SPECIAL REPAIR TO BLDG NO T-44 (SIGNALS, EDN AND ACCOUNTS) AT 54 ASP, AF UNDER GE (P) AF GURGAON

Amount

Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out joints, hacking for Key, scrubbing down with water, etc., and removing same from the site(s), complete all as specified and as directed.

M&L for rendering 15 mm thick in cement motar 1:6 on brick work or concrete surfaces other than fair face of brick work, finished fair & even without using extra cement all as specified and directed.

M&L for two coat of weather proof exterior grade over one coat of primer and two coat of JK/Birla Cement cement base putty on newly plastered surfaces complete all as specified and directed.

M&L for preparig New plastered surfaces of walls and applying two coat of distemper oil emulsion(OIL BOUND WASHABLE DISTEMPER) over a coat of chalk whiting, complete all as specified and as directed. Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services)

Dismantling of brick work built in cement mortar including all quoins, arches, pillars, etc.complete all as specified and directed.

M&L for brick work with sub class-B bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per srl item No. 6 here in before but except bricks Note:- Serviceable bricks obatined from srl item No-05 shall be re-used in srl item No.7 after cleaning etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F for 0.5 mm thick pre coated galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tensile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 1.00 mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling framed trusses span n exc 10M complete all as specified and directed.

Dismantling framed work timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

M&L for timber framed second class wrought hard wood in scantling for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and similar works complete all as specified and directed.

M&L for preparing surface of wood and wood based materials, new or old, applying two coat of creosote of any description and girth, not otherwise described and treated with complete all as specified and directed.

S&F in repair second class hard wood wooden chawkhat clean sawn single rebeted wrought on all surfaces for cup board chawkhats complete all as specified and directed.

Dismantling of wall / ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thiockness including cover fillets complete all as specified and directed.

S&F 8 to 10 mm thick densified regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermedate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl 4 to 6 mm dia GI wire hander adjusting level fixed to roof, trusses/purlines by means of cleats made out of GI flat 40x3 mm size 600 mm long complete all as per manufacturer instructions, specified and directed.

S&F in repair 8 to 10mm thick densifed regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm without disturbing the other false ceiling and making good existing frame complete all as specified and directed.

Cutting and grinding and repairing with cement in any colour over old Kota stone flooring/platforms including rubbing and mirror polishiing as per existing complete all as specified and directed.

Supply only water proofing liquid compound mix in cement concrete Make Dr fixit, M/S cico, Fosroc.

Dismantling of wall/ floor tile including backing coat any description or any thickness led and beded and pointed in any cement motar and removal to out of MD land complete all as specified and directed.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile of size 350x250x7mm or 450x350x7mm set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting, dado etc complete all as specified and as directed. Make:- Jhonson/Somany/Kajaria

M&L for non skid ceramic coloured tile 7 to 8mm thick square/rectangular area of each tiles exceeding 0.11 square but not exceeding 0.18 Sqm as in floor over 10mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and as directed. Make:- Jhonson/Somany/Kajaria

M&L for vitrified tiles 7 to 8mm thick square / rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 15mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed.

S&F in repair vertical blinds for windows/door/ventilator of any colour and pattern as approved including connected items ie. rod, hook etc and complete fitting complete all as specified and as directed.

Dismantling of mild steel work of any description not other wise provided of complete all as specified and as directed.

S&F for MS angle iron as in posts, gate, door frame and struts, window grill in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B complete all as specified and as directed. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using DG sets or any alternative arrangement complete all as specified and directed.

M&L preparation of new steel surface exc 10 cm width/girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repair stainless steel tubular curtain rods 25mm dia and 16 gauge fancy type with brackets ,stops, rollers fixed etc. complete all as specified and directed.

S&F PVC Sheet wall panelling of thickness 5 mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5 mm thick prelam PVC sheet. The panel & strips shall be manufactured by an ISO-9001-2008 certified Company. The strips should have in their center grove of 6 mm wide and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strips by using PVC fasterners. The distance between two screw shall bot be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondly of the grid may vary depending on the size of the wall. Optionally a strips of 5 mm thick PVC sheet of width 75 mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified including dismantling of existing and directed.

Taking down chowkhats and frames with shutters without taking out shutters from the frames exc. 1.5 sqm but n exc. 4 sqm each, complete all as specified and directed.

Taking down chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame complete all as specifed and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; in the frame at site complete all as specifed and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube,as per specification & drawings complete all as specifed and directed.

