Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAccepted-AOC | ₹1.9 Cr | L1 | Accepted-AOC Lowest amt quoted |
| 2 | L2₹2.2 Cr+₹24.7 L (12.9%)Rejected-AOC | ₹2.2 Cr+₹24.7 L (12.9%) | L2 | Rejected-AOC Amt quoted higher than L1 |
| 3 | Rejected-Technical LANE NO 8 PHASE I IGC SAMBA JAMMU AND KASHMIR 184121 | SAMBA | SAMBA | JAMMU AND KASHMIR | 184121 | - | - | Rejected-Technical Disqualified |
| Sl No | Description | Qty | Unit | JMD Infratech L2 | Ace Engineering Infratech India L1 |
|---|---|---|---|---|---|
| 1.00Supply of store at FOR, shifting of store from to worksite and constrction of Gun Pit of size as mentioned below with RCC footings, PCC brick masonry wall, PCC flooring and SRT Roof complete all as per following store list, drg and technical specification att. (Note Quantities mentioned against each items are for total quantity required for execution of 8 Nos Gun Pit) | |||||
| 2.00 | Steel Roofing Trough ISI Marked 3048 mm long made out of 2 mm thick @ 46.22 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 560 | Nos | 6,500 ₹36,40,000 | 5,144 ₹28,80,640 Lowest |
| 3.00 | Steel Roofing Trough ISI Marked 2440 mm long made out of 2 mm thick @ 37 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 200 | Nos | 5,000 ₹10,00,000 | 4,300 ₹8,60,000 Lowest |
| 4.00 | Steel Roofing Trough ISI Marked 2134 mm long made out of 2 mm thick @ 32.36 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 184 | Nos | 4,500 ₹8,28,000 | 3,800 ₹6,99,200 Lowest |
| 5.00 | ISMB 450x150mm x 13.0 M minimum weight 72.40Kg/M with tolerance (-) 2% to (+) 5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 32 | Nos | 11,000 ₹3,52,000 Lowest | 95,000 ₹30,40,000 |
| 6.00 | ISMB 150x75mm x 8.60 M minimum weight 15.00 Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 16 | Nos | 2,500 ₹40,000 Lowest | 16,000 ₹2,56,000 |
| 7.00 | ISMB 150x75mm x 4.50 M minimum weight 15.00 Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 16 | Nos | 3,500 ₹56,000 Lowest | 8,000 ₹1,28,000 |
| 8.00 | ISMB 150x75 mm x 3.60 M minimum weight 15.00Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 32 | Nos | 4,000 ₹1,28,000 Lowest | 4,800 ₹1,53,600 |
| 9.00 | Loop Holes of size 1.12mx0.45m at outer side and 0.35m x 0.25m at inner side. A shutter of 8mm thick MS plate of size 0.35mx0.25m will be provided in loop holes with 02 Nos 75mm of size cold rolled MS hinges and 01 No MS tower bolt of size 150mm and MS handle of FI 20x3mm of 125mm size including angle iron (40x40x5mm) frame of size 0.35x0.25m. MS hinges will be welded to shutter and frame both sides. Two coats of synthetic enamel paint over a coat of primer. Make: TATA/RINL/ SAIL/ JINDAL or Equivalent to IS 808-1989 | 24 | Nos | 10,000 ₹2,40,000 | 4,900 ₹1,17,600 Lowest |
| 10.00 | Prefabricated steel door of size 900mmx 2100 mm to be provided with single shutter. Shutter frame will be made of MS angle 50mm x 50mm x 6mm and FI 25x4mm for braces. All fixing and locking arrangements like hinges, tower bolt, aldrop bolt, handle will be provided to door. Door Chowkhat will be made of MS angle iron 50 x 50 x 6 mm. Make: TATA/RINL/ SAIL/ JINDAL or Equivalent to IS 808-1989 | 24 | Nos | 20,000 ₹4,80,000 | 5,000 ₹1,20,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹8 L
Closing Date
11 Jun 2026, 6:00 pmClosed
Commanding Officer 235 Engineer Regiment
Commanding Officer 235 Engineer Regiment, C/o 56 APO
SUPPLY AND CONSTRUCTION OF 06 GUN PIT AT AKHNOOR AND 02 GUN PIT AT HAMIRPUR
2026_ARMY_767035_1
1008/6648/RFP/26-27/OPW DT 21 MAY 2026
Open Tender
Civil Works
Item Rate
120 days
Akhnoor and Hamirpur
As Per tender Documents
4 documents required · 4 mandatory
₹0
₹8 L
29 May 26
3 Aug 2026
22 May 2026
12 Jun 2026
22 May 2026
11 Jun 2026
29 May 2026
22 May 2026 - 26 May 2026
29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of store at FOR, shifting of store from to worksite and constrction of Gun Pit of size as mentioned below with RCC footings, PCC brick masonry wall, PCC flooring and SRT Roof complete all as per following store list, drg and technical specification att. (Note Quantities mentioned against each items are for total quantity required for execution of 8 Nos Gun Pit) | - | - | - | - |
| 2 | Steel Roofing Trough ISI Marked 3048 mm long made out of 2 mm thick @ 46.22 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 560 | Nos | 1.25 | ₹700 |
| 3 | Steel Roofing Trough ISI Marked 2440 mm long made out of 2 mm thick @ 37 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 200 | Nos | - | - |
| 4 | Steel Roofing Trough ISI Marked 2134 mm long made out of 2 mm thick @ 32.36 kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The SRT shall be applied two coat of synthetic enemal pant over one coat of red oxide primer. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 184 | Nos | 100 | ₹18,400 |
| 5 | ISMB 450x150mm x 13.0 M minimum weight 72.40Kg/M with tolerance (-) 2% to (+) 5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 32 | Nos | - | - |
| 6 | ISMB 150x75mm x 8.60 M minimum weight 15.00 Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 16 | Nos | - | - |
| 7 | ISMB 150x75mm x 4.50 M minimum weight 15.00 Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 16 | Nos | - | - |
| 8 | ISMB 150x75 mm x 3.60 M minimum weight 15.00Kg/M with tolerance (-) 2% to (+)5% including two coats of synthetic enamel paint over a coat of red oxide primer .Make: TATA/RINL/SAIL/JINDAL or Equivalent to IS 808-1989 | 32 | Nos | - | - |
| 9 | Loop Holes of size 1.12mx0.45m at outer side and 0.35m x 0.25m at inner side. A shutter of 8mm thick MS plate of size 0.35mx0.25m will be provided in loop holes with 02 Nos 75mm of size cold rolled MS hinges and 01 No MS tower bolt of size 150mm and MS handle of FI 20x3mm of 125mm size including angle iron (40x40x5mm) frame of size 0.35x0.25m. MS hinges will be welded to shutter and frame both sides. Two coats of synthetic enamel paint over a coat of primer. Make: TATA/RINL/ SAIL/ JINDAL or Equivalent to IS 808-1989 | 24 | Nos | - | - |
| 10 | Prefabricated steel door of size 900mmx 2100 mm to be provided with single shutter. Shutter frame will be made of MS angle 50mm x 50mm x 6mm and FI 25x4mm for braces. All fixing and locking arrangements like hinges, tower bolt, aldrop bolt, handle will be provided to door. Door Chowkhat will be made of MS angle iron 50 x 50 x 6 mm. Make: TATA/RINL/ SAIL/ JINDAL or Equivalent to IS 808-1989 | 24 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
Drawing.pdf
Additional Documents • 1.02 MB
RFP.pdf
Tender Documents • 1.53 MB
BOQ_859028.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .