REPAIR TO JOINERY, PLUMBING, TILLING, FLOORING, PLINTH PROTECTION, PLASTERING IN MD ACCN, REPAIR TO FLOORING, PLASTERING, ROOF SHEETING ETC IN OTM ACCN AND REPAIR/ REPLACEMENT/ CLEANING OF SEWAGE LINE, MANHOLES ETC AT JAK LI RC UNDER GE 970 EWS

Amount

Taking up or down GI Water Tubing/PPR pipes 15/16mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

Description all as per ser Item No. 1 above but for 20mm dia (Bore)complete all as specified and as directed.

Description all as per ser Item No. 1 above but for 25mm dia (Bore)complete all as specified and as directed.

M&L for 3-layer PP-R (Polypropylene random copolymer) outer diameter of pipes 20 mm (Inner dia 14.40 mm) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Description all as per ser Item No. 04 above but outer diameter of pipes 25 mm (Inner dia 18.00 mm) complete all as specified and as directed.

Description all as per ser Item No. 04 above but outer diameter of pipes 32 mm (Inner dia 23.20 mm) complete all as specified and as directed.

S&F in repair 20mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed

S&F in repair 25mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L for preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, incl providing 25mm dia GI spout pipe projecting 0.25mtr beyond the external face of wall complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-0 as in Sunken Portion of WC/Bath room (using 12.5mm graded stone aggregate) complete all as specifed and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 100 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Description all as per ser item No 18 above but except bricks complete all as specified and directed.

M&L for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Formwork to soffits of suspended slabs such as use & waste roof slab, floor slabs landings and sgh finished surfaces of concrete flat complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate) complete all as specified and as directed.

M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed

M&L for 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for double charged premium quality Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed.

M&L for double charged premium quality Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles tiles not exceeding 0.36 sqm, in skirting/ dado or verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed

M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Johnson Endura premium paving tiles of techno commercial or equivalent of size 40cm x 40cm x 10 mm thick, set, jointed and pointed in neat cement slurry in floors, laid over 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed.

S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete all as specified and as directed.

S&F in repair 15mm dia bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete complete all as specified and as directed.

S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and as directed.

S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

S&F PVC waste pipe 32mm dia of cup with over all length of pipe 90cm complete all as specified and directed.

S&F PVC urinal waste pipe 50 mm dia of cup with screw and over all length of pipe 90cm complete all as specified and directed.

S&F Soap Dish CP Stain Less Steel complete all as specified and as directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F Peg Set of 6 with base plate stainless steel complete all as specified and as directed.

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) complete all as specified and as directed.

S&F Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and as directed.

S&F Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed

Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and as directed.

S&F in repair vitreous China squatting pan, Orissa pattern incl PVC trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in cement concrete (1 cement, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and as directed.

S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed.

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S&F wash hand basin of vitreous china counter sunk size 560mm x 410mm x 180mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S&F Vitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed.

Supply and fixing sinks with out drainage board made of stainless steel 0.75mm thick kitchen or laboratory, overall size 430mm x 510mm bowl size 430mm x 380mm x 203mm complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S&F in repair PVC Connections 600mm long complete all as specified and as directed.

S&F in repair Aluminium Grip (Hot & Cold) connections pipe for Basin Mixer/Geyser/Hot and Cold connection pipe Hose Pipe of length 600mm long fixed, complete all as specified and as directed.

Dismantling of PVC / CI pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

Dismantling of PVC / CI pipe 75mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floorsand making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed.

S&F in repair PVC 110 mm bore Bend complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door in 110 mm bore complete all as specified and as directed.

S&F in repair PVC 75 mm bore Bend complete all as specified and as directed.

S&F in repair PVC 75 mm bore Bend with access door complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door in 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S & F in repairs for PVC (SWR) floor/Nahani trap 75 mm dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and as directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast complete all as specified and as directed.

M&L Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary s&f lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

M&L Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary s&f lugs, Butt hinges, lock strike plate, etc complete, size of frame 105 x 60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

S&F 35 mm thick, factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and as directed.

S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings andcomplete all as specified and as directed.