S&F polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium powder coated fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board/ DG grill to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal and equvalent).

S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour podwer coated aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed. Note:- Glass and wire mess/ DG grill shall be measured and paid separately under appropriate item of sch A.

M&L for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the particle board with rubber gasket, complete all as specified and directed. Make. Anchor/Kitply/Novapan

S&F powder coated aluminium grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

Demolition of cement concrete in ground floor and paving nexc. 15 cm thickness below or above ground floor complete all as specified and directed.

M&L for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 60 mm thick machine pressed pre casted pressed cement concrete interlocking paver blocks glazed coloured up to 6mm on the top in any shape and size, strength not less than M-35 laid over and including 25mm thick sand cushioning under paver blocks complete all as specified and as directed

S&F in repairs vitreous china coloured half stall urinal with brass chromium plated brackets , fitting and waste coupling, CP bottle trap , urinal spreder , PVC connection etc. complete all as specified and as directed.

S&F in repairs vitreous china squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete and P traps complete all as specified and as directed.

S&F in repairs china wash down water closet pan (pedestal pattern), including 10 ltr flushing cistern valveless, syphonic action type high level with inlet ball valve float and flush pipe etc complete all as specified and as directed.

M&L for cutting in brick work around cast iron soil/waste pipe bend /Tee and open the joint carefully and filled with cement mortar 1:2 with hardener and tested upto one week and making good with cement plaster 1:2 with hardner including match with existing surface 100 mm bore complete all as specified and as directed.

M&L framed work such as grills, gratings,etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and like fencing post and similar work confirming to Fe-290, Gde-E-165 (Angle 50x50x6, round bar 10mm, Flat iron 40x6, Steel gate 40x40x6) complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in foundtions, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in foundtions, filling and mass concrete complete all as specified and as directed.

S&F 40mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 100mm long medium grade stainless steel butt hinges bright polished fix to steel chowkhat with nut and bolt or screws of required size complete all as specified and as directed.

S&F stainless steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and as directed.

S&F 250mm long, 16mm dia stainless steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos fixing with nut & bolt complete all as specified and as directed.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm long complete all as specified and as directed.

S&F mild steel pressed handles, oval type, stove enamelled black 150mm long fancy type complete all as specified and as directed.

S&F for steel water tubing 15mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl. taking down old GI pipe complete all as specified and as directed.

S&F for steel water tubing 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl. taking down old GI pipe complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, unshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repair rotational moulded rplyethylene (HDPE) water storage tank 1000 litre capacity (Cylindrical Vertical with Closed Top), black in Colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unserviceable Water Storage Tank with float valve of any description complete all as specified and directed.

S&F in repair chromium plated fancy type foam flow bib taps 15 mm dia cast copper alloy with crutch or handle screwed down, screwed for iron pipe complete all as specified .

S&F in repair angle valve 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed.

S&F in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed.

S&F in repair for vitreous china wash basin hand white flat back size 550x400 including cutting for and pinning in ends of brackets including fixing of 32 mm low dencity polylethyne pipes (LDPE) of pressure rating 6kg/cm2,coupling ,PVC connection with 15 mm dia PTMTcheknuts ,brackets complete all complete all as specified and as directed.

S&F in repair 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one complete all as specified and as directed.

S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed.

S&F towel rail of size is 600mm long of stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair plastic WC seat cover of any colour for pedestial pan , closed pattern with flat bottom & cover including MS chromium plated ,aluminium hinging devices complete all as specified and as directed.

S&F in repair health faucet (brass) with hook & 1.5mtr tube complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified and directed.

S&F in repair stainless steel floor grating with hole or without hole complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth without using extra cement complete all as specified and directed.

S&F in repair ISI marked hydraulically regulated door closer aluminium (extruded section) body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed.

M&L second class hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as directed and specified.

S&F 18mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site/Sch of credit and making good disturbed surface of walls, floors, etc., complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush boxes and modular face plate complete all as specified and as directed for the followings. Note:- The works includes cutting of chasis and making good disturbed surfaces and the rates forthe same deemed to included in quated rate:- Make of cable: Havells/finolex/Polycab

One light point controlled by one way modular switch all as specified and directed.

One ceiling/mounted fan point controlled by one way modular switch all as specified and directed.

One exhaust fan point controlled by one way modular switch all as specified and directed.

One 3 pin modular socket outlet 5 amps on the same board with the other switches, with cable 1.5Sqmm size.

