PROVN OF CHAIN LINK FENCING FOR BLDG NO NP 09 J NP 10 J AND NP 11 L SITE 1 SARAGARHI PARK AND OTHER SANCTIONED WORK UNDER GE WEST FEROZEPUR CANTT

Amount

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, exc 1.5m deep but n exc 3.00 mtr and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 m in depth for foundations etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & direcetd.

Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum, getting out, returning, filling in , removing surplus soil to distance not exceeding 50.00 mtr and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and direceted.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Removing excavated material n exc. 50 mtr and deposting where directed at a level n exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for broken bricks hardcore of gauge n. exc. 63 mm , deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm , deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified

M&L PCC 1:4:8 (Type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete.

M&L for cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, fillings and mass concerte complete all as specified and directed.

Plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in , kerbs,bed blocks, copings , mud stop, rounded or chamfered on edges including form work complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

M&L precast kerb stone of size as specified with concrete mix 1:2:4 type B1 using 20 mm graded aggregate set in CM 1:4 complete all as specified and directed.

M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) foundations, including rafts, footings, foundation beams,plinth beams,bases for coulmns etc and all other similar works complete all as specified and directed.

M&L for reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) for walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and all other similar works complete all as specified and directed.

M & L reinforced cement concrete for Type B1 1:2:4 nominal mix using 20mm graded stone aggregate in slab supported on wall beams and columns in floor complete as as specified and directed.

M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) in coulmns, pillars,piers, posts and struts and all other similar works complete all as specified and directed.

M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in beams, cantileveres, bressummers, lintels over 1.50 mtr span and all other similar works complete all as specified and directed.

Supply only Sand

Supply only liquid waterproofing compound

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & as directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built inCM(1:4)

Cutting chases pinning in making good to facings where required and pointing in CM(1:3) to for concealed water tubing or concealed conduit wiring etc.., and making good cutting not exc 10cm girth.

M&L 18-20mm thick granite (Of any type ) work (Table rubbed and polished ) in steps ,Jambs pillars window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shadeof granite

M&L for formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

Use and waste of formwork to to rough finished curved surfaces faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

Use and waste of formwork to to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to rough finished concrete surfaces of sides of square, rectangular or polygonal pillars posts, struts, piers, coulmns and stanchions complete all as specified and directed.

S&F Stainless steel wire wire cloth 0.36mm nominal dia of wire and average width of aperture and 1.4mm and fixed with stainless steel wire staples all as specified and directed

S&F for cast iron work grade FG 150, unmachined, articles exc 5 kg each, in brackets , gully traps , gratings, railing, frames, manhole covers,fire and soot doors, dampers, soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

Supply and fixing rolled mild steel structural work as in post and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wires etc, flat iron fillets (for securing chain link, square /round bars for chain link fencing etc including all necessary drilling,bolting, welding or riveting etc and all other similar works conforming Fe-290 Gde E-165 complete all as speciied and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long , dia meter of neck 11 to 15 mm complete all as specified and directed.

M&L for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

Ditto all as per Item no-36 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified & directed.

Rolled mild steel plates (plain or chequrred) channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F rolled mild steel section of grade FE-410W (Gde E 250 quality A ) as in steel post/pillars of any shape (rectangular /circular/ square where connected to roof/ truss etc fixed with angle cleat, base plate etc

S&F of rolled mild steel as in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. conforming to Fe-410-W (Gde E-250) quality A.

S&F framed work as in sliding / side hung gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F stucural steel work in tubular / square tube trusses including special shaped washer , gusset/ bearing plate etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured)

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

Supply only mild steel galvanised chain link fencing made of 3.15 mm dia wire and 50mm x 50mm mesh.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No 47, but 0.80mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.

Material and labour fancy designed 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

M&L for 50 mm thick cement concrete type D-2, 1:4:8 ( 40 mm graded aggregate) as in sub base to flooring and other similar works complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 ( 40 mm graded aggregate) as in sub base to flooring and other similar works complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 type D-2 (using 40mm gd stone agg) as in sub base all as specified.

