Provision of Vitrified Tile Flooring At The Engineering Building Ground Floor Corridor Area, First Floor Corridor and Innovation Conference Hall At LCS-Tejas…

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

PAN No.:

Service Tax Registration No.

Goods and service Tax ID No.

Contact Details

Registered Contractor

Related Document to be uploaded to HAL e Portal.

I.T Returns for past 03 Years (Assessment Years)

Related Document to be uploaded to HAL e Portal.

Average Annual Financial Turnover during the last 3 years, ending 31st March 2026 of the previous financial year[should not be less than 30% of Amount put to tender]

TURNOVER IN Rs.

Audited Report duly certified by the Auditor to be enclosed to support the Turnover.

ESI & PF Nos. with proof

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Related Document to be uploaded to HAL e Portal.

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Type of work: [Incase of private works the same shall be supported with TDS certifcate]

Please Enter Details for Work No I.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III.

Details of person holding the Power of Attorney ( if different from the contact person)

Related Document to be uploaded to HAL e Portal.

Documents Need to Uploaded

Related Document to be uploaded to HAL e Portal.

DECLARATION I

DECLARATION II

Related Document to be uploaded to HAL e Portal.

DESCRIPTION

Providing and laying Double charge vitrified tile polished finish in floor with sizes of 600mm x 600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) joint with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. surface preparation, cleaning surfaces, etc., all complete as directed by the Engineer-in-Charge.

Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge

Painting old plastered interior surfaces with one or more coats of low VOC less than 50grams / litre, premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, necessary scaffolding etc. all complete as directed by the Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm ,all complete as directed by the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m outside the division by contractor's own responsibility as per pollution control board or Govt. statutory guidelines. , for all leads including all lifts involved all complete as directed by Engineer in charge.

Total (Exclusive of GST)

Percentage above or below for total value on Sl.No. 6

Total amount after Percentage Sl.No. 6 + Sl.No. 7

GST @ 18% for total value on Sl.No. 8

Total amount (Inclusive of GST) Sl.No. 8 + Sl.No. 9