Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-Finance | ₹11.3 L | L1 | Accepted-Finance Being Lowest (L1) |
| 2 | L2₹11.9 LRejected-Finance | ₹11.9 L | L2 | Rejected-Finance Not Being Lowest |
| 3 | L3₹12.2 LRejected-Finance | ₹12.2 L | L3 | Rejected-Finance Not Being Lowest |
| 4 | L4₹12.6 LRejected-Finance | ₹12.6 L | L4 | Rejected-Finance Not Being Lowest |
| 5 | L5₹16.5 LRejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | ₹16.5 L | L5 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | Pritam Electro Mechanical Services L3 | Sachin Electricals L1 | Priyanka Power line L4 | metro electrical services L5 | AARYA ENGINEERING L7 | BHARAT ENGINEERS & CONTRACTORS L6 | Shining Star Electricals L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for servicing solar water heater (Flat Plate collector/tube collector) by removing the flange plates, cleaning the top galss, collectors internally & externally by using descaling solution, removing the blockages in the collectors complete and refixing the flange plates, recharging the water in recharge tank testing for satisfactory function all as specified and directed. | 106 | Each Job | 500 ₹53,000 | 2,000 ₹2.1 L | 2,500 ₹2.6 L | 3,000 ₹3.2 L | 4,400 ₹4.7 L | 3,300 ₹3.5 L | 3,000 ₹3.2 L |
| 2.00 | S & F heating element 25mm to 32mm dia, ISI marked for solar water heater of capacity 3 KW all as specified and directed by Engr in charge. | 6 | Each | 650 ₹3,900 | 900 ₹5,400 | 1,200 ₹7,200 | 850 ₹5,100 | 1,550 ₹9,300 | 3,500 ₹21,000 | 1,100 ₹6,600 |
| 3.00 | S & F flange plates of size 25 mm dia suitable for flat plate collectors including taking down old unseviceable flange plate all specified and directed. | 6 | Each | 200 ₹1,200 | 680 ₹4,080 | 650 ₹3,900 | 800 ₹4,800 | 800 ₹4,800 | 650 ₹3,900 | 750 ₹4,500 |
| 4.00 | S & F flexible heat resistance rubber pipe (from inter connect plate collector to hot water tank) of size 25 mm to 32 mm dia etc with fixing clamp etc complete all as specified. | 16 | Each | 200 ₹3,200 | 302 ₹4,832 | 500 ₹8,000 | 500 ₹8,000 | 525 ₹8,400 | 300 ₹4,800 | 485 ₹7,760 |
| 5.00 | Taking down the collector from its position, removing the top glass of collector and carry out welding/brazing work to the collector and arresting the leakages in the collector, refixing top glass back with all sealing agent, testing for satisfactory function all as specified and directed. | 4 | Each Job | 500 ₹2,000 | 4,000 ₹16,000 | 8,300 ₹33,200 | 6,000 ₹24,000 | 8,000 ₹32,000 | 6,500 ₹26,000 | 7,000 ₹28,000 |
| 6.00 | M & L for submain wiring with two runs of 4 sq mm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volts and including electrical grade PVC casing caping of desired colour not less than 1.2 mm and 25 mm wide & 4 sq mm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed including taking down old wiring.
Note :- Three run of 4 Sqmm copper wire and one run of casing caping shall be measured as one length | 350 | RM | 100 ₹35,000 | 165 ₹57,750 | 125 ₹43,750 | 220 ₹77,000 | 200 ₹70,000 | 200 ₹70,000 | 120 ₹42,000 |
| 7.00 | Steam Bath : Checking of electrical wire connection , level sensors, Heaters coil, earthing leakage, electronic circuits, control panel & safety arrangements of the water level & units. Cleaning the sensors, desacling of hard water tank, servicing of electrical, pneumatic valve, proper insulation for the boilers including replacement of defective spares and fixing the same with new including testing one etc complete.
Note -
(a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge.
(b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt.
(c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only". | 9 | Each Job | 500 ₹4,500 | 3,900 ₹35,100 | 4,500 ₹40,500 | 3,000 ₹27,000 | 5,000 ₹45,000 | 5,500 ₹49,500 | 3,500 ₹31,500 |
| 8.00 | Sauna Bath :- Checking of the heater coil, electronic temp control, calibrating temp device, accuracy, safety cut off the heater & cleaning the sensors of the electronic devices / equipments etc including replacement of defective spares and fixing the same with new including testing etc complete.