M&L for 50 mm thick cement conrete type B-1 1:2:4 (20 mm graded aggregate) as in plinth protection and other similar works finished even and smooth without using extra cement complete all as specified and directed.

S&F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm / 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

M&L coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

Material and labour rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical tiles and all other similar works complete all as specified and directed.

Rendering/plastering, 10mm thick in cement mortar (1:4) on concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc any descriptionall as specified.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

S&F PVC connection 15mm size PTMT nuts of length 450 mm.

100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.

75mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 75mm dia PVC (SWR) bends any radius

M&L in repair 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

Providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) as in levelling course over existing boundary wall for fixing of jaffri wall and all other similar works works complete all as specified and directed.

M & L for plain cement concrete Type C-1 (1:3:6) using 20mm graded stone aggregate as in copings, benchings water troughs and like including weathering, slightly rounded of chamfered angles and throating, with necessary form work all as specified and directed

Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

S & F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and paid separately.

M&L Machine cut kota stone slab flooring 18-22mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified

Kota stone slabs, 10-12 mm thick in riser of steps , dado machine cut as in skirting, set and jointed in cement slurry over & including rendering coat of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

M& L for dark shade Vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in dados/wall cladding set and jointed in neat cement slurry and pointed in white or coloured cemeent to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and direcetd.

M&L for vitrified light shade Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surfaces as in skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster in CM 1:4 complete all as specified.

M&L for vitrified light shade Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M & L for coloured glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as directed.

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:3 using liquidl water proofing compound on fair faces of brick work to be finished even and smooth(with out using extra cement) complete all as specified and directed. Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.)

M&L for internal plastering 10mm thick in cm 1:6 on fair faces of brick or concrete,surfaces finished even and smooth with out using extra cement all s specified and directed.

Material and labour rendering 10 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces compound finished even and smooth (without using extra cement ) all as as specified.

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement ) all as per manufacturer's instruction and as specified.

Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified.

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of water based primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L Preparing surfaces plastered or unplastered on walls apply two coats of oil Bound distemper over a coat of primer after finisishing wall surface with Birla/JK wall care putty

White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

M&L for 5.5 mm thick antilo sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors ,complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No 102 here in before but 20 mm dia.

S&F 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamp (grade-202 ) of flat 30mm x 2mm, 150mm long made to shape in each slab, making V grove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment and 10 mm thick cement plaster in CM 1:3 as backing course complete all as specified and directed.

M&L 18-20mm thick granite (Of any type ) work (table rubbed and polished ) in steps,jambs pillars window -cills cooking platforms and like in cement mortar (1:4) incuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 10mm thick screed/backing coat and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing,polishing complete all as specified and directed. Note:- Rate quoted by the contractor deemed to inclusive of the following:-.(i) Exposed edges to be rounded

S&F 4 mm thick sheet glass(Tinted glass) and glazing fitted with aluminium sections square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Ditto all as per above item No 106 but exc 0.5 Sqm

S&F 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.

S & F in rep of Gypsum Board 8 to 9 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire/rod shall not be less than 4.00mm thick all are included in the above mentioned item only.

S&F Table top Vitreous china Wash hand basin (Jaquar Model NO:CNSWHT:705) white concealed /under counter basin type fit under granite platform size 420X590X195mm in cluding CP bottle trap all other fixing arrangements all as specified and directed

M&F Corner glass shelves with CP rail 225mm radious,6mm thick as per sample radious for bath room, fixed on suitable support all as specified and directed

S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type640X360X690 (monolithic flush cistern type)Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed.

