Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC NO 28 KUMHARON KI BASTI DHOONDHA BARMER RAJASTHAN 344035 | BARMER | RAJASTHAN | 344035 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹20.4 L+₹2.4 L (13.3%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹20.7 L+₹2.7 L (15.1%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹21.4 L+₹3.4 L (18.9%)Rejected-Finance 894 NEAR 132 KV POWER HOUSE SINDHARI ROAD BALDEV NAGAR BARMER RAJ 344001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹24.5 L+₹6.5 L (36.2%)Rejected-Finance 12 53 CHOPASNI HOUSING BOARD JODHPUR 342008 | JODHPUR | RAJASTHAN | 342008 | L5 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | Rasam Engg Co. L3 | Devi Engineeing L2 | National Rewinding Works L6 | PANKAJ ENTERPRISES L5 | DEVARAM CONSTRUCTION COMPANY L1 | GITANSH ENGINEERS AND COMPANY L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 350 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Copper bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.00 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame of size 50X50X6mm fixed at 75 cm height from groud level & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands and lugs of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & including the following accessories : | 1 | Each Job | 1,10,000 ₹1,10,000 | 1,25,000 ₹1,25,000 | 13,00,000 ₹13,00,000 | 1,52,000 ₹1,52,000 | 85,000 ₹85,000 Lowest | 1,22,000 ₹1,22,000 |
| 1.01 | (i) BUS-BAR & INTERNAL CONNECTIONS :
The bus-bars shall be made up of 04 Nos high grade Aluminium with rating should be suitable as per incoming Breaker, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.
PROVISION FOR CABLE ENTRY :
The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.
INCOMING :
(a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160-200 Amps - 01 . | - | - | - | - | - | - | - | - |
| 1.02 | OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01 No.
(b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 A - 03 Nos.
(c) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete .
(d) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 01 No.
(e) MCB TPN "C" series having breaking capacity 10 KA of rating 40 to 63 Amps - 01 No. | - | - | - | - | - | - | - | - |
| 1.03INSTRUMENTATION SYSTEM : (a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm. Make : L & T, Cat No: WL411010OOOO or techno-commercially equivalent of Elmeasure /Secure. (b) Indicator lamp with integral circuit (230/240 Volts) & cluster LED (Red, Orange, Blue) - 01 Set. (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). (d) Door opening key - 02 Nos | |||||||||
| 2.00 | Supply, install, testing & commissioning of LT busbar junction box "out-door type" of size 750 mm (height) x 600 mm (breadth) x 300 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The box shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar of Size 300mm x 70mm x 6mm , min spacing of 75mm between the busbars & wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming cable rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including I/C & O/G cable opening on bottom & at both sides including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl Incoming MCCB of 63 Amps for bus bars in seprate portion complete all as specified & as directed. | 3 | Each Job | 21,000 ₹63,000 | 14,000 ₹42,000 Lowest | 20,000 ₹60,000 | 41,000 ₹1,23,000 | 30,000 ₹90,000 | 36,999 ₹1,10,997 |
| 3.00 | S&F loop in- loop out fuse junction box of internal dimension 200x140x95mm made out of FRP sheet and locking screw fitted with and incl 6 Amps SP MCB - 1 No , 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/Rail poles including necessary aluminium clamps, suitable glands, lugs,GI nut and bolts including taking down old u/s junction box complete all as specified and directed by Engr-in-Charge. Make : Sintex Cat No GSJB-2014 or techno-commercially equivalant in Hensel/OBO. | 60 | Each | 650 ₹39,000 | 600 ₹36,000 | 900 ₹54,000 | 690 ₹41,400 | 550 ₹33,000 Lowest | 811 ₹48,660 |
| 4.00 | Supply,fix and test, in replacement of LED Street light fitting of capacity 45 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 4500 Lumens output with IP 66 protection and impact resistance of IK-08 having lens embedded PC Cover bottom opening seprate driver compartment including taking down old u/s Sodium vapour light fitting complete all as specified and directed by Engr-in-Charge. | 21 | Each | 1,200 ₹25,200 Lowest | 1,600 ₹33,600 | 2,100 ₹44,100 | 1,750 ₹36,750 | 3,000 ₹63,000 | 3,000 ₹63,000 |
| 5.00 | Supply and fix in replacement bracket suitable for street light, made out of 40 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coat of aluminium paint complete incl taking down old unsv one and all as specified and directed by Engr-in-Charge. | 21 | Each | 700 ₹14,700 | 370 ₹7,770 | 300 ₹6,300 Lowest | 600 ₹12,600 | 550 ₹11,550 | 500 ₹10,500 |