Note -
(a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge.
(b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt.
(c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only) | 9 | Each Job | 500 ₹4,500 | 3,000 ₹27,000 | 4,500 ₹40,500 | 3,000 ₹27,000 | 4,950 ₹44,550 | 5,500 ₹49,500 | 3,500 ₹31,500 |
| 9.00 | Supply only 15 psi safety valve (Pressure relief valve) | 4 | Each | 400 ₹1,600 | 800 ₹3,200 | 875 ₹3,500 | 1,500 ₹6,000 | 1,000 ₹4,000 | 500 ₹2,000 | 900 ₹3,600 |
| 10.00 | Supply only 240 V 5 amps glass fuse | 4 | Each | 20 ₹80 | 316 ₹1,264 | 400 ₹1,600 | 100 ₹400 | 425 ₹1,700 | 450 ₹1,800 | 400 ₹1,600 |
Updated dates
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
10 Jan 2026, 6:00 pmClosed
Shri Vikas Tanwar, IDSE, GE (CME) Khadki
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi, Pune
REPAIR/MAINTENANCE OF STEAM BATH,SAUNA BATH, GEYSERS, SOLAR WATER HEATER AT CME UNDER GE (CME) KHADKI
2025_MES_744428_1
8670/E8
Open Tender
Electrical and Maintenance Works
180 days
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Khadki
₹40,000
Yes
15 Jan 2026
13 Dec 2025
12 Jan 2026
13 Dec 2025
10 Jan 2026
28 Dec 2025
14 Dec 2025 - 27 Dec 2025
Amount
M & L for servicing solar water heater (Flat Plate collector/tube collector) by removing the flange plates, cleaning the top galss, collectors internally & externally by using descaling solution, removing the blockages in the collectors complete and refixing the flange plates, recharging the water in recharge tank testing for satisfactory function all as specified and directed.
S & F heating element 25mm to 32mm dia, ISI marked for solar water heater of capacity 3 KW all as specified and directed by Engr in charge.
S & F flange plates of size 25 mm dia suitable for flat plate collectors including taking down old unseviceable flange plate all specified and directed.
S & F flexible heat resistance rubber pipe (from inter connect plate collector to hot water tank) of size 25 mm to 32 mm dia etc with fixing clamp etc complete all as specified.
Taking down the collector from its position, removing the top glass of collector and carry out welding/brazing work to the collector and arresting the leakages in the collector, refixing top glass back with all sealing agent, testing for satisfactory function all as specified and directed.
M & L for submain wiring with two runs of 4 sq mm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volts and including electrical grade PVC casing caping of desired colour not less than 1.2 mm and 25 mm wide & 4 sq mm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed including taking down old wiring. Note :- Three run of 4 Sqmm copper wire and one run of casing caping shall be measured as one length
Steam Bath : Checking of electrical wire connection , level sensors, Heaters coil, earthing leakage, electronic circuits, control panel & safety arrangements of the water level & units. Cleaning the sensors, desacling of hard water tank, servicing of electrical, pneumatic valve, proper insulation for the boilers including replacement of defective spares and fixing the same with new including testing one etc complete. Note - (a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge. (b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt. (c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only".
Sauna Bath :- Checking of the heater coil, electronic temp control, calibrating temp device, accuracy, safety cut off the heater & cleaning the sensors of the electronic devices / equipments etc including replacement of defective spares and fixing the same with new including testing etc complete. Note - (a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge. (b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt. (c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only)
Supply only 15 psi safety valve (Pressure relief valve)
Supply only 240 V 5 amps glass fuse
Supply only auto drain solonied valve 12 volts 6 watts for steam bath.
Supply only water inlet solonoid valve 12 volt 6 watts for steam bath
Supply only Boiler insulation glass wool pad 25mm thick 40 Kg density with aluminium foil for steam bath
Supply only steam generator power heating element 3KW for steam bath
Supply only high limit temperature (i.e 105 degree) switch thermostat for steam bath/sauna bath
Supply only temperature sensor including extension wire of length 6 metre for steam bath
Supply only Digital Control steam processor circuit board for steam/Sauna bath.
Supply only step down Transformer with dual output primary 230 V and secondary 35 Volt 5 Amps for steam bath.
Supply only Mains power Terminal 4 way connector 63 amps
Supply only silicon heater washer
Supply only power contactor 40 Amps 440 volts, 50 Hz
Supply only temperature thermostat range 30 to 110 degrees.