Supply and fixing for aluminium alloy anodized (powder coated) door fame and shutters with hollow aluminium anodized section as specified, shutter (two panels) fully glazed / partly glazed or fully panelled with and including 18mm thick (both side) prelaminated block board exterior grade / 5.5mm thick tinted or plain glass including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf, stainless steel hinges 3 Nos etc. including fixing frame to brick wall/ RCC members with rawl plugs complete all as specified and directed. Sections of doors shall be aluminium hollow sections as follows:- (a) Door frmae single groove 101mm x 44mm x 3mm thick. (b) Shutter top 83 mm x 44mm x 3mm thick. (c) Shutter bottom 114 mm x 44mm x 3mm thick. (d) Shutter vertical top 85 mm x 44mm x 3mm thick. (e) Shutter middle 83 mm x 44mm x 3mm thick. (f) Gauging clip weighing not less than 0.0978kg/metre. NOTE: (i) The rates shall be inclusive of supply & fixing of rubber packing / gasket, SS wire mesh & glass pane of sutiable size and all necessary arrangement to fixing frame with brick wall / concrete surface. (ii) The rates shall be inclusive to make good the damage portion of brick wall / concrete surface with PCC 1:3:6 & CM (1:3) to match with existing surface.

Material & labour Three Track powder coated anodised aluminum frame and shutters for windows and ventilators with for anodised aluminium shutters for windows and ventilators with for anodised aluminium shutter two Nos fully glazed 5.5 mm thick tinted or plain glass with one No shutter having stainless steel mosquito proofing net 0.63 mm dia with 1.40 mm aperature with and including necessary rubber packing aluminium beading and necessary locking arrangement and powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed. Sections of window shall be aluminium sections as follows:- (a) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 1.065 KG per RM. (b) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 0.929 KG per RM. (c) Shutter bottom and top 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. (d) Shutter sides 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. NOTE: (i) The rates shall be inclusive of supply & fixing of rubber packing / gasket, SS wire mesh & glass pane of suitable size and all necessary arrangemetn to fixing frame with brick wall / concrete surface. (ii) The rates shall be inclusive to make good the damage portion of brick wall / concrete surface with PCC 1:3:6 & CM (1:3) to match with existing surface.

Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified and as directed. (Note:- Glass pane and mesh will be measured and paid separately )

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F of 12 mm thick Toughned Glass Door with patch fittings with cover plate of SS304 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450 MM suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed. Make : All fittings shall be Ozone or equivalent .

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required with patch fittings with cover plate of SS304 Grade, necessay accessories etc, complete all as specified and as directed.

S&F self-adhesive Sparkle designer frosted film/and / or One-way Vision Film to 12 mm glass partitions / doors as per approved pattern and design complete as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and as directed.

S&FSheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and as directed.

S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by GE) complete all as specified and directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and as directed.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

Supply & fixing Stainless Steel butt hinges medium weight of 100mm long complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified and as directed. NOTE -WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and as directed.

Supply only WPC complete all as specified and directed.

M&L for 2mm thick wall care putty on wall complete all as specified and as directed

Preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all as specified and as directed.

M&L preparing new plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall applying a layer of wall care putty 2mm thick (averaging) , Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but not exc 1000 ltr capacity complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling water tanks of capacity exc 1000 butn.exc 2000ltrs complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 2000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, height upto & inl triple sotrey bldg as specifiedare to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified. but the work to be carried at an height of more than 4 m and upto 12 meter from FFL complete all as specified and as directed. (Note. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be this aspect and nothing extra shall be admissible on this account.)

Pre-painted galvalume aluminum zinc coating GI based designed steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws using torque adjustable electronic gun screws drills of suitable capacity but the work to be carried at an height of more than 4 m and upto 12 meter from FFL complete all as specified. . (Note. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be this aspect and nothing extra shall be admissible on this account.)

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed.

S&F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work.

S&F Powder coated galvanised iron frame work for seamless ceiling size 600mm x 600mm with main runner 38 x 24 x 0.90mm thick, cross tee 29 x 24 x 0.90mm thick and wall angle 24 x 24 x 0.90mm thick duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and as directed.

S&F 6mm thick Non Asbestos fibre cement building boards/Pre Laminated self embossed texture designer E-Board classic (Size 0.60M x 0.60M/0.60M x 1.2 M), HPSC (High pressure steam cured) to be fixed or laid/inserted to existing/new timber/GI/Aluminium/MS framework with screws as in ceiling complete all as specified and directed.

M&L for 2nd class soft wood exc 13 sq cm & n.exc 25 sq cm, Plain fillets, suare, rectangular or triangular in section, clean sawn, bullnosed, splayed, chamfered or rounded on one edge or face, secured with nails or brads complete all as specified and as dirceted.

M&L Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed

M&L Veneered decorative plywood 9mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed

M&L for PVC 5 to 6mm thick hollow PVC Ceiling as in flat surface including all fixing viz, U and L as design and pattern, including Gl frame work as flat surface approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and as directed.

M&L for PVC 8 to 9mm thick hollow PVC Ceiling as in curved, sunken or raised surface of any design as approved including all fixing viz, U and L as design and pattern, inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and as directed. Note :- Flat area will be measured.

Supply and fixing in repair PVC Vinyl vertical blinds replacement slats curved smooth of colour Indoor window blinds incl Idle End Cap, Shaft Support, Top Corrier, Carrier, Title Shaft, Spacer Link, Track, End Stop, Wand Control Box and all fixing arrangement opening and closing of the Louver is done in the Card and angle adjustment is done by the operation wand complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete all as specified and directed.

M&L for cleaning of SGSW /RCC/PVC sewage line upto 250mm dia by rodding/auger rods & drain pipe machine as required for one manhole to another manhole including gully traps and getting out the sludge from any size of manholes and gully traps, before & after cleaning process of SGSW /RCC/PVC sewage line and well flushing using clean water through water bowser of pipe of any capacity (arranged by the contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed.

M&L for dewatering of contaminated waste effluent from septic tank soakage well of any capacity by sewer jetting cum suction machine vehicle/ honey sucker machine vehicle from any location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.

M&L for Cleaning of septic tank of any capacity and depth incl inlet chamber, outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid/semi solid sludge to liquid state by using extra water provided by the contractor if required and getting out through sewer jetting cum suction machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed. Notes : (a) Cost of excavation of pit and covering the same with earth is to be included in unit rate. (b) Note for item no. 1 to 3:- (i) The contractor/site superivisor will attend the complaint cell of AGE B/R-II to receive the complaint slips daily at 09:00 hrs to carry out the complaints within 48 hrs from receipt of complaint slip and completion report will be submitted to concerned JE/AGE.

Excavation in trenches, n exc 1.5m wide n exc 1.5m in depth: for foundation, etc, or for shafts , wells cesspits, manholes, pier holes, etc . n exc 10 Sqm on plan and n exc 1.5m in depth and getting out, in any type of soil complete all as specified and directed.

Description all as per ser item no.146 above but depth exc 1.5m and not exc 3 mtrcomplete all as specified and directed.

Demoliton/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as spd of 150mm dia pipe complete all as specified and directed.

M&L PCC type D2, 1:4:8(40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars laid in trenches in concrete padding jointed in cement mortar 1:1 complete all as specified and directed.

M&L 200 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars laid in trenches in concrete padding jointed in cement mortar 1:1 complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 for 150mm bore complete all as specified and directed.

.M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 for 200mm bore complete all as specified and directed.

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated materials to a distance not exc. 50 mtr and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L plain cement concrete type B1 1:2:4 (20mm graded aggregate) as in benching,copings etc, including necessary form work complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B1 smooth finished and reforming benching as required of 150mm dia pipe complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manholes etc) with plain fair faces, complete all as specified and directed.

Supply and fix in repair Vitreous china urinals, bowl type flat back, size of 600x 355x265 mm white with grating and union for discharge pipe, PVC waste pipe incl fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws,complete fixing in repair complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, fancy type, with or without lettered Hot or Cold with long screwed shanks and fly nut for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed.

S&F in repair stop cock, Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair Grating doom 125 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair PVC (SWR) bends/ shoes any radius of 110 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends/ shoes any radius of 75 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

Description all as per ser item No 163 above but 75mm bore complete all as specified and directed.

S&F in repairs PVC 'P' or 'S' of 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

S&F stacks clamps out of 50mmx3mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of any bore pipe complete all as specified and directed.

M&L for Cement concrete1:5:10 type E-2 using 40 mm graded stone aggregate as in suncken floors complete all as specified and directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S MOHAMMAD YOUSUF RATHER (BID ID -3395103)

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS (BID ID -3394573)

M/S maqsood enterprises (BID ID -3395117)

M/S JAN BUILDERS (BID ID -3394712)

SOFI CONSTRUCTIONS (BID ID -3395089)

M/s A B CONSTRUCTION (BID ID -3394483)

G N Constructions (BID ID -3395132)

ms new dar water star (BID ID -3395048)