Construction of 3 nos of E type Residential Staff Quartesrs of Sub-Registrar office, Chiktii, Ganjam for the year 2025-26 as per Revenue and DM Dept letter No. 24675 dtd. 07.07.2025 Buildings.

Civil Work : Earth work in excavation of foundation in all kinds of soil including stoney earth and gravels mixed with stone boulders (except sheet rock & boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated materials at places away from work site with all leads including cost of all labour T&P required for the work etc complete and as per the direction of the Engineer in charge.

Supplying and filling in foundation and plinth with sand excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.

Filling in foundation and plinth with available excavated earth including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.Ground Floor

First Floor

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base Footing

Column Ground Floor

Column First Floor

Plinth Bend

Beam Ground Floor

Beam First Floor

Lintel Ground Floor

Lintel First Floor

Chajja Ground Floor

Chajja First Floor

Shelves Ground Floor

Shelves First Floor

Roof Slab Ground Floor

Roof Slab First Floor

Stair Case

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. Ground Floor

First Floor

2.5 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm downgraded size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge Ground Floor

First Floor

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. Ground Floor

First Floor

Painting two coats with Enamel PAINT of approved shade over a coat of primer to new wood work & iron work including sand papering to polishing to surface smooth with cost, convency, cost of all materials, taxes & labour with T&P etc. complete in all floors as per the direction of Engineer-in-charge.

First Floor

Providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) - Door frame 125mm x 65mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade) Calcium Carbonate and Natural Fibers (Wood powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full bdy treaded star headed screws having minimum frame density of 780kg/cbm & an ISO 9001-2015 Certified company having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2 Modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, Water/Moisture Proof & Fire reterdant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentification should be compulsory provided by the manufacturing company. Ground Floor

First Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor

First Floor

Supply and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complite with frame, shutters and all fitting and fixtures. Ground Floor

First Floor

Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator / Top Huge -60-Series duly manujfactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for oiuter frames, 75mmx60x2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced witgh hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened Glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No per set of sashes and the system is to V1. Ground Floor

First Floor

Supplying, fitting and fixing of vitrified tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:4) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing and polishing etc. complet

First Floor

INR Eighty Four Thousands Eleven and Paise Twenty Seven Only

First Floor

INR Thirty Nine Thousands Nine Hundred Ninety Eight and Paise Forty Two Only

First Floor

INR Three Thousand One Hundred Fifty Five and Paise Five Only

INR Three Thousand Six Hundred Forty Three and Paise Seventy Five Only

INR Ten Thousands Nine Hundred Forty and Paise Fifty Eight Only

First Floor

INR Forty Thousands Seven Hundred Sixty Five and Paise Eighty Nine Only

First Floor

INR One Lakh Seven Thousand Nine Hundred Seven and Paise Ten One Only

INR Twenty Four Thousands Twenty Four Only

INR Thirty Seven Thousands Four Hundred Ten Only

INR Thirty Eight Thousands Seven Hundred Nineteen Only

INR Three Thousand Two Hundred Forty Only

INR One Thousand Nine Hundred Seventy Four Only

INR Eight Thousand Two Hundred Sixty Five Only

INR Twenty Four Thousands Six Hundred Seventy Five Only

INR Eighteen Thousands Fifty Four Only

INR Five Thousand Three Hundred Twenty Five Only

INR Three Hundred Sixty Only

INR Six Hundred Forty Two Only

INR One Thousand Five Hundred Thirty Three Only

INR One Lakh Four Thousand Two Hundred Eighty Only

INR One Lakh Six Thousand Six Hundred Forty Only

INR Sixty Eight Thousands Forty Only

INR Seventeen Thousands Five Hundred Twenty Only

INR Twenty Five Thousands Two Hundred Only

INR Forty Seven Thousands Seven Hundred Ninety Three Only

INR Twenty Two Thousands Three Hundred Forty Only

INR Sixteen Thousands Two Hun

15mm dia CP angle stop cock(CON-CHR-053KN)

20mm dia CP Con. stop cock (CON-CHR-089KN)

15mm dia CP flange

15mm Cp extention piece

25mm brass full way valve

32mm brass full way valve

15mm dia C.P Pillar cock(CON-CHR-021KN)

125mmdia C.P.grating

15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)

Over Head Shower 100mm dia round (OHS-CHR-1999)

Shower Arm (SHA-CHR-477)

600mm X 125mm C.P glass shelf (ACN -CHR-1171N)

CP towel rail (25 mm)(ACN-CHR-1111N)

C.P towel ring(ACN-CHR-1121NMI)

Corner Glass Shelf with Bracket)(ACN-CHR-1173)

CP Soap Holder

15 mm dia CP Sink Cock(CON-CHR-357KN)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 1000litre capacity water storage tanks (Ist Floor)

Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 110mm dia UPVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door Tee

110mm U-PVC plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC off set

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

110mm dia U-PVC clamp

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. a.Cascade dual flushset (Hindware)No.92099

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with pedestall Parryware/Hind ware/Cera/Kerovit/Somany)

550mmx400mm size wash hand basin

Counter top basin 560x455 (Parryware make) white

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink- (Jayna make)

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cem

INR Five Thousand Nine Hundred Eleven and Paise Seven Only

INR Eleven Thousands Seven Hundred Two and Paise Twenty Nine Only

INR Three Thousand Eighteen and Paise Ten Six Only

INR Twelve Thousands Five Hundred Five and Paise Fifty Six Only

INR Six Thousand Four Hundred Two and Paise Eighty One Only

INR Eleven Thousands Five Hundred Five and Paise Twenty Only

INR Five Thousand Eight Hundred Forty One and Paise Ten Nine Only

INR Seventy Five Thousands Eighty Four and Paise Ten Four Only

INR Thirty Eight Thousands Seventy Seven and Paise Six Only

INR Eighty Three Thousands Three Hundred Eighty Six and Paise Seventy Nine Only

INR Eighteen Thousands Nine Hundred Sixty Six and Paise Seventy Four Only

INR Thirteen Thousands Four Hundred Three and Paise Twenty Only

INR Seventy Two Thousands One Hundred Nine and Paise Nine Only

INR Sixty Thousands Eighty Three and Paise Seventy Only

INR Sixty Nine Thousands Nine Hundred Forty Seven and Paise Seventy Only

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink- (Jayna make)

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.