Supply only 4 way channel terminal strip connector 32 Amps.
Supply only low density industrial Sauna heating element S/S 2000 watt.
Repair/checking of storage type water heater (geyser) of any capacity including replacement of required spares such as heating element thermostat, indicator, fusible plug dead weight,hot/cold water hose pipes incl any other repairs work at different locations within the CME all as specified and directed by Engr in charge for the Note : 1. Spare components will be mesaured and paid seperately. 2. Contractor will detail mechanic to AGE E/M complaint cell at 0900 daily to collect docket.
Supply only thermostat complete with manually temperture setting knob extra long (11 inches) ISI marked suitable for geysers 25 liters to 50 liters capacity
Supply only thermostat with auto cut-out knob complete at tripping 90 degree (+5%) Temperature of length (7 inches) ISI marked suitable for geysers 25 litres to 50 litres capacity.
Supply only fusible plug ISI marked suitable for 25 to 50 litres capacity Geysers.
Supply only safety valve (to be fixed on outlet connection) ISI marked suitable for 25, and 50 litres capacity geysers.
Supply only heating element upto 2 KW as required at site including rubber washers (ISI Marked) suitable for Bajaj/Racold/Usha/Jaquar/Jilco/Crompton/ Havells make geyser complete.
Supply only non return valve(NRV) brass of 15mm bore, after dismantling old unserviceable NRV of any size all as specified and directed.
S & F Hot/Cold water flexible hose pipe 12/16mm dia and 450 to 900mm long heavy duty covered with metal wires heat resistence with both ends PVC hexagonal check nut with washer to fixed on 15mm dia GI pipe all as specified and directed.
M & L for preparation of steel surface of geysers , apply putty to make the surface smooth/ even and applying one coat of synthetic enamel paint white including writing of MES Nos with black paint complete all as directed & for any size or capacity of geysers .
Taking down loose geysers of any capacity from store/site & installing the same at new location within the CME complete with grouting of bolts & all necessary pipe connections and making good the disturbed wall surfaces all as directed. Note :- spares if required shall be measured and paid separately.
S & F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts.
S & F GI tubing (Medium grade) with all fitting and fixed to complete on wall and ceiling or laid in trenches of size 15mm bore incl taking down old unserviceable one all as specified and directed.
M & L for stop valve, cast copper alloy, screw down high pressure, crutch handle screwed both end for iron pipe, fancy type, chromium plated for 15mm bore pipe incl taking down old unserviceable one .
M & L for Bib tap,fancy type, chromium plated for 15mm bore pipe
S & F gasket rubber ring for heater plate of any size geyser.
S & F indicator lamp of geyser 25-50 litres capacity of RED/GREEN colour.
S & F PVC copper conductor cable 3 core 2.5 sq mm flexible multistranded 1100 V grade unsheathed cable.
M & L for switch socket combination 2 in one 3 pin 16 Amps 240 volts flush type complete all as speciied and directed.
M & L for socket outlet 3 pin incl PVC enclosure 240 volts controlled by one MCB SP 25 Amps, Make Havells or equivalent complete all as specified and directed.
M & L for Metal clad industrial plug top of cap 16 Amps
M & L for plug top porcelein 3 pin 15/16A 230 V AC supply
Supply and laying in replacement of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for outer dia 16mm complete all as specified.
Supply and fix in replacement ball valve suitable for 16mm dia CPVC pipe complete all as specified and directed.
Supply and fix in replacement brass elbow suitable for 16mm dia CPVC pipe complete all as specified and directed.
Supply and fix in replacement brass tee suitable for 16mm dia CPVC pipe complete all as specified and directed.
M&L for lagging to pipes used for hot water supply 15 to 25mm dia or plumbing all round with 25mm thick bonded mineral wool pre-formed 'SNAP ON' pipes section of density 144 Kg/Cum, incl chiken mesh netting of 20mm mesh and 0.01mm thick aluminium foil cladding around the pipe complete all as specified and as directed by Engr-in-Charge.
Shining Star Electricals (BID ID -3514797)
Pritam Electro Mechanical Services (BID ID -3510062)
Priyanka Power line (BID ID -3514987)
metro electrical services (BID ID -3519988)
BHARAT ENGINEERS & CONTRACTORS (BID ID -3515005)
AARYA ENGINEERING (BID ID -3514083)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
8670tendernew.pdf
Tender Documents • 1.29 MB
BOQ_833562.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid