing servicable old and new parts of fans i.e. rubber bush of condensor & shackle housing , condensor, gun metal bushes,ball bearings twin twisted copper cable down rod assembly with its shackle condenser housing & canopy ,split pins complete all as per manufacturers design air delivery including greasing,oiling & testing of fans all as per manufacturers design & speed complete all as directed & approved for 1200mm sweep. Notes for item NO (i) to (vii) :- (i). The quoted unit rate shall be deemed to be inclusive of taking out defective parts and fixing of new parts. All new parts shall be measured and paid vide relevant items of the schedule. (ii). The rates for refixing & taking out servicable parts shall be deemed to be included of quoted unit rates. (iii). New parts shall be of respective makes of fans. (iv). The quoted unit rates shall also include writing of MES No of fans (v). Unservicable /defective retrived parts shall be credited vide sch of creidt. (vi). After assembling all fans shall be tested for the speed as directed. (vii). All the fans are laying in store yard of AGE E/M and shall be repaired at store yard only.

All as per srl item No 224 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep

Supply and fix in repair GI U clamp heavy duty rubber reel of superior quality and nut and bolts with locking arrangement complete all as specified.

Supply only PVC canopy cover superior quality all as specified and directed by Engr - in - Charge

M&L for cleaning the fan motor assembly body,blade of ceiling fan, filling the cavity & painting with existing colour the ceiling fan/Exhaust fan with one coat of superior quality synthetic enamel paint by spraying appratus and spraying process including writing the MES number on the ceiling fans of 1200mm /1400 mm sweep with black colour synthetic enamel paint all as specified and as directed.

All as per srl item No 228 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep

Supply only bearing No 6201 for 1200/1400mm sweep ceiling fans.

Supply only bearing No 6202 for 1200/1400mm sweep ceiling fans.

Supply only capacitor 2.5 MFD dry type.

Supply only gun metal bush suitable for 1200/1400mm sweep ceiling fan.

S&F Clamp nut , bolt incliding safety pin for ceiling fan including taking down old pin.

Taking down old unserviceable rusted extaust fan shutter and supply and fixing shutter of size 225 to 450 mm sweep directed by engr- in- charge.

Making round/ square hole cutting in the kitchen wall with the help of cutting machine / chisel / hammer etc for fixing of exhaust fan of size 225 mm to 300 mm & making good to the distrubed surface including plaster, distumper , white wash complete all as specified and directed.

Checking serviceability of all ceiling fans/ exhaust fan in each quarter and checking clamps nut, bolts, pins are in healthy condition If any problem in any items will be noted down by electrician and informed concerned JE E/M and rectify the problem next day/ as soon as possible. All items will be measure and paid seperately all as directed by Engr -in-charge

Supply and fix in repair heating element 2KW /3KW, of instant type water heater as per existing capacity at site complete all as specified and directed.

Supply and fix in repair heating element 1KW/1.5KW, of storage type water heater of capacity upto 25 Ltr at site complete all as specified and directed.

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES E/M Store ,all as directed by Engr-in- charge.

S&F Ceiling Fan of size 1200mm Sweep, ISI marked, BEE 5 Star rating and alongwith down rod fixed to ceiling and connecting up including provision of flexible 3 core copper cable & testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge.

S&F Exhaust fan 150mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site.

S&F Exhaust fan 200mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site.

S&F Exhaust fan 225mm sweep, 1400 RPM metallic body with louvers without sound with louvers, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site.

Taking down old UNSV water heater of any type / capacity from site and depositing to MES E/M store,all as directed by Engr-in-charge.

Supply and fix , testing and commissioning of storage type water heater (geyser) vertical type of 6 Ltrs capacity , single phase, vertical type, Rust Resistant, ABS made with thermal cut off with power consumption 1500 watts, ISI marked, BEE 5 star rating (latest year) including fixing on wall with chroumium plated screws & nut bolts connected to existing water and electric connection complete all as specifed and directed by Engr-in-Charge.

Repairs and maintenance of water heaters (Geysers) at existing position of any capacity / size mounted on wall by opening nuts and locating the fault and repair / replacement of the unserviceable spares / parts and make it fully functional and reassembling the same after complete repairs in all respects all as specified and directed.

S&F in replacement thermostate switch for geyser of any type ISI marked complete all as specified and directed by engineer in charge.

S&F in replacement thermmal cut out for geyser of any type ISI marked complete all as specified and directed by engineer in charge.

