REPAIRS TO LEAKAGE/SEEPAGE, FLOORING, PLASTERING ETC AND MISC B/R ITEMS IN ARMY AREA MOUNT ABU UNDER AGE(I) UDAIPUR

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Demolition stone slabs and tiles of any description, laid bedded and pointed in any mortar.

Material and Labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor

Material and Labour for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes.

Material and Labour for 10mm thick rendering in CM 1:4 to receive tiles etc on vertical surfaces of walls.

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and Labour for Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and Labour for Virified double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc.

All as item No. 9 above but on vertical surfaces/skirting.

Material and Labour Chequred cement concrete tiles rubbrised moulded size 30 cm x 30cmx 25 mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified as directed.

Dismantling plain or corrugated steel sheeting any gauge/thickness including Nainital or similar pattern roof covering.

Dismantling of AC corrugated/semi corrugated sheet as in roof coverings complete.

Dismantling single layer Mangalore pattern or similar tiles in roofing etc including all ridges,hips,valley embedded in cement mortar or cement lime mortar complete all as directed

Dismantling of timber scantling as in fillets,rails.posts,rafters,purlins under 40 sq cm in section(framed work).

Supply and Fixing galvanised 0.63 mm thick corrugated mild steel sheeting class-8 with two corrugations side lap fixed with L-type or J-type screws in roofs coering

Supply and Fixing 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Supply and fixing of Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping scres as specified

Supply and fixing of Pre-painted galvatume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping scres as specified

Dismantling of wall and ceiling boards any thickness,including cover fillets etc complete all as specified and directed

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Supply and Fixing joist channel, angle or tee section, fixed in purlin rafter cleat, support etc incl welding, riveting etc conforming to Fe-290 Gde-E-165.

Material and Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide.

Taking down cement mortar plaster/terrazo of any description on wall including racking out joints,hacking for key,scrubbing down with water etc complete as directed

Material and labour for 10 ,mm rendering in cement mortar (1:3) on concrete surfaces of ceiling,finished even and smooth without using extra cement.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement.

Material and labour for 15 mm rendering in two layer, 10 mm thick in cement mortar (1:6) in dubbing coat and 5 mm thick in cement mortar (1:6) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall suerfaces, finished even and smooth without using extra cement complete.Note:- water proofing compound shall be measured and paid separately.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distember over a coat of alkali resistant priming paint & smooth surface with internal wall putty.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weatherproof acrylic emulsion paint over a coat of primer paint etc complete.

Material and Labour preparing new surface of wall and applying a layer of 1mm thick white cement based putty for neat and smooth finishing. Make :-Birla, Berger.

Supply and Fixing in repair 15mm dia fancy type bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or union.(Make- Prayag/Jaquar Essco /Plumber)

Supply and Fixing in repairs, cromium plated concealed type stop cock 15 mm size. (Make- Prayag/Jaquar Essco /Plumber)

Supply and Fixing in repair 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. (Make-Paryag/Polytuf/Pearl)

Supply and Fixing in repair shower rose 75m dia of continental series of Jaquar or equilavent as approved by Engr-in-Charge( Make-Paryag/Polytuf/Pearl)

Supply and Fixing in repair 15mm dia health faucet with PVC 1.00 m long flexbile pipe. Make : Jaguar or equilavent as approved by Engr-in-Charge. (Make- Prayag/Jaquar Essco /Plumber)

Supply and Fixing in repair curtain rod 25mm dia anodized aluminium alloy including fancy type brackets

Supply and Fixing in repairs 8mm thick glass shelf corner 200mm size including SS railing as approved by Engr-in-Charge.

Supply and Fixing in repair gate valve 20mm dia cast copper alloy screwed down, screwed for iron pipe fixed.(Make- Prayag/Jaquar Essco /Plumber)

Supply and Fixing in repair gate valve 25mm dia cast copper alloy screwed down, screwed for iron pipe fixed.

Supply and Fixing Aluminium anodised or powder coated door, window, ventilator frame and cabin partition with one or more rebates and shutter sliding or casement windows as reqd with grill . including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair 12mm thick both side pre-laminated particle board fixed to aluminum frame door (Make –NOVA PAN or equivalent).

Supply and Fixing 5.50 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each.

Taking down Chowkhats or frames with shutters exc. 1.5 Sqm each not exc 4.00 Sqm each (without taking off shutter from the frames).

Material and Labour rolled mild steel sections conforming to Fe-290, Gde E-165 as in door frame etc including cutting, welding, bending, natching etc all as specified and directed.

Material and Labour for flush shutters 30mm thick solid core const with block board core and plywood face panels commercial type on both sides.

Supply and fixing of 35 mm thick factory made 2nd class hardwood,pain framed panelled shutters (any number of panels) with panels of 9 mm thick BWP commercial ply,kiln seasoned and chemically pressure treated fixed to chowkhat.

Supply and Fixing butt hinges 100mm size MS cold rolled medium weight.

Supply and Fixing handle 150mm size aluminium cast type anodize.

Supply and Fixing tower bolt 150mm aluminium anodized of extruded section.

Supply and Fixing 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast-aluminium alloy and fixed.

Material and Labour Iind class H.W. plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete.

Forming jambs etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete cement mortar 1:4.

Making good under cills or over arches, lintels and bressumers, including all pining when necessary CM 1:4.

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size

(a) 15 mm bore

(b) 20 mm bore

(c ) 25 mm bore

Supply and fixing of GI water tubing,medium grade with fittings,fixed to wall and ceiling or laid in floor of size

(a) 15 mm bore

(b) 20 mm bore

(c ) 25 mm bore

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps cills for concealed water tubing and making good cutting n. exc. 10 cm girth in stone walls.

Supply and Fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete. (Make-Nirali/Prayag/Jayna/Pearl)

Supply and Fixing vitreous china wash down water closet pan pedestal pattern white incl flush pipe incl white seat cover with MS Cr plated hinges fixed in repair.

Supply and Fixing in repair vitreous china wash hand basin size 550x400mm white flat back including brackets, PTMT 32 mm waist coupling , PVC 32 mm dia down pipe, 15mm bore 450 mm long PVC PTMT connection incl brass screws and cup washer complete fixed in repair.)

Supply and Fixing, in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe.

Supply and fixing in repair pillar taps cast copper alloy with capstan heads, chromium plated,fancy type of size 15 mm bore screwed down high pressure,with or without lettered'Hot' or 'Cold' with long screwed shanks and flynut,screwed for 15mm iron pipe. (Make -Plumber/Jaquar Essco/Coronet)

Supply and Fixing in repairs CP brass towel rod 15mm dia fancy type 60cms long of Jaguar or equivalent as approved by Engr-in-chare.

Disconnecting existing tanks exc 250 ltr but not exc 500 ltr, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 500 ltr but not exc 1000 ltr, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position.

Dismantling of water tanks of size exc 250 & not exc 500 litres capacity.

Dismantling of water tanks of size exc 500 & not exc 1000 litres capacity.

Supply and Fixing for Rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make:- Sintex/ Rotex/ Polycon/Vectus)

Supply and Fixing for Rotational moulded polyethylene water storage tank of capacity exc 500 ltrs & not exc 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make:- Sintex/ Rotex/ Polycon/Vectus)

Material and labour for preparation of new wooded surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Supply and Fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (Make: Parryware/Jaquar/Prayag)

Demolition cement concrete in any position not other wise specifically provided for

Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately)

Supply only liquid water proofing compound

Material and Labour for 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab. After the plaster is cured the roof will be tested for water tightness by pounding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.

Material and labour for carrying out water proofing treatment for roofs in the following stages and as directed :-

The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.

Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.

(iii) After the application of approved bituminous primer the APP modified polymeric membrane of thickness 3 mm & weight not less than 3.50 Kg/Sqm shall be laid & sealed on the primed surface by torch application as per manufacture instructions. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be made as a monolithic layer. (Make-M/s STP Ltd/M/s Texa India Ltd/ M/s IWL Ltd)

A fillet of PCC 1:2:4 of 100 x 100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/ junctions should be rounded.

Applying two coats of silver shield aluminium based paint @ 0.1 Kg/Sqm each coat over APP membrane.

Haritwal traders

Choudhary Traders and Engineers

boon construction company