GE (AF)/SGR-41/2025-26 REPAIR / REPLACEMENT OF VALVE PIT CHAMBERS, JOINTS, LAGGINGS AND OTHER CONNECTED WORKS AT DOMESTIC AREA UNDER GE (AF) SRINAGAR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying CI / DI / GI of pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft / loose soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm, complete all as specified and directed.

Removal of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

Disconnecting and taking up or down old unserviceable GI / MS tubing of following sizes from trenches / wall including fittings etc., complete all as specified and directed. Note: Excavation and earthwork shall be measured and paid separately.

100mm bore

80mm bore

50mm bore

40mm bore

25mm bore

20mm bore

15mm bore

Supply laying, jointing and testing mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches of following bore, complete all as specified and directed. Note :- (i) Excavation and earthwork shall be measured & paid separately under appropriate item. (ii) All fittings required for laying / fixing shall be brought by the contracor and cost there of shall deemed to be included in the quoted rates.

100mm bore

80mm bore

50mm bore

40mm bore

25mm bore

20mm bore

15mm bore

Re-fixing only old steel water tubing as retrieved from Ser item No 4.00 here in above of following bore and connection in new or old position, cleaning / removing blockage / leakage including the provision of new fittings and fixtures, complete all as specified and directed. Note :-(i) All required T&P and fittings will be arranged by contractor for cleaning / removing / leakage / blockage the GI tubing portion of pipes. (ii) Excavation & earthwork shall be measured & paid separately under appropriate item.

100mm bore

80mm bore

50mm bore

40mm bore

25mm bore

20mm bore

15mm bore

Taking up 150mm bore dia DI / CI water mains (including all fittings), with Spigot and Socket ends and lead joints including burning out joints, complete all as specified and directed. Note: Excavation & earthwork shall be measured & paid separately under appropriate item.

All as per Ser item No 7.00 here in above but of size 100mm bore.

Relaying cast iron pipes as retrieved from Ser item No 7.00 here in above of 150 mm bore diameter with Spigot and Socket ends after cleaning internal surface of serviceable pipes by using of wire brush and cleaning thoroughly with fresh water and taking out mud / soft deposited inside the pipes, complete all as specified and directed.

All as per Ser item No 9.00 here in above but of size 100mm bore.

Supply and laying 150mm bore dia CI pipes with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches, complete all as specified and directed.

All as per Ser item No 11.00 here in above but of size 100mm bore.

M&L for CI bends, Tees, collar, Tail piece etc (any type & shape and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for CI pipe upto 150mm dia, complete all as specified and directed.

Supply and laying in trenches ductile iron pipes, socket and Spigot ends of size 150mm bore dia, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329 / 2000 classification K-7 rating, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with bituminous finish coat as per IS:8329 / 2000 including provision of EPDM rubber joints conforming IS: 5382 of 1985, complete all as specified and as directed.

All as per Ser item No 14.00 here in above but of size 100mm bore.

M&L for DI bends, Tees, collar, Tail piece etc (any type & shape and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for DI pipe upto 150mm dia, complete all as specified and directed.

M&L for repairing old run lead joint by burning & removing old run lead from spigot & socketed Cast iron pipe, in any position, filling the same joint by reusing 50% old run lead and balance new run lead, caulking the joints properly to arrest leakage etc, including necessary earth work, excavation as required, for sizes of 150mm bore dia cast iron pipes (lead obtained from ser item No 9.00 & 10.00 will be used) , complete all as specified and directed.

All as per Ser item No 17.00 here in above but of size 100mm bore.

M&L for run lead joint for spigot and socket pipe and complete for 150 mm bore CI pipes, complete all as specified and directed.

All as per Ser item No 19.00 here in above but of size 100mm bore.

S&F in repairs 100mm dia CI sluice valve with stainless steel spindle and iron wheel head, heavy duty ISI marked class PN-1.6 including flanged joints with packing materials, nuts, bolts, etc., complete all as specified and directed.

S&F in repairs 150mm dia CI sluice valve with stainless steel spindle and iron wheel head, heavy duty ISI marked class PN-1.6 including flanged joints with packing materials, nuts, bolts, etc., complete all as specified and directed.

S&F in repairs 150mm dia Non return valve heavy duty ISI marked including flanged joints with packing materials, nuts, bolts, etc., complete all as specified and directed.

S&F in repairs 100mm dia Non return valve heavy duty ISI marked including flanged joints with packing materials, nuts, bolts, etc., complete all as specified and directed.

S&F 20mm bore GI tubes, medimum grade, with all fittings including clamps and fixed to walls and ceilings or cutting chases in wall and making good to disturbed portion of wall including taking down old pipe, complete all as specified and directed.

M&L for Lagging to 15mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm including taking down of old lagging if required, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm including taking down of old lagging if required, complete all as specified and directed.

M&L for Lagging to 25mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm including taking down of old lagging if required, complete all as specified and directed.

Taking down 15mm bore galvanised iron water tubing, medium grade, and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures, complete all as specified and directed.

Taking down 20mm bore galvanised iron water tubing, medium grade, and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures, complete all as specified and directed.

Taking down 25mm bore galvanised iron water tubing, medium grade, and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures, complete all as specified and directed.

S&F in repairs 50mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F in repairs 40mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F in repairs 25mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F in repairs 20mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1,03,205.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S LATIF AHMED MIR (BID ID -3394532)

M/S TARIQ AHMAD RATHER (BID ID -3398881)

M/S NEW FAROOQ TRADERS (BID ID -3398840)

M/S KHAN ENTERPRISES (BID ID -3406737)