S&F CP single Towel Rod 600mm long r (Jaquar model NO:AHS-1507)including with all fixing arrangemetns as fixed in repairs and all as specified and directed

S&F brass CP Angle /Stop cock (Jaquar model No: LYR-CHR-38053)with long shank and cup (concealed type) with wall flange 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs

S&F CP Toilet paper holder with flap cover (Jaquar model No:AKP-CHR-3573P/ AQN-7753) fixing with all necessary arrangementsscres etc.., all as specified and as directed

S&F CP double coat hook (Jaquar model NO:AQN7761)including with all fixing arrangemetns and all as specified and directed

S&f Soap dispenser push button model (Jaquar Model NO:SDR-WHT-DJ0010F)capacity 0.8 ltr of ABS body fixed all as per manufacturing instructions and all as specified and directed.

S&F CP Towel Rack 600mm long with out hangersand with lower hanger (Jaquar model NO:AHS-1581)including with all fixing arrangemetns and all as specified and directed

S&F 600mm long glass shelf with ss railing (Jaquar Model NO:AKP-CHR-35771P)including with all fixing arrangemetns and all as specified and directed

S&F looking mirror(900x600x6 mm) with frame and all as specified and directed Make :- Prayag (Model No : BLM-03F)

S&F as in repair CP grating round 125 mm complete all as specified. Make:- Prayag Cat No BA-40 or Equivalent

S&FPowder coated of ( any colour ) aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete as fixed in reapairs all as specified as per manufacturers instructions. Note: EPDM Rubber beading/gasket measured and paid seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

S&F 15mm dia Piller cock with swan neck table mounted with 170mm long swivel spout for granite kitcehn platform with counter sunk kitchen sink mixer(hot and Cold) with 450mm braided connection pipe (Without POP UP)Make: CERA Cat No:F3001581 and equvalent

S&F Two Way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) (Make:Jaquar) CQTNO;23041/FLR 8041N) and Make: CERA catNo:F3002161 /F2002161 15 mm dia bore type with handle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs

S&F 15mm dia Wash Hand Basin mixer(hot and Cold)(Table mounted Model) with extended spot type with 450mm braided connection pipe (Without POP UP) Make: CERA Cat No:F 3002581/Jaquar Cat NO:CQT-233321B

S&F in repairs Health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge. Make:Jaquar cat No: ALD-CHR-585; Cera Cat NO:F8030103,Prayag No:1871

Material and labour for complete overhauling of existing steel gate of 3.60 x 3.60 mtr size size including all welding works, making in plumb, greasing,easing , repainting in specified ornamental colours, hanging gate in existing RCC pillars including cement concrete type B1 (1:2:4) 20 mm graded aggregate bed block of size 0..30 x 0.30 x 0.45 mtr and all other connected works to make the gate functional in all respects complete all as specified and directed by Engineer-in -Charge.

Cutting out RCC, brickwork or stonemasonry (existing boundary wall top), forming toothings for and bonding new designer RCC pillars for fixing RCC jalli in mortar into old work, using cement concerte type B-1 1:2:4 complete all as specified and directed.

Providing, precast contemporary designer cement concrete pillars Type B1 1:2:4 (20 mm graded aggregate) for fixing of RCC designer jalli over walls and all other similar works , including chamfers,m weatherings, throating etc. and setting in cement mortar 1:4 complete all as specified and directed.

Providing precast contemporary designer cement concrete jallies Type B0 12:4 (12.5 m graded aggregate) , 40 mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 to frame work complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new surfaces of walls/jafri by scrapping/rubbing and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over one coat of primer complete all as specifeid

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors ,etc.

M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor multi stranded of size 1.5 Sqmm, single core, in and including rigid non metallic PVC conealed conduit, medium grade of suitable size (not less than 20 mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holders and sketch fittings etc) and new MS pressed steel/cast iron sunken boxes of suitable size for mounting switches/bell pushes/sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continous earth wire of size 1.5 Sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the following:- (a) One light point/fan point controlled by one single pole one way switch. Make : Havells/Polycab/Anchor/Finolex

(b) One bell point controlled by one single pole one way switch. Make : Havells/Polycab/Anchor/Finolex

(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amps switch. Make : Havells/Polycab/Anchor/Finolex

(d) One 5 Amps socket outlet same board controlled by one single poles 5 Amps switch. Make : Havells/Polycab/Anchor/Finolex