All items in 80.04 but on independent board

One bell/buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5sqmm size

All as per the item ser No 80.00 here in but with copper conductor cable for 3pin socket outlet,15 Amps independent with cable 4sqmm size and 4 sqmm earth continuity conductor, complete all as specified and as directed by Engr-in-charge. Make of cable : Havells/Polycab/Finolex

M&L for sub main wiring along with earth wire with the following sizes of 2x 6 sqmm and 1x 6.00 sqmm earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC conduit of adequate size and length with all accessories and fiiting like bends, elbow etc complete all as specified and directed. Make of cable : Havells/finolex/Polycab Note:- 02 run of 6 sqmm main cable and one run of 6.0 sqmm earth wire and one run of PVC conduit will be measured as one unit)

Supply and fixing ceiling rose surface bakelite 65 x 50mm, 3 terminal complete all as specified and directed.

Supply & fixing ceiling fans complete 1200 mm pearl white 230 V,1200 mm sweep complete all as specified and directed.

Supply and fixing modular fan step regulator, 120W - 2 module complete all as specified and directed.

Supply and fixing exhaust fans Single Phase 230/240 V of size 300 mm swep with louver complete all as specified and directed.

Supply and fixing sheet metal enclosure with MCB , single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed.

S&F indoor decorative LED batten with extruded aluminium powder coated housing & opal diffuser. IP20 of 20W complete all as specified and as directed.

S&F of environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling 2x2 Recess fitting of 28W Havells Cat Part No: PLUTONEO2X2PLR28WLED840S or equivalent make: Halonix/Bajaj

Supply & fixing modular socket, 6A-2/3 pin combined 2 module complete all as specified and as directed.

Supply & fixing modular switch socket combination outlet 3 pin, 5 Amp flush type complete all as specified as and directed.

Supply & fixing switch socket combination 16A, 6Pin, 3 Module independent complete all as specified and as directed.

Supply & fixing modular switch 1way 6A,1 module,complete all as specified and as directed.

S&F ding dong bell, single phase, 230 volt AC, 50 HZ, complete all as specified and as directed.

S&F modular bell push 6A, 1 Module complete all as specified and as directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed.

Hanging only exhuast/mounted/ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking out old submain wiring of any size and removing material / take as sch of credit including making good of existing surfaces complete all as specified and as directed.

Taking out old DB box of any size and removing materials to store or as sch of credit including making good of existing surfaces complete all as specified and as directed.

Supply and fixintg sheet metal enclosure for DB's when MCBs to be used triple pole & neutral 16 way with 200 Amps rated bus bar complete all specified and directed.Make: Havells/L&T/Legrand

Supply and fixing sheet metal enclosure for DB's when MCBs to be used triple pole & neutral 12 way with 200 Amps rated bus bar complete all specified and directed.Make: Havells/L&T/Legrand

Supply and fixing sheet metal enclosures for DB's when MCBs to be used single pole & neutral 12 way with 200 Amps rated bus bar complete all specified and directed. Make: Havells/L&T/Legrand

Supply and fixing sheet metal enclosures for DB's when MCBs to be used single pole & neutral 8 way with 200 Amps rated bus bar complete all specified and directed. Make: Havells/L&T/Legrand

Supply and fixing sheet metal enclosures for DB's when MCBs to be used single pole & neutral 4way with 200 Amps rated bus bar complete all specified and directed. Make: Havells/L&T/Legrand

S&F MCB four pole 415V 100 Amps complete all specified and directed. . Make- Legrand/C&S/HavellsDHMJCFPF100

S&F MCB SP 240 volt 63 Amps complete all specified and directed. Make –Legrand / C&S /Havells

S&F MCB TP 415V 63 amps complete all specified and directed. Make- Legrand/C&S/Havells

S&F MCB SPN 240V 63 amps complete all specified and directed. Make- Legrand/C&S/Havells

S&F MCB SPN 240V 40 amps complete all specified and directed.Make- Legrand/C&S/Havells

S & F MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10KA, 6-32 Amps complete all specified and directed.Make- Legrand/C&S/Havells

Dismantling and taking up old existing unserviceable GI earth plate with GI strip earthing and connected items and making of good the existing surface complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead with 4mm dia by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 5 including earth work final with watering arrangement, wire mesh, GI pipe 50mm internal dia bore buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and RCC chamber cover in 1:2:4 type B1 using 20mm graded stone aggregate of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m complete all as specified and directed including testing on completion.

Phogat Builders

M/S Parshant Associates