Supply and fix in replacement hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified.

Supply and fix in replacement Cold water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified.

S&F in replacement of top plug 15 Amp 3 pin complete all as specified and directed by engineer in charge.

S&F in replacement indicating lamp green/red in colour for geyser 230 volts complete all as specified and directed by engineer in charge.

M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip.

Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip32 x 6 mm with the help of bolts, nuts, and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type C2 and PCC cover 1:2:4 type B1 watering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No. 5 of SSR Pt-1, including testing on completion.

Note for all Items- Contractor shall setup a complaint cell (in the space provided by the Engr-in-Charge) to deploy sufficient skilled and unskilled manpower (Painter, carpenter, Plumber, Electrician, Helper) to carry out work as per item listed in this Sch. Team shall be ready to attend the complaint with 12 hours, penality of Rs 1000/day shall be imposed for delay.

Furniture-

Supply of new Chair Dinning (Offr) as per FD Drg No FD/MAP-II/04- DIMENSION :Overall size shall be 950mm high,450mm wide and 450mm deep. DESCRIPTION The size of the front and rear legs shall be 35x50mm .Front and side rails shall be of size 25x65mm.TW verticle strips of size 30mmx15mm; 4 in nos shall be fixed as specified in drg. 75x75x25 teak wood stopper shall be fixed with main frame and legs four nos one in each in every corner for the support of the cushion and seat ply. 75mm thick 40 density cushion covered with tapestry cloth of approved shade /colour by Engg-in-Charge shall be fixed over 12mm thick ply as specified in drg. Side frame of back of the chair shall be of section 35x50mm. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm. All wood surfaces shall be two coats of melmine polished with high gloss finish of shade approved by GE. Rest all as per drg. FINISH: All wood surfaces exposed to view when placed in position shall be two coats of melamine polished over a coat of wood primer.

Supply of new Table dressing ladies with mirror as per FD Drg No FD/MAP-II/07, DIMENSION:The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. DESCRIPTION:- The sides, top, back and front of the base unit made up of 18mm thick Marine ply with both side laminated with laminate sheet of approved colour /Shade as directed by GE/Engg-in-Charge. The bottom of the side units shall be of 12mm thick marine ply. The sides and back drawers shall be of 12mm thick marine ply, bottom of the drawers shall be of 6mm thick marine ply whereas the front of the drawers shall be of 18mm thick Marine ply with both side laminated with laminate sheet of approved colour /Shade. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm. A horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick Marine ply with both side laminated with laminate sheet of approved colour /Shade .The top of the stool shall be of 12mm thick marine plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high, made of foam 40 density covered with tapestry cloth as shade approved by Engr-In-charge/GE. 50mm and 75 mm stainless steel decorative handles as per sample approved by GE shall be provided for drawrs and shutters respectively. Magnetic Cacher of ISI marked for 2 shutters and telescopic channel shall be provided. Rest all shall be provided as per drg. FINISH: All wood surfaces exposed to view when placed in position shall be two coats of melamine polished over a coat of wood primer.

Supply of new Bed (Steel) Plywood top without FMN set as per FD Drg No FD/E6/MAP/08(R), DIMENSION: Overall size shall be 2050mm long, 900mm wide and 500mm high(footboard side) and 800mm high (head board side). DESCRIPTION: All Steel shall be of rectangular CR pipe of 18 Gauge.The head board shall be 800mm high and Foot board shall be 500mm high.The frame of head board and foot board shall be of 38mmx38mm rectangular CR pipe.18mmx18mm rectangular CR pipe shall be provided in the inner of head board frame/foot board frame as shown in drg. 18 mm thick marine ply covered with both side laminate sheet of approved shade shall be screwed to MS strip arc welded to 18mm thick rectangular CR pipe with standard workmanship both in head board/foot board. 25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR plywood approved as per IS specified guideline fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. FINISH: All metal /iron work shall be pre treated with epoxy powder coated oven baked with synthetic enamel black. Rest all as per drg and directed by Engg-in -Charge.

the bhimani group of companies (BID ID -3122417)

satguruenterprises (BID ID -3120812)

R.C. Magla and Co. (BID ID -3121674)

RAMESH ENTERPRISES (BID ID -3122317)

Shetty Construction Co (BID ID -3121423)

ASHOK CONSTRUCTION (BID ID -3121398)

RS Enterprises (BID ID -3121716)