All as per item No -2 above but One 15 Amps socket outlet controlled by one 15 Amps suitable wiring with 4.00 Sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductor with continuous earth wire of size 2.5 Sqmm PVC insulated FRLS, unsheathed,multistranded copper conductor cable all as specified and directed. Make : Havells/Polycab/Anchor/Finolex

S & F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular step type regulator,120 W - 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular Bell push 6A, 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand

S & F in repair Modular white cover plate with frame, 2 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 3 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 4 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 6 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 12 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 18 module complete all as per specified and directed.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED lamp. Make: Anchor/Plaza//Havells/Legrand

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked. Make: Anchor/Plaza//Havells/Legrand

S & F bell ding dong AC 230 volts single pole complete all as specified and directed. Make: Anchor/Plaza//Havells/Legrand

Supply and fix exhaust fans AC single phase 230 V, of size 200 mm sweep with louver plastic body. Make : Bajaj/Crompton/Havells/Orient

Supply and fix wall mounted fan 300mm sweep single phase 230V complete all as specified and directed. Make : Bajaj/Crompton/Havells/Orient

Supply and fixing of 1400 mm sweep Ceiling fan AC single phase 230 Volts complete all as per specified and ditected. Make : Bajaj/Crompton/Havells/Orient

Supply and fixing of LED Mirror light 6 Watt adjustable type enegy saving curve type complete all as specified and direceted. Make : Havells/Bajaj/Crompton/Phillips

Supply and fixing of LED Wall bracket light 16 Watt decorative type enegy saving complete all as specified and direceted. Make : Havells/Bajaj/Crompton/Phillips

Supply and fixing of LED Bed lamp suitable for fixing in wall 6 Watt adjustable type enegy saving complete all as specified and direceted. Make : Havells/Bajaj/Crompton/Phillips

Supply and fixing of LED hanging Table lamp suitable for fixing in ceiling 10 Watt adjustable type enegy saving complete all as specified and direceted. Make : Havells/Bajaj/Crompton/Phillips

S&F LED Ceiling Light 36 Watt (2x2) 240 volts, energy saving complete with all caeessories including diriver, coneection up to the light fitting all as specified and directed. Cat part No : LCPL-36-CDL(2X2) Make - Cropmton or equivalent to Havells/Bajaj/Philips

S&F LED Ceiling light 15 W square surface type 240 Volts, energy saving complete with all accessories including driver, coneecting up to the light fitting all as specified and directed. Cat Part No LSDE-15-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LCTL-18-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

Supply and fix LED Post top lantern 10 Watt ip 65 rated LED bollard with robust design and efficient light distribution including suitable size of junction box for connection all as specified and complete with all accessories. Make : Havells/Bajaj/Crompton/Phillips

S & F LED Security light fitting 1 X 30 watts with bracket (for housing security light fittings) made of GI pipe 25 mm dia light grade 0.6 mtr size duly cutted and welded at an angle of 120 degree and fixed to wall with suitable MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed. Cat Part No LSTS-30-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

S & F in repair sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia (Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 4.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

S & F in repair sub main wiring with two single core PVC insulated cable with FRLS Copper conductor unsheathed cable of size 2 x 10 sqmm drawn through in and including PVC casing and caping with 1 x 6 sqmm PVC insulated FRLS copper conductor single core for continuous earthing after taking out old unserviceable submain wiring including taking down ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 10.0 Sqmm and one run of 6 Sqmm PVC insulated copper conductor single core shall be measured as single run)

Supply & Fixing in repair sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB

All as per item No 31 above but SPN DBs 4 way. Make :Havells/Indo aisan/Standard/L&T/ABB

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series. Make :Havells/Indo aisan/Standard/L&T/ABB

Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series. Make :Havells/Indo aisan/Standard/L&T/ABB

M/s Bansi Lal

JAWAHAR CONSTRUCTION COMPANY

M/S KRISHNA ENTERPRISES

AKASH ELECTRICALS

VRTRADERS

manoj and company