| 6.00 | S & F Rigid Non-metallic PVC conduits medium grade (for passing the pvc insulated cable along the pole) of external dia not less than 20 mm including GI/Aluminium clamp for fixing the conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories with aluminium clamp,bolt, nuts etc for fixing including taking down old u/s conduits complete all as specified and directed by Engr-in-Charge.NOTE: PVC insulated cable shall be measured and paid separately. | 400 | RM | 40 ₹16,000 | 40 ₹16,000 | 20 ₹8,000 Lowest | 38.4 ₹15,360 | 40 ₹16,000 | 34 ₹13,600 |
| 7.00 | S&F in replacement of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed in PVC Conduit along with pole structure etc with all fixing & connecting accessories including taking down the old Unsv wire from pole Make:Havells, cat no: WHMFDSKB31X5 or techno-commercially equiv in Finolex/Polycab all as specified and directed by Engr-in-Charge.NOTE: PVC conduit shall be measured and paid separately. | 400 | RM | 90 ₹36,000 | 70 ₹28,000 | 45 ₹18,000 | 40 ₹16,000 Lowest | 55 ₹22,000 | 77 ₹30,800 |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
6 Oct 2025, 6:00 pmClosed
GE (A) BARMER
GE (A) BARMER
SPL REPAIR OF OVERHEAD LT LINE INTO LT UG CABLE FROM GP NO12 TO GP NO15 OF SODIUM VAPOUR STREET LIGHT INTO LED STREET LIGHTS INCL ALLIED WORKS AT AMN COY AND OLD UNSV CEILING FANS AT DIFFERENT LOC AT LANCERS GH AT MIL STN JASAI UNDER GE A BARMER
2025_MES_729492_1
8858/E8
Open Tender
Civil Works
Item Rate
240 days
BARMER
Please refer Tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (A) BARMER
₹39,000
Yes
16 Mar 2026
5 Sept 2025
9 Oct 2025
5 Sept 2025
6 Oct 2025
23 Sept 2025
Amount
Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 350 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Copper bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.00 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame of size 50X50X6mm fixed at 75 cm height from groud level & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands and lugs of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & including the following accessories :
(i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium with rating should be suitable as per incoming Breaker, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160-200 Amps - 01 .
OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01 No. (b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 A - 03 Nos. (c) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . (d) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 01 No. (e) MCB TPN "C" series having breaking capacity 10 KA of rating 40 to 63 Amps - 01 No.
Supply, install, testing & commissioning of LT busbar junction box "out-door type" of size 750 mm (height) x 600 mm (breadth) x 300 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The box shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar of Size 300mm x 70mm x 6mm , min spacing of 75mm between the busbars & wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming cable rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including I/C & O/G cable opening on bottom & at both sides including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl Incoming MCCB of 63 Amps for bus bars in seprate portion complete all as specified & as directed.
S&F loop in- loop out fuse junction box of internal dimension 200x140x95mm made out of FRP sheet and locking screw fitted with and incl 6 Amps SP MCB - 1 No , 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/Rail poles including necessary aluminium clamps, suitable glands, lugs,GI nut and bolts including taking down old u/s junction box complete all as specified and directed by Engr-in-Charge. Make : Sintex Cat No GSJB-2014 or techno-commercially equivalant in Hensel/OBO.
Supply,fix and test, in replacement of LED Street light fitting of capacity 45 Watts, CRI >70, Power factor > 0.95, colour temperature 5700K, luminous Efficacy not less than 100 lumen/watt, 4500 Lumens output with IP 66 protection and impact resistance of IK-08 having lens embedded PC Cover bottom opening seprate driver compartment including taking down old u/s Sodium vapour light fitting complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement bracket suitable for street light, made out of 40 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coat of aluminium paint complete incl taking down old unsv one and all as specified and directed by Engr-in-Charge.
S & F Rigid Non-metallic PVC conduits medium grade (for passing the pvc insulated cable along the pole) of external dia not less than 20 mm including GI/Aluminium clamp for fixing the conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories with aluminium clamp,bolt, nuts etc for fixing including taking down old u/s conduits complete all as specified and directed by Engr-in-Charge.NOTE: PVC insulated cable shall be measured and paid separately.
S&F in replacement of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed in PVC Conduit along with pole structure etc with all fixing & connecting accessories including taking down the old Unsv wire from pole Make:Havells, cat no: WHMFDSKB31X5 or techno-commercially equiv in Finolex/Polycab all as specified and directed by Engr-in-Charge.NOTE: PVC conduit shall be measured and paid separately.
Supply,fix and testing of Control panel single phase factory fabricated (CPRI type-tested) 6.0KW with MCB SPN 40 A, contactor TP-32 A-01 No, Digital Timer Control Panel, outdoor type including connected switch gears, cables, etc. and suitable sheet metal enclosure test and commisioning of Panel of 240V, out door(IP-54) cubical type with suitable provision of 25x25x3mm angular base and vertical frame along with necessary PCC foundation and locking arrangement incl taking down old unsv one complete all as specified and directed. Make : Havells,Cat No:IHXSS01060 or tech-commercially equivalent in L&T/Legrand.Note :- The quoted rate shall be inclusive of the following:- (i) Suitable copper control wiring inside Panel boards, cable glands, cable lugs, supporting, insulators etc., (ii) Quoted rate is inclusive of angular base frame and PCC foundation Earth work and connected accessories. (iii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI Pipe etc. and getting out in Hard/Dense soil complete.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.
Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
Supply and spreading Tibba Sand including watering and consolidation in trenches for cushioning/cable protection all as specified and directed by Engr-in-Charge. Note : Punned thickness shall be measured and paid
Supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables in trenches for cable protection of U/G cables with width equal to length of bricks complete all as specified and directed
M&L for GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 40 mm complete all as specified and directed. Make : TATA/JINDAL/PRAKASH. Note : Wherever GI Protection pipes are to be placed/fitted above earths surface, cost of necessary clamping/fixing arrangements to the entire satisfaction of Engr-In-Charge is deemed to be included in the unit quoted rates.
Description all as per Item Sl No 14 here in above but of bore 80 mm.
M&L for cutting the existing hardstanding/PCC/WBM road at a depth of not less than 60 cm & 30 cm in width for passing of LT cables through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and as directed.
NOTE for Item Nos 9 to 16 : Any damages made to the existing services of MES/WCB/Other Depts like HT/LT UG cables, Water Supply/Sewage Pipe lines, OFC/BSNL/Signal communication cables etc. during the excavation/boring/road cuting etc. progress of the work shall be made good with proper jointing kits etc. as per original to the entire satisfaction of Engr-In-Charge & GE & the cost of the same is deemed to be included in the unit quoted rates. Decision of the AO shall be final & binding.
Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4.0 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories like Lugs, Gland etc complete all as specified & as directed.
Description all as per Item Sl No 17 here in above but of size 10 Sqmm 4.0 core.
Description all as per Item Sl No 17 here in above but of size 50 Sqmm 3.5 core.
Description all as per Item Sl No 17 here in above but of size 70 Sqmm 3.5 core.
Dismantling of ACSR conductor of any size/type from existing PCC/Steel poles all as directed by Engr - in - charge at site.
Dismantling of insulators of any size/type from existing PCC/Steel poles all as directed by Engr - in - charge at site.
Dismantling of Iron Cross Arms Angel/channel of any size/type from existing PCC/Steel poles along with clamps and Nut/bolts all as directed by Engr - in - charge at site.
Material and labour for taking down Old Unserviceable LT UG Cable of any size/type incl all Accessories
M & L for surface sub-main wiring alongwith earth wire of size (2 x 1.5) sq. mm + (1 x 1.5) sq. mm earth wire, ISI marked, FRLS-H, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC casing-caping with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of Casing-caping : Press-fit/Precision/Modi.Note : (i) 3 Runs of 1.5 sqmm wire and one run of casing caping shall be measured as one unit length .(ii) The cost of making good the disturbed surfaces & matching to the original/existing surface is deemed to be included in the quoted rate. (iii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth
S & F Modular switch, one way, 6Amps, 1 Module, 240 volt complete all as specified and as directed.
Supply & Fixing PVC surface box suitable for fixing switches/sockets of 3 modules complete all as specified & as directed.
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed.
Supply and Fixing ceiling fans complete with Aluminium blades, down rods of suitable lengh upto Ceiling/false ceiling level, with fan regulator 2M and accessories, 230 V, 1200mm sweep, min air delivery 220 Cubic meters per minute and power consumption should be < 30 Watts with service value 6.00 BEE Five star rating with Brushless direct current motor rating (BLDC) including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed by the Engr-in-Charge incl taking down old/unsv fan. Note : (i) Installed Ceiling fan's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surfaces and matching to the existing/original surface is deemed to be included in the unit quoted rates (iii)The cost of taking down old unserviable Ceiling fan's and tranportation of old Ceiling fan's to be submitted to MES Store yard is deemed to be included in the quoted rate.
Devi Engineeing (BID ID -3438039)
Rasam Engg Co. (BID ID -3437622)
GITANSH ENGINEERS AND COMPANY (BID ID -3435076)
PANKAJ ENTERPRISES (BID ID -3436155)
National Rewinding Works (BID ID -3